Инструкции на Тепловые насосы воздух-вода Unical серии HP OWER 260-320RK
Тепловые насосы воздух-вода Unical серии HP OWER 260-320RK. Руководство по монтажу и эксплуатации.
Смотрите также: Руководство пользователя → Коды ошибок: 28 кодов →
Загружаем документ…
Текст инструкции
-
ITALIANO
-
Il manuale delle unità raccoglie tutte le indicazioni relative all’utilizzo ottimale della macchina in condizioni di salvaguardia dell’incolumità dell’operatore. 1. SCOPO E CONTENUTO DEL MANUALE Il manuale si propone di fornire le informazioni essenziali per la selezione, l’installazione, l’utilizzo…
-
3. USO CONSENTITO
• L’azienda esclude ogni responsabilità contrattuale ed extracontrattuale per danni causati a persone, animali o cose, da errori di installazione, di regolazione e di manutenzione, da usi impropri o da una lettura parziale o superficiale delle informazioni contenute in questo manuale. • Queste unità…
-
SICUREZZA E SALUTE DEI LAVORATORI La comunità europea ha emanato alcune direttive riguardanti la sicurezza e la salute dei lavoratori fra le quali: 89/391/CEE, 89/686/CEE, 2009/104/CE, 86/188/CEE e 77/576/CEE, e successive integrazioni/modifiche che ciascun datore di lavoro ha l’obbligo di…
-
Guanti: Durante le operazioni di pulizia e manutenzione è necessario utilizzare appositi guanti protettivi. Mascherina e occhiali: Durante le operazioni di pulizia è necessario utilizzare una mascherina di protezione delle vie respiratorie e occhiali protettivi. 4.3 SEGNALAZIONI DI SICUREZZA L’unità…
-
SCHEDA DI SICUREZZA REFRIGERANTE Denominazione: R32 Maggiori pericoli: Pericoli specifici: Asfissia. La rapida evaporazione può causare congelamento. MISURE DI PRONTO SOCCORSO Non somministrare alcunché a persone svenute. Trasportare all’aria aperta. Ricorrere all’ossigeno o alla respirazione…
-
AVVERTENZE SPECIFICHE GAS R32 Il gas refrigerante R32: • non ha odore; • è infiammabile, ma solo in presenza di fiamme; • può arrivare ad esplosione, ma solo se raggiunge una certa concentrazione nell’aria. È buona norma seguire le seguenti indicazioni: • non fumare nei pressi dell’unità; •…
-
ATTENZIONE: L’unità deve essere installata in modo da permettere la manutenzione e la riparazione. La garanzia non copre costi relativi a piattaforme o a mezzi di movimentazione necessari per eventuali interventi. ATTENZIONE: L’unità deve essere installata lontana e non collegata ad eventuali torri…
-
Sollevamento con carrello elevatore
Sollevamento con funi 5.4 POSIZIONAMENTO E SPAZI TECNICI MINIMI Tutti i modelli della serie sono progettati e costruiti per installazioni esterne. È buona norma creare una soletta di supporto di dimensioni adeguate a quelle dell'unità. Le unità trasmettono al terreno un basso livello di vibrazioni…
-
MODELLO
-
Nel caso di venti con velocità superiori ai 13,9-17,1 m/s (vento forte secondo la
scala Beaufort) si consiglia l’uso di barriere frangivento. Si invita a fare sempre una valutazione di impatto ambientale in base ai dati di potenza e pressione sonora riportati nel capitolo dei dati tecnici e ai limiti di emissioni sonore in base all’area di installazione dell’unità, in riferimento…
-
Le posizioni previste per l'installazione degli antivibranti per ogni tipologia di macchina sono riportate nelle immagini che seguono. 5.7 5.7.1 ACCESSO ALLE PARTI INTERNE Capitoli personalizzati per ogni serie [1] [2] A B Rimuovere i due pannelli di accesso al vano componenti svitando le viti come…
-
Al termine dei lavori, richiudere tutte le coperture rimosse con tutte le viti in dotazione e con le guarnizioni (se predisposte). 5.8 COLLEGAMENTI IDRAULICI Le connessioni idrauliche devono essere eseguite in conformità alle normative nazionali o locali; le tubazioni possono essere realizzate in…
-
CARATTERISTICHE CHIMICO-FISICHE MASSIME CONSENTITE PER L’ACQUA DI IMPIANTO
Ioni cloro (Cl-) Ioni solfato (SO4) Ione solfuro (S) Ioni ammonio (NH4) Silice (SiO2) 5.8.2 < 50 ppm < 50 ppm Nessuno Nessuno < 30 ppm Schema idraulico all’interno dell’unità Si riporta di seguito lo schema idraulico di collegamento all’unità KA1 EV1 RV1 DV1 W-IN W-OUT TE IN1 TE OUT1 P1 AV1 FC1…
-
