Инструкция на Тепловые насосы воздух-вода Unical серии HP QOR 70 - 90 - 120 - 140 -140 T - 160 T. Руководство пользователя.
Смотрите также: Руководство по монтажу и эксплуатации →
Загружаем документ…
Текст инструкции
-
CONTROL
USER MANUAL
-
Scan the QR code to read
the manual in other languages OPERATION MANUAL Scan the QR code to install the control APP.
-
This manual gives detailed description of the precautions that should be
brought to your attention during operation. In order to ensure correct service of the wired controller, please read this manual carefully before using the unit. For convenience of future reference, keep this manual after reading it. CONTENTS 1 GENERAL SAFETY PRECAUTIONS 1.1 About the documentation…
-
4 MENU STRUCTURE
4.1 About the menu structure 4.2 To go to the menu structure BASIC USAGE 5.1 5.2 5.3 5.4 Screen unlock Turning ON/OFF controls Adjusting the temperature Adjusting the operation mode OPERATION 6.1 PRESET TEMPERATUER 6.2 DOMESTIC HOT WATER(DHW) 6.3 SCHEDULE 6.4 OPTIONS 6.5 CHILD LOCK 6.6 SERVICE…
-
1 GENERAL SAFETY PRECAUTIONS
1.1 About the documentation The original documentation is written in English. All other languages are translations. The precautions described in this document cover very important topics, follow them carefully. All activities described in the installation manual must be performed by an authorized…
-
WARNING
Indicates a situation that could result in death or serious injury. CAUTION Indicates a situation that could result in minor or moderate injury. NOTE Indicates a situation that could result in equipment or property damage. i INFORMATION Indicates useful tips or additional information. 1.2 For the…
-
The appliance is not intended for use by persons, including children,
with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children must be supervised to ensure that they do not play with the product.…
-
Units are marked with the following symbol
This means that electrical and electronic products may not be mixed with unsorted household waste. Do not try to dismantle the system yourself: the dismantling of the system, treatment of the refrigerant, of oil and of other parts must be done by an authorized installer and must comply with…
-
2 A GLANCE OF THE USER INTERFACE
2.1 The appearance of the wired controller Enter the menu structure from the home page Turn on or off the space operation mode or DHW mode; turn on or off the function in the menu structure Navigate the cursor on the display/navigate in the menu structure/adjust the settings Come back to the up…
-
2.2 Status icons
Lock icon Weekly schedule icon At the next scheduled action, the desired temp. will decrease. the desired temp. will not change. the desired temp. will decrease. the desired temp. will increase. 7 Timer icon Outdoor ambient temp. WLAN icon Domestic hot water The disinfect function is activated Fan…
-
3 USING HOME PAGES
3.1 About home pages Select your preferred language, then press “ ” to enter the home pages. If you don't press “ ” in 60 seconds, the system will enter in the currently selected language. EN FR IT ES PL PT GE NL RO RU TR GR Based on the system layout, the following home pages may appear: 07
-
Home page 1
If the WATER FLOW TEMP. is set YES and ROOM TEMP. is set NON, the system has the functions including space heating, space cooling and domestic hot water, home page 1 will appear: Without DHW function or DHW mode is set unavailable DHW mode is set available 08
-
Home page 2
If the WATER FLOW TEMP. is set NON and ROOM TEMP. is set YES, the system has the functions including space heating, space cooling and domestic hot water, home page 2 will appear: DHW mode is set available Without DHW function or DHW mode is set unavailable The wired controller should be installed in…
-
Home page 3 :
If the ROOM THERMOSTAT is set DOUBLE ZONE, the system has the functions including space heating, space cooling and domestic hot water, there will be main page and additional page: Main page Main page Addition page Addition page 2 2 Without DHW function or DHW mode is set unavailable DHW mode is set…
-
Home page 4
If the unit has no DHW function or DHW is set unavailable, WATER FLOW TEMP. and ROOM TEMP. are both set YES, the system has the functions including space heating and space cooling, there will be main page and additional page: 2 11
-
NOTE
All the pictures in the manual are for explanation, the actual pages in the screen may have some difference. WATER FLOW TEMP., ROOM TEMP. and DOUBLE ZONE are set in FOR SERVICEMAN, it is not recommended for non-professionals to enter FOR SERVICEMAN. 12
-
4 MENU STRUCTURE
4.1 About the menu structure You can use the menu structure to read out and configure settings that are NOT meant for daily usage, and you can find the detailed operation methods about the menu structure in this manual. If the unit has no DHW function or DHW mode is set unavailable , there is no…
-
5 BASIC USAGE
5.1 Screen unlock The icon " "showing on the screen means the controller is locked. Long press " " , it will disappear, then the controller can be used. Long press " " The controller will be locked if it has not been operated for a long time (about 120 seconds). If the controller is unlocked, long…
-
5.2 Turning ON/OFF controls
Use the controller to turn on or off the operation mode(heat mode , cool mode , auto mode , DHW mode ) of the unit. 1) The unit has DHW function and DHW mode is set available. Press " " to turn on/off space heating/cooling or DHW mode. 15
-
2) The unit has no DHW function or DHW mode is set unavailable
The operation methods of turning on or off the operation mode in other menus is similar. 16
-
5.3 Adjusting the temperature
Use ''◄'', ''►'' to select the operating mode. 17
-
Use ''▼'', ''▲'' to adjust the temperature value
7 The operation methods of adjusting the temperature in other menus (including that the unit has no DHW function or DHW mode is set unavailable) is similar. 18
-
5.4 Adjusting the operation mode
Go to " " > "OPERATION MODE'', then press " will appear: ", the following page OPERATION MODE Operation mode setting: HEAT COOL AUTO A CONFIRM There are three operation modes on the controller interface: HEAT mode, COOL mode and AUTO mode, Use ''◄'', ''►'' to select the mode and press " ". HEAT…
-
If COOL(HEAT) mode is set to NON, only one mode can be selected on
the controller interface, the following page will appear: OPERATION MODE OPERATION MODE Operation mode can only be set heat mode: Operation mode can only be set cool mode: HEAT COOL CONFIRM CONFIRM The operation mode can also be switched by the room thermostat. When “ROOM THERMOSTAT” is set "MODE…
-
When "ROOM THERMOSTAT" is set "ONE ZONE" or "DOUBLE ZONE" in
"FOR SERVICEMAN", the "OPERATION MODE" page is as follows: OPERATION MODE Operation mode setting: HEAT AUTO COOL A CONFIRM Under this circumstance, HEAT mode and COOL mode can be selected, but AUTO mode can not be selected. i INFORMATION It is not recommended for non-professionals to enter "FOR…
-
6 OPERATION
6.1 PRESET TEMPERATUER PRESET TEMPERATUER has 3 items: PRESET TEMP., WEATHER TEMP. SET, ECO MODE. 6.1.1 PRESET TEMP. PRESET TEMP. (PRESET TEMPERATUER) function is used to set different temperature on different time when the heat mode or cool mode is on. The PRESET TEMP. function will be off in the…
-
Use ''◄'', ''► '', ''▼'', ''▲'' to scroll and use "▼", "▲" to adjust the time and
the temperature, press " " to select the timer. Six timers can be selected.( enable the timer. disable the timer.) PRESET TEMPERATURE PRESET TEMP. 1/2 WEATHER TEMP.SET ECO MODE NO. TIME TEMP. 1 08:00 35°C 2 12:00 25°C 3 15:00 35°C CANCEL Example: Set timers according to the table below: NO. TIME…
-
The temperature will change according to the figure below
TEMP. 40°C 35°C 8:00 12:00 15:00 18:00 20:00 23:00 i INFORMATION When double zone is activated, the PERSET TEMP. function only works for zone 1. The PRESET TEMP. function can be used in heat mode or cool mode. But if the operation mode is switched between heat mode and cool mode, the PRESET TEMP.…
-
6.1.2 WEATHER TEMP. SET
WEATHER TEMP. SET (WEATHER TEMPERATURE SET) function is used to preset the desired water flow temperature depending on the outdoor temperature. Take heat mode as an example: the WEATHER TEMP. SET function can lower the desired water flow temperature when the outdoor temperature increases. Go to " "…
-
" to turn on/off the temperature curve. If "ZONE1 C-MODE LOW
TEMP." is turned on, cool mode in zone 1 is activated, the following page will appear: WEATHER TEMP. SET WEATHER TEMP. SET TYPE: CONFIRM The operation method of other temperature curves is similar. If the WEATHER TEMP. SET is activated, the desired temperature can not be adjusted on the interface. i…
-
PRESET TEMPERATURE
PRESET TEMP. WEATHER TEMP. SET 1/2 2/2 PRESET TEMPERATURE ECO MODE PRESET TEMP. WEATHER TEMP. SET ECO MODE ZONE 1 C-MODE LOW TEMP. OFF ZONE 1 C-MODE CURVE OFFSET 0°C ZONE 1 H-MODE LOW TEMP. OFF ZONE 1 H-MODE CURVE OFFSET 0°C ZONE 2 C-MODE LOW TEMP. OFF ZONE 2 C-MODE CURVE OFFSET 0°C ZONE 2 H-MODE…
-
Heating mode-low water temperature
-
The automatic setting curve
-
Cooling mode-high water temperature
-
6.1.3 ECO MODE
ECO MODE is used to save energy. Go to " "> ''PRESTE TEMPERATURE'' >"ECO MODE". Press '' the following page will appear: PRESET TEMPERATURE PRESET TEMP. WEATHER TEMP.SET ECO MODE CURRENT STATE OFF ECO TIMER START OFF 08:00 END 19 :00 ON/OFF Press '' '', the following page will appear: ECO MODE SET…
-
" to turn on/off "CURRENT STATE" or "ECO TIMER" , and use
''▼'', ''▲'' to adjust the start time and end time. PRESET TEMPERATURE PRESET TEMP. WEATHER TEMP.SET ECO MODE CURRENT STATE ON ECO TIMER START OFF 08:00 END 19 :00 ADJUST i INFORMATION ECO MODE is valid only in heat mode (one zone). If the ECO MODE is activated, the desired temperature can not be…
-
6.2 DOMESTIC HOT WATER(DHW)
The parameters in "DOMESTIC HOT WATER(DHW)" can be set only when the unit has DHW function and DHW is set available. If the unit has no DHW function or DHW is set unavailable, "DOMESTIC HOT WATER(DHW)" will not be displayed on the interface. DOMESTIC HOT WATER(DHW) contains the following menu: 1)…
-
" to turn on/off "CURRENT STATE", and use''▼'', ''▲'' to adjust
the operate date and start time of disinfect function. Example: If "OPERATE DAY" is set FRIDAY and "START" is set 23:00, the disinfect function will be activated at 23:00 on Friday. 6.2.2 FAST DHW The FAST DHW function is used to force the system to operate in DHW mode. Once the FAST DHW function is…
-
6.2.3 TANK HEATER
The TANK HEATER function is used to force the tank heater to heat the water in tank. Even if the heat pump system fails, the TANK HEATER function can still be used to heat the water in tank. The TANK HEATER function can be used only when "TBH FUNCTION" is set valid ("TBH FUNCTION" can be set in "FOR…
-
i INFORMATION
If "CURRENT STATE" is OFF, TANK HEATER is invalid. If the T5 (temperature sensor of tank) fails,TANK HEATER is invalid. The TANK HEATER function is valid only for once after it's settled. 6.2.4 DHW PUMP The DHW PUMP function is used to return water from the water net. The DHW PUMP function can be…
-
Use ''◄", ''►'', ''▼'', ''▲'' to scroll and use ''▼'', ''▲'' to adjust the start time,
press " " to select the timer. Twelve timers can be set. ( enable the timer. disable the timer.) DOMESTIC HOT WATER(DHW) 1/2 DISINFECT FAST DHW TANK HEATER DHW PUMP NO. START NO. START T1 00:00 T4 00:00 T2 00:00 T5 00:00 T3 00:00 T6 00:00 Example: Set timers according to the table below: NO. T1…
-
PUMP_D RUNNING TIME is set 30 minutes (PUMP_D RUNNING TIME
can be set in "DHW MODE SETTING" in "FOR SERVICEMAN"). The pump will run according to the figure below: PUMP ON OFF 6:00 6:30 7:00 7:30 8:00 8:30 9:00 9:30 6.3 SCHEDULE SCHEDULE contains the following menu: 1) TIMER 2) WEEKLY SCHEDULE 3) SCHEDULE CHECK 4) CANCEL TIMER 6.3.1 TIMER The TIMER function…
-
SCHEDULE
1/2 WEEKLY SCHEDULE CANCEL TIMER SCHEDULE CHECK TIMER NO. START END MODE TEMP 1 00:00 00:00 HEAT 30℃ 2 00:00 00:00 HEAT 30℃ 3 00:00 00:00 HEAT 30℃ ONE ZONE is valid ZONE2 SCHEDULE ZONE1 SCHEDULE TIMER WEEKLY SCHEDULE CANCEL SCHEDULE CHECK TIMER TEMP NO. START END MODE TEMP 30℃ 1 00:00 00:00 HEAT 30℃…
-
Go to "
appear: "> "SCHEDULE">"TIMER". Press '' '', the following page will SCHEDULE 1/2 TIMER WEEKLY SCHEDULE CANCEL SCHEDULE CHECK TIMER NO. START END MODE TEMP 1 00:00 00:00 HEAT 40℃ 2 00:00 00:00 HEAT 40℃ 3 00:00 00:00 HEAT 40℃ Use ''◄", ''►'', ''▼'', ''▲'' to scroll and use ''▼", ''▲'' to adjust the…
-
DHW COOL 18:00 HEAT 15:00 COOL 13:00 14:00 11:30 HEAT 9:00 7:00 1:00 3:00 DHW The unit will run according to the figure below: 6.3.2 WEEKLY SCHEDULE(Take ONE ZONE as an example) The WEEKLY SCHEDULE function is used to set different operation mode and temperature within one week (One day or more). If…
-
Press '' '' again, “MON” is selected as shown below. It means Monday has
been selected. SCHEDULE TIMER WEEKLY SCHEDULE CANCEL SCHEDULE CHECK TIMER MON. TUE. WED. THU. FRI. SAT. SUN. ENTER CANCEL MON SELECT Then use " ▼ " to move cursor to “ENTER”, press " temperature of Monday can be set. ", operation mode and The following page will appear: 1/2 SCHEDULE TIMER WEEKLY…
-
6.3.3 SCHEDULE CHECK (Take ONE ZONE as an example)
The SCHEDULE CHECK function is used to check the weekly schedule. Go to " " > '' SCHEDULE" > "SCHEDULE CHECK". Press '' '', the following page will appear: WEEKLY SCHEDULE CHECK DAY MON NO MODE SET START END T1 HEAT 30℃ 00:00 00:00 T2 T3 HEAT 30℃ HEAT 30℃ 00:00 00:00 00:00 00:00 T4 HEAT 30℃ 00:00…
-
6.4 OPTIONS
OPTIONS contains the following menu: 1) SILENT MODE 2) HOLIDAY AWAY 3) HOLIDAY HOME 4) BACKUP HEATER 6.4.1 SILENT MODE The SILENT MODE function is used to reduce the running sound of the unit. However, it also reduces the heating or cooling capacity of the system. There are two silent mode levels…
-
'' to turn on/off current state of SILENT MODE, Timer1 and Timer2,
use "▼", "▲" to select the silent level and adjust the start/end time of the timer. There are two methods to use the silent mode: 1) Silent mode all the time. 2) Silent mode related to timers. If the CURRENT STATE is ON, TIMER1 and TIMER2 are both OFF, the unit will run in silent mode all the time.…
-
OPTIONS
SILENT MODE 1/2 HOLIDAY HOLIDAY BACKUP AWAY HOME HEATER CURRENT STATE OFF DHW MODE ON DISINFECT ON HEAT MODE ON ON/OFF Use '' '' to turn on/off current state of HOLIDAY AWAY, HEAT mode(DHW mode) and DISINFECT mode, use"▼", "▲" to adjust the start and end time of the holiday. DHW=Domestic hot water.…
-
6.4.3 HOLIDAY HOME
The HOLIDAY HOME function is used to set different operation mode and temperature during the holiday at home. Go to " " > "OPTIONS" > "HOLIDAY HOME". Press '' '', the following page will appear: OPTIONS OPTIONS SILENT MODE HOLIDAY HOLIDAY BACKUP AWAY HOME HEATER CURRENT STATE OFF SILENT MODE HOLIDAY…
-
SCHEDULE SILENT HOLIDAY HOLIDAY HOME MODE AWAY BACKUP HEATER NO. START END MODE TEMP 1 00:00 00:00 HEAT 30℃ 2 00:00 00:00 HEAT 30℃ 3 00:00 00:00 HEAT 30℃ i INFORMATION If "HOLIDAY AWAY" and "HOLIDAY HOME" are both set, and "HOLIDAY HOME" is set later than "HOLIDAY AWAY", then the "HOLIDAY HOME"…
-
6.4.4 BACKUP HEATER
The BACKUP HEATER function is used to turn on the backup heater forcibly, it can be used only when IBH (Backup heater) is set valid by DIP switch on the main control board of hydraulic module or AHS (Auxiliary heating source)FUNCTION is set valid in "OTHER HEATING SOURCE" of "FOR SERVICEMAN" on the…
-
6.5 CHILD LOCK
2.make The CHILD LOCK function is used to avoid children’s misoperation. If the unit has no DHW function or DHW is set unavailable, "DHW TEMP. ADJUST" and "DHW MODE ON/OFF" will not be displayed on the interface. Go to " " >"CHILD LOCK", then input the password "123", press " ", the following page…
-
SERVICE
sure6.6you are INFORMATION next to home appliances. SERVICE INFORMATION contains the following menu: 1) SERVICE CALL 2) ERROR CODE 3) PARAMETER 4) DISPLAY 2.4GHz band wireless signal is enabled on your wireless 1 6.6.1 SERVICE CALL The SERVICE CALL function is used to show the service phone or…
-
6.6.2 ERROR CODE
The ERROR CODE function is used to show when the fault or protection happened and show the meaning of the error code. Go to " ">"SERVICE INFORMATION" >"ERROR CODE", press " ", the following page will appear: s router. SERVICE INFORMATION 1/2 SERVICE ERROR PARAMETER DISPLAY CALL CODE Register or…
-
6.6.3 PARAMETER
The PARAMETER function is used to display the main parameters. Go to " ">"SERVICE INFORMATION" >"PARAMETER", the following page will appear: SERVICE INFORMATION SERVICE INFORMATION 1/2 2/2 SERVICE ERROR PARAMETER DISPLAY CALL CODE SERVICE ERROR PARAMETER DISPLAY CALL CODE ROOM SET TEMP. 26℃ MAIN…
-
6.7 OPERATION PARAMETER
The OPERATION PARAMETER function is for installer or service engineer to review the operation parameter