Инструкция на Вентиляционные компактные тепловые насосы Nibe серии F130. Руководство по эксплуатации.
Смотрите также: Руководство монтажника →
Загружаем документ…
Текст инструкции
-
User manual
NIBE™ F130 LEK Hot water heat pump UHB GB 1433-1 231985
-
Quick guide
Navigation Ok button (confirm/select) Up/down buttons (move/increase/reduce) Back button (back/undo/exit) A detailed explanation of the button functions can be found on page 10. How to scroll through menus and make different settings is described on page 13. Increase hot water volume true off 1X 2X…
-
Table of Contents
1 Important information 2 Installation data Safety information Serial number Contact information F130 – An excellent choice The heating installation – the heart of the house 8 Heat pump function Contact with F130 Maintenance of F130 F130 – at your service 18 Set the ventilation Set the hot water…
-
1 Important information
Installation data Product F130 Serial number Installation date Installer No. Name De- Set fault settings 5.1.5 Fan (fan speed, normal mode) Exhaust air fan installation 70% ✔ Accessories Serial number must always be given Certification that the installation is carried out according to instructions…
-
Safety information
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards…
-
Marking
F130 is CE marked and fulfils IP21. The CE marking means that NIBE ensures that the product meets all regulations that are placed on it based on relevant EU directives. The CE mark is obligatory for most products sold in the EU, regardless where they are made. IP21 means that the product can be…
-
Contact information
AT KNV Energietechnik GmbH, Gahberggasse 11, 4861 Schörfling Tel: +43 (0)7662 8963-0 Fax: +43 (0)7662 8963-44 E-mail: mail@knv.at www.knv.at CH NIBE Wärmetechnik AG, Winterthurerstrasse 710, CH-8247 Flurlingen Tel: (52) Fax: (52) E-mail: info@nibe.ch www.nibe.ch CZ Druzstevni zavody Drazice s.r.o…
-
Tel: Fax: E-mail: sekretariat@biawar.com.pl www.biawar.com.pl RU © "EVAN" 17, per. Boynovskiy, Nizhny Novgorod Tel./fax +7 E-mail: info@evan.ru www.nibe-evan.ru SE NIBE AB Sweden, Box 14, Hannabadsvägen 5, SE-285 21 Markaryd Tel: +46-(0)433-73 000 Fax: +46-(0)433-73 190 E-mail: info@nibe.se…
-
F130 is part of a new generation of heat pumps that have been introduced to supply your home with inexpensive and environmentally friendly hot water. Hot water production is safe and economical with an external water heater and integrated control system. F130 is equipped with a control computer to…
-
2 The heating installation – the
-
Heat pump function
The heat pump uses the heat that is in the air to heat up the domestic hot water. The conversion of the air's energy to hot water occurs in three different circuits. From the outgoing exhaust air, surrounding air or indoor air, (1), free heat energy is retrieved and transported to the heat pump. In…
-
Contact with F130
Display unit A B C D E There is a display unit on F130, which is used to communicate with F130. Here you: ■ set the hot water and ventilation, if any, as well as adjust the heat pump to your needs. ■ receive information about settings, status and events. ■ see different types of alarms. 10 A Display…
-
D
OK button E Up and down buttons The OK button is used to: ■ confirm selections of sub menus/options/set values. With the up and down buttons you can: ■ scroll in menus and between options. ■ increase and decrease the values. Menu system When F130 is started you come to the information menu. Basic…
-
Main menu
ventilation HOT WATER INFO MY SYSTEM The menu system's main menus are shown here. Menu 1 ventilation Setting the ventilation. See page 18. Menu 2 HOT WATER Setting and scheduling hot water production. See page 19. Menu 3 INFO Display of temperatures and other operating information and access to the…
-
Symbol
Description This symbol appears when "scheduling" is activated in menu 2.3. This symbol appears when "holiday setting" is activated in menu 4.7. Operation To move the cursor, press the up or down button. The marked position is brighter and/or has a turned up tab. Selecting menu To advance in the…
-
Setting a value
periodic increase 2.9.1 activated period days Next increase Adjustable value To set a value: 1. Mark the value you want to set using the up or down button. 2. Press the OK button. The background of the value becomes green, which means that you have accessed the setting mode. 3. Press the up button…
-
Scroll through the windows
A menu can consist of several windows. Mark the page number, using the up and down keys, in the upper left corner and then press the OK button to switch between the windows. Current menu window Number of windows in the menu Scroll through the windows in the start guide start guide 5.7 time & date…
-
Maintenance of F130
Regular checks Your heat pump requires minimal maintenance after commissioning. On the other hand, it is recommended that you check your installation regularly. If something unusual occurs, messages about the malfunction appear in the display in the form of different alarm texts. See alarm…
-
Cleaning the air filter
Clean the F130's air filter regularly, how often depends on the amount of dust in the ventilation air. 1. Switch off the fan in F130 by holding the standby button for 3 seconds. (Display turns off.) 2. Pull out the filter cassette. 3. Take out the filter and shake/vacuum off any dirt. Do not use…
-
Set the ventilation Menu 1 ventilation This menu is only shown with exhaust air installation. Setting range: normal and speed 1-4 Default value: normal ventilation 1 normal (70%) fan speed 1 (30%) fan speed 2 (50%) fan speed 3 (70%) fan speed 4 (90%) The ventilation in the accommodation can be…
-
Set the hot water capacity
Overview Sub-menus For the menu HOT WATER there are several sub-menus. Status information for the relevant menu can be found on the display to the right of the menus. temporary lux Activation of temporary increase in the hot water temperature. Status information displays “off" or what length of time…
-
Caution
If comfort mode "luxury" is selected in menu 2.2 no further increase can be carried out. The function is activated immediately when a time period is selected and confirmed using the OK button. The remaining time for the selected setting is shown to the right. When the time has run out F130 returns…
-
Activated
scheduling 2.3 activated all mon tues we thur fri sat sun Day 05:30 05:30 05:30 05:30 05:30 05:30 05:30 Time period 06:00 06:00 06:00 06:00 06:00 06:00 06:00 economy economy economy economy economy economy economy Comfort mode Activated: Scheduling for the selected period is activated here. Set…
-
advanced advanced 2.9 Menu advanced has orange text and is intended for the advanced user. This menu has a sub-menu. periodic increase Menu 2.9.1 periodic increase period periodic increase 2.9.1 Setting range: 1 - 90 days Factory setting: activated, 14 days activated period days Next increase To…
-
Get information
Overview Sub-menus For the menu INFO there are several sub-menus. No settings can be made in these menus, they just display information. service info shows temperature levels and software versions in the heat pump. INFO 3 service info compressor info alarm log compressor info shows operating times…
-
Menu 3.4 compressor info Information about the compressor’s operating status and statistics can be obtained here. No changes can be made. compressor info 3.2 status: number of starts: tot. operating time: active 24 321 hrs alarm log To view the run status in the event of an alarm, mark the alarm and…
-
Adjust the heat pump
Overview Sub-menus For the menu MY SYSTEM there are several sub-menus. Status information for the relevant menu can be found on the display to the right of the menus. time & date Setting current time and date. Status information displays the time. MY SYSTEM 4 time & date 15:43 language Swedish…
-
language Menu 4.7 holiday setting language 4.6 Choose the language that you want the information to be displayed in here. To reduce energy consumption you can schedule a reduction in hot water temperature and any ventilation. Vacation scheduling starts at 00:00 on the start date and stops at 23:59…
-
alarm This menu is only available if an alarm has occurred. alarm 291 charge pump Here you can reset any alarms that have occurred in F130. reset alarm no Menu 4.9 yes advanced advanced 4.9 Menu advanced has orange text and is intended for the advanced user. This menu has a sub-menu. factory setting…
-
4 Disturbances in comfort
In most cases, the heat pump notes operational interference (operational interference can lead to disturbance in hot water comfort) and indicates this with an alarm in the display. Info-menu All these measurement values are stored under menu 3.1 in the heat pump menu system. Looking through the…
-
NOTE
Always give the heat pump's serial number when contacting your installer. Alarm list Sensor alarm for example BT6/BT13/BT77: The sensor has lost contact with the accessory card or is broken. The alarm resets automatically after correct connection. ■ Contact your installer! Communication alarm…
-
Troubleshooting
If the operational interference is not shown in the display the following tips can be used. Basic actions Start by checking the following possible fault sources: ■ That the display is lit or that the supply cable to F130 is connected. ■ Group and main fuses of the accommodation. ■ The property's…
-
Gurgling sound
■ Not enough water in the water seal. ■ Refill the water seal with water. ■ Choked water seal. ■ Check and adjust the condensation water hose. Chapter 4 | Disturbances in comfort NIBE™ F130 31
-
5 Technical data
Detailed technical specifications for this product can be found in the installation manual (www.nibe.eu). 32 Chapter 5 | Technical data NIBE™ F130
-
6 Glossary
Circulation pump Pump that circulates liquid in a pipe system. Compressor Compresses the gas state refrigerant. When the refrigerant is compressed, the pressure and the temperature increase. Condenser Heat exchanger where the hot gas state refrigerant condenses (cools and becomes a liquid) and heats…
-
oration, the refrigerant absorbs heating energy and during condensing,
gives off heating energy. Supply temperature The temperature of the heated water that the heat pump sends out to the heating system. The colder the outdoor temperature, the higher the supply line temperature becomes. 34 Chapter 6 | Glossary NIBE™ F130
-
7 Item register
A Adjust the heat pump, 25 C Contact information, 5 Contact with F130, 10 Menu system, 11 Room unit, 10 D Disturbances in comfort Manage alarm, 28 Troubleshooting, 30 F F130 – An excellent choice, 7 F130 – at your service, 18 Adjust the heat pump, 25 Get information, 23 Set the hot water capacity…
-
NIBE AB Sweden
Hannabadsvägen 5 Box 14 SE-285 21 Markaryd info@nibe.se www.nibe.eu 231985
Схемы, таблицы и рисунки — в просмотре документа выше. Клик по номеру страницы открывает её в просмотре.