PER LE UNITA’ A POMPA DI CALORE, IN CLIMA PARTICOLARMENTE RIGIDO, SI CONSIGLIA L’ISTALLAZIONE DELL'ACCESSORIO KA CHE EVITA LA FORMAZIONE DI GHIACCIO SUL BASAMENTO. ATTENZIONE: per le unità a pompa di calore, nel caso in cui non venga utilizzato il sistema di canalizzazione predisposto, una limitata…
-
Nel caso in cui si noti una perdita d’acqua è obbligatorio sostituire il componente, svitandolo con una chiave, come mostrato nell’immagine sottostante. 5.9 COLLEGAMENTI ELETTRICI Verificare che l’alimentazione elettrica corrisponda ai dati nominali dell’unità (tensione, fasi, frequenza) riportati…
-
Accesso al quadro elettrico Di seguito è illustrata la procedura per l'accesso al quadro elettrico [1] [2] A B Rimuovere i due pannelli di accesso al vano componenti svitando le viti come riportato in figura 1 Per accedere alla morsettiera di alimentazione elettrica rimuovere il pannello A svitando…
-
Le unità sono conformi alle specifiche di compatibilità elettromagnetica, il progettista dell’impianto elettrico deve comunque fare le opportune valutazioni per garantire l’assenza di interferenze. 5.9.3 Morsettiera utente La morsettiera di collegamento si trova all'interno del quadro elettrico. Per…
-
Morsettiera GI
Morsetto Collegamento XP-10.1/10.2 Segnalazione compressore XP-11.1/11.2 Segnalazione allarme XP-12.1/12.2 Segnalazione blocco XP-13.1/13.2 Segnalazione stagione XP-10.1/10.2 Segnalazione sbrinamento Tipo Uscita in tensione monofase 230Vac, 50Hz, 5A resistivi, 1 A induttivi. Uscita in tensione…
-
5.10 SCHEMI FUNZIONALI
RL LEGENDA INVC CO/EV EV/CO EEV SV F HC AF RD RL RS RS/RD RD/RS BV CV LR COMPRESSOREVELOCITA'VARIABILE BATTERIAALETTATA SCAMBIATORE APIASTRE VALVOLADI ESPANSIONEELETTRONICA ATTACCO DI CARICA FILTRO DISIDRATATORE RESISTENZACARTER VENTILATOREASSIALE LINEA DI MANDATA LINEA DEL LIQUIDO LINEADI…
-
6. ACCESSORI
Di seguito sono elencati gli accessori standard e opzionali. Descrizione Accessorio Valvola di espansione elettronica x x Circolatore elettronico x x Valvola di sicurezza lato acqua x x Flussostato (segnalazione presenza flusso) x x Sonda accumulo sanitario / Sonda remota x Griglie di protezione…
-
7. AVVIAMENTO
Prima dell’avviamento: Verificare la disponibilità di schemi e manuali della macchina installata. Controllare la disponibilità di schemi elettrico ed idraulico dell’impianto a cui è collegata la macchina. 3. Controllare che i rubinetti di intercettazione dei circuiti idraulici siano aperti. 4.…
-
Il sistema di anticongelamento rimane in funzione se garantita la continuità di fornitura elettrica agli apparecchi Se è prevista l’inattività del sistema per un lungo periodo di tempo è consigliato comunque lo svuotamento idraulico dell’impianto a meno che non sia presente una quantità adeguata di…
-
Dopo le operazioni di manutenzione, prestare attenzione al corretto serraggio del pressacavo predisposto per il passaggio del cavo elettrico di alimentazione. È consigliato far eseguire i controlli e le manutenzioni periodiche da personale specializzato. Il regolamento UE n.517/2014 stabilisce che…
-
Per unità installate in atmosfera aggressiva con alto tasso di sporcamento, la pulizia della batteria deve far parte del programma di manutenzione ordinaria. Su questo tipo di installazioni, tutte le polveri e particolati depositati sulle batterie devono essere rimossi al più presto tramite pulizia…
-
RISCHI RESIDUI Si riportano di seguito i rischi residui correlati alle operazioni di movimentazione, installazione e al normale funzionamento dell’unità. L’eventuale mancato rispetto delle istruzioni/indicazioni riportate nel manuale (delle quali vengono dati i riferimenti in tabella) da parte di…
-
X
X X X X X X X X Mancato rispetto delle indicazioni riportate sul manuale. X X Mancato rispetto delle procedure e/o mancato uso dei DPI da parte del tecnico manutentore. X X Di natura meccanica: taglio/ Nel manuale utente-installatore abrasione causato dalla presenza al capitolo 9 sono indicate le…
-
Normale funzionamento dell'unità
Interazioni con l'unità Rischio residuo Fase di manutenzione Indicazioni / Istruzioni Fase di installazione Pericolo Fase di trasporto Utilizzatore / Attività Operatore Utente Generati da materiali/sostanze: incendio/esplosione causa gas classificato come leggermente infiammabile Nel manuale…
-
Nel manuale utente-installatore
al paragrafo 5.9 si raccomanda di Generati dall’ambiente di utiliz- alimentare elettricamente l'unità zazione della macchina: disturbi tramite una linea e protezioni elettromagnetici causati da dedicate. E' inoltre consigliato interferenza tra apparecchi posti utilizzare un cavidotto indipennelle…
-
DATI TECNICI CARATTERISTICHE TECNICHE Cooling Riscaldamento Compressore Refrigerante Ven latori zona esterna Scambiatore interno Circuito idraulico ŵŝƐƐŝŽŶŝ ƐŽŶŽƌĂ Da ele rici Unità HP_OWER 260RK HP_OWER 320RK Potenza frigorifera (2) min/nom/max kW 12,5 / 26,2 / 27,7 14,8 / 31,4 / 32,7 Potenza…
-
Prestazioni riferite alle seguenti condizioni, in accordo con la norma 14511:2018
(1) Raffreddamento: temperatura aria esterna 35°C; temperatura acqua ing./usc. 12/7°C. (2) Raffreddamento: temperatura aria esterna 35°C; temperatura acqua ing./usc. 23/18°C. (3) Riscaldamento: temperatura aria esterna 7°C b.s. 6°C b.u.; temp.acqua ing./usc. 30/35°C. (4) Riscaldamento: temperatura…
-
Livello di potenza sonora unità esterna Lwa
73 dB(A) Sound power level, outdoors L WA Precauzioni di installazione e manutenzione Precautions for installation and maintenance 77 dB(A) Per le indicazioni relative all’installazione e alla manutenzione riferirsi ai capitoli dedicati nel manuale utente installatore SCHEDA PRODOTTO – SERIE HP_OWER…
-
Tj = temperatura bivalente / bivalent temperature
Pdh kW 17,4 21,3 Tj = temperatura limite di esercizio / Operation limit temperature Pdh kW 15,4 18,8 Pdh kW - - Tbiv °C -7 -7 Pcych kW - - - - - - 0,992 0,993 0,991 0,992 155 158 Per le pompe di calore aria/acqua For air-to-water heat pump : Tj = -15°C (se / if TOL ˂ -20°C) Temperatura bivalente /…
-
Type of energy input
Per le pompe di calore aria/acqua: portata di aria nominale, all'esterno 3 For air-to-water heat pumps: rated air flow rate, outdoors m /h Per le pompe di calore acqua o salamoia/acqua: flusso nominale di salamoia o acqua, scambiatore di calore all'esterno For water- or brine-to-water heat pumps…
-
Tj = -7°C
COPd 1,89 1,9 Tj = +2°C COPd 3,09 3,09 Tj = +7°C COPd 4,03 3,96 Tj = +12°C COPd 5,62 5,51 Tj = temperatura bivalente / bivalent temperature COPd 1,89 1,9 Tj = temperatura limite di esercizio / Operation limit temperature COPd 1,68 1,7 COPd - - -10 -10 - - 60 60 Per le pompe di calore aria/acqua For…
-
PREVALENZE UTILI Di seguito si riportano le curve caratteristiche prevalenza-portata al netto delle perdite di carico del kit idronico. Su ciascuna curva è evidenziato il punto di lavoro ottimale corrispondente alla condizione (1) della tabella dei dati tecnici. L’impianto deve essere progettato in…
-
14.1 CURVE DEI CIRCOLATORI/POMPE
Riportiamo il range delle prevalenze utili che garantisce la macchina durante la modulazione del circolatore. HP_OWER 260RK HP_OWER 320RK
-
EMISSIONI SONORE I livelli sonori si riferiscono ad unità a pieno carico secondo quanto previsto dal Regolamento UE 813/2013. La tolleranza sul valore del livello di potenza sonora totale è di 2 dB(A). Il valore è determinato in accordo con la normativa EN 12102-1:2017, usata in congiunzione con UNI…
-
Temperatura acqua in uscita versione BT
Temperatura ambiente Temperatura acqua in uscita Minima -8°C Modalità pompa di calore Minima -20°C Minima 25°C Modalità pompa di calore per acqua calda sanitaria Temperatura ambiente con acqua a 44°C massimi Minima -20°C Temperatura ambiente con acqua a 60°C massimi Minima -7°C Temperatura acqua in…
-
MODALITÀ ACQUA CALDA SANITARIA
-
The manual of the units contains all the necessary information for optional use of the equipment under safe conditions for the operator. 1. PURPOSE AND CONTENTS OF THE MANUAL This manual provides basic information as to the selection, installation, operation and maintenance of the unit. It is…
-
3. PERMITTED USE
• The company excludes any contractual and extra contractual liability for damage caused to persons, animals or objects, by incorrect installation, setting and maintenance, improper use of the equipment, and the partial or superficial reading of the information contained in this manual. • These…
-
WORKERS' HEALTH AND SAFETY The European Union has issued some directives regarding the safety and health of workers, including:: 89/391/CEE, 89/686/CEE, 2009/104/CE, 86/188/CEE and 77/576/CEE, and subsequent amendments which every employer is obliged to follow and have followed. We observe therefore…
-
Wear safety shoes with non-slip soles, especially in rooms with slippery floor
Gloves: During maintenance or cleaning operations, appropriate protective gloves must be used. Mask and goggles: Respiratory protection (mask) and eye protection (goggles) should be used during cleaning operations. 4.3 SAFETY SIGNS The unit features the following safety signs, wich must be complied…
-
Personal precautions
Environmental precautions: Cleaning methods: Handling: technical measures/precautions: Advice for safe use: Storage: Control parameters: Respiratory protection: Eye protection: Hand protection: Hygienic measures: Colour: Odour: Boiling point: Flash point: Relative gas density (air=1) Relative liquid…
-
• once all the above operations have been completed, a second leak test should be performed
4.7 R32 GAS DISPOSAL The procedures described below may only be performed by skilled technicians or qualified personnel:: • do not dispose of the gas in areas at risk of explosive mixtures forming with air The gas should be disposed of in an appropriate torch with backfiring stop device. Contact the…
-
CAUTION: The unit must be installed so as to allow free movement for repair and maintenance operations. The warranty does not cover costs for platforms or other lifting equipment needed for any interventions. CAUTION: The unit must be installed so as to allow free movement for repair and maintenance…
-
Lifting through forklift truck
Lifting through ropes 5.4 POSITIONING AND MINIMUM TECHNICAL CLEARANCES All models of the range are designed and constructed for outdoor installations. It is advisable to create an adequately sized support base for the unit. The units transmit a small amount of vibrations to the ground: it is…
-
C
MODEL HP_OWER 260RK mm A1 1500 A2 400 B1 400 B2 700 HP_OWER 320RK mm 1500 A2 B1 A B A1 B2 Do not obstruct or cover the ventilation openings. For strong wind installation place refer to the classification of the area according to the Beaufort table. If the value is > 7 (strong wind, average wind…
-
In the event of winds stronger then 13,9-17,1 m/s (strong wind according to the
beaufort scale) the use of wind barriers is recommended. We always invite you to make an environmental impact assessment based on the power and sound pressure data shown in chapter "Technical data" and the sound emission limits based on the installation area of the unit , with reference to the DPCM…
-
The ideal installation positions of the dampers for each type of machine are shown in the below images. 5.7 5.7.1 ACCESSING THE INNER PARTS Costumised chapters for each series [1] [2] A B 1. Remove the two access panels to the components compartment by removing the screws as shown in figure 1.2. To…
-
The above operations must be carried out with the machine switched off and disconnected from the power supply (by means of a disconnecting switch provided by the installer). These operations must be carried out by qualified personnel. On finishing the work, refit all the removed covers with all the…
-
MAXIMUM CHEMICAL-PHYSICAL PROPERTIES ALLOWED FOR THE CIRCUIT WATER
Manganese (Mn) < 0,05 ppm Iron (Fe) < 0,3 ppm Alkalinity (HCO3) 70 – 300 ppm Chloride ions (Cl-) < 50 ppm Sulphate ions (SO4) < 50 ppm Sulphide ions (S) None Ammonium ions (NH4) None Silica (SiO2) < 30 ppm 5.8.2 Hydraulic diagram inside the unit Herein below the hydraulic diagrams for connection to…
-
FOR THE HEAT PUMP UNITS, ESPECIALLY IN VERY COLD CLIMATE REGIONS, IT’S RECOMMENDED TO INSTALL ELEVATION SUPPORTS IN ORDER TO ALLOW ICE FORMATION UNDER THE UNIT WITHOUT DAMAGING IT BY FREEZING. CAUTION: for heat pump units, in the event that the prepared ducting system is not used, a limited amount…
-
Service sleeves The unit is fitted with an air venting valve to automatically remove air that has built up in the circuit, preventing undesirable effects such as premature corrosion and wear, lower performance and low exchange output. The device also features a safety function because, in the event…
-
Access to electric panel The following is the procedure for accessing the electric panel. [1] [2] A B Remove the two access panels to the components compartment by unscrewing the screws as shown in figure 1 2. To access the power supply terminal block, remove panel A by unscrewing the screws as…
-
assessments to ensure the absence of interference
5.9.3 User terminal block The connection terminal block is located under the machine cover. For access, see the instructions. The terminal block must be connected respecting the notes below. The connections shown below are standard. Other connections are given in the MCO manual of the on-machine…
-
Terminal block
Terminal block GI Terminal Connection XP-10.1/10.2 Compressor indication XP-11.1/11.2 Alarm indication XP-12.1/12.2 Block indication XP-13.1/13.2 Season indication XP-10.1/10.2 Defrost indication Type Changeover contact, single-phase voltage 230Vac, 50Hz, 5A resistivi, 1 A inductives. Changeover…
-
5.10.1 FUNCTIONALDIAGRAMS
RL LEGEND INVC CO/EV EV/CO EEV SV F HC AF RD RL RS RS/RD RD/RS BV CV LR VARIABLESPEEDCOMPRESSOR FINNEDBATTERY PLATE EXCHANGER ELECTRONICEXPANSIONVALVE CHARGINGATTACHMENT FILTER DRIER CRANKCASERESISTENCE AXIALFAN SUPPLY LINE LIQUID LINE SUCTION LINE SUCTION/DELIVERY LINE SUPPLY/SUCTION LINE…
-
6. ACCESSORIES
Description Accessory Standard Factory fitted Electronic expansion valve x x Electronic circulator x x Water-side safety valve x x Flow switch (indication of flow presence) x x Domestic hot water storage probe / Remote probe x Finned battery protection grids x Rubber vibratio dampers x x x x KA…
-
SWITCHING ON THE UNIT To supply power to the machine, turn the external handle of the disconnector to ON (“I”). The unit display only switches on if the phase sequence is correct (inspection to be made when commissioning the unit). Wait at least 1 minute between switching the unit off and back on…
-
CAUTION: it is possible that a certain quantity of oil from the compressor is deposited in the pipes of the refrigeration circuit, especially by bends. In case of maintenance operations in which it is necessary to unsolder the pipes, it is strongly recommended to proceed with the cutting of the same…
-
A er the maintenance opera ons, pay a en on to the correct ghtening of the cable gland designed for the passage of the electric power cable. It is recommended to have specialised personnel perform periodical inspec ons and maintenance. The EU regula on n.517/2014 establishes that users must perform…
-
For units installed in an aggressive atmosphere with a high rate of fouling, cleaning of the coil should be part of the routine maintenance programme. On this type of installation, all dust and particles deposited on the batteries must be removed as soon as possible by periodic cleaning in…
-
The procedures for correct unit
handling and installation are indicated on the user-installer Mechanical: crushing caused by manual under chapter 5, with inby the installer to comply the possible instability of the unit dication of the center of gravity, Failure with the installation procedures. during handling of the lifting…
-
The correct maintenance
Mechanical: cut / abrasion procedures are indicated in the Failure to comply with the procecaused by the presence of edges user-installer manual under chap- dures and / or failure to use PPE on the external casing of the ma- ter 9. Paragraph 4.2 recommends by the maintenance technician. chine and /…
-
Generated by materials / sub- The user-installer manual under
stances: fire / explosion causes chapter 5 contains specific indicagas classified as slightly flamma- tions about unit installation place ble and protection devices. Generated by materials / subThe permitted uses of the unit stances: infections caused by are listed in the user-installer bacteria…
-
In the user-installer manual
under paragraph 5.9 is recomGenerated by unit use environmended to power the unit via a ment: electromagnetic disturline and protections. It bances caused by interference dedicated is also recommended to use an between devices placed near the independent duct in order machine and the machine itself.…
-
TECHNICAL DATA TECHNICAL CHARACTERISTICS Cooling Heating Compressor Refrigerant External zone fans Internal heat exchanger Hydronic circuit Noise Level Electrical data Cooling capacity (2) min/nom/max Power input (2) E.E.R. (2) Cooling capacity (1) min/nom/max Power input (1) E.E.R. (1) SEER (5)…
-
Performance reffering to the following conditins, according to standards 14511:2018
(1) Cooling: outdoor air temperature 35°C; in/out water temperature 12/7°C. (2) Cooling: outdoor air temperature 35°C; in/out water temperature 23/18°C. (3) Heating: outdoor air temperature temperatura aria esterna 7°C b.s. 6°C b.u.; in/out water temperature 30/35°C. (4) Heating: outdoor air…
-
average climate conditions
condizioni climatiche più fredde colder climate conditions condizioni climatiche più calde warmer climate conditions condizioni climatiche medie average climate conditions Potenza termica nominale Rated heat output Efficienza energetica stagionale del condizioni climatiche più fredde colder climate…
-
I parametri sono dichiarati per condizioni climatiche medie / Parameters shall be declared for average climate condition Elemento Simbolo Unità Potenza termica nominale Pnominale kW 20 24 Tj = -7°C Pdh kW 17,4 21,3 Tj = +2°C Pdh kW 10,6 13 Tj = +7°C Pdh kW 9,3 11,6 Capacità di riscaldamento…
-
Livello di potenza sonora, all'interno/all'esterno
Sound power level, indoors/outdoors Consumo energetico annuo Annual energy consumption LWA dB(A) - / 73 - / 77 QHE kWh 10282 12365 - - - - 10812 11741 - - Apparecchio di riscaldamento supplementare / Supplementary heater Potenza termica nominale / Rated heater output Psup kW Tipo di alimentazione…
-
Efficienza energetica stagionale del riscaldamento d'ambiente
Seasonal space heating energy efficiency ηs % 123 122 Coefficiente di prestazione dichiarato o indice di energia primaria a carico parziale, con temperatura interna pari a 20°C e temperatura esterna Tj. Declared coefficient of performace or primary energy ratio for part load at indoor temperature…
-
USEFUL HEAD The characteristic head-flow curves net of pressure drops of the hydronic kit are shown below. On each curve the optimal working point corresponding to condition (1) of the technical data table is highlighted. The system must be designed in such a way as to guarantee the nominal flow…
-
CIRCULATOR/PUMP CURVES We report the range of useful heads that the machine guarantees during circulator modulation. HP_OWER 260RK HP_OWER 320RK 16. SOUND EMISSIONS The sound levels refer to a fully loaded units at standard nominal conditions in accordance with EU Regulation 813/2013.The tolerance…
-
16.1 POWER AND SOUND PRESSURE STANDARD
Octave band sound power level Modello HP_OWER 260RK HP_OWER 320RK 63 Hz 125 Hz 250 Hz 500 Hz 1000 Hz 2000 Hz 4000 Hz 53,7 57,7 62,4 62,6 68,9 66,2 62,4 46,6 63,1 66,5 65 67,3 75,9 62 Sound power level Lw(A) [dB(A)] Sound Sound pressure pressure level at level at 1m [dB(A)] 10m [dB(A)] (10) (10) 73…
-
17.4 AMBIENT AIR TEMPERATURE AND SUMMERISED TABLE
The units are designed and built to operate in summer mode, with condensation control, at outdoor air temperatures between -10°C and 48°C. I heat pup mode, the allowed temperature range of the outdoor air is from -20°C to +35°C depending on the outlet water temperature as shown in table below.…
-
DOMESTIC HOT WATER MODE
-
00339374/a - 2 ed. 03/2022
www.unical.eu AG S.p.A. 46033 casteldario - mantova - italia - tel. +39 0376 57001 - fax +39 0376 660556 info@unical-ag.com - export@unical-ag.com - www.unical.eu Unical declina ogni responsabilità per le possibili inesattezze se dovute ad errori di trascrizione o di stampa. Si riserva altresì il…
Схемы, таблицы и рисунки — в просмотре документа выше. Клик по номеру страницы открывает её в просмотре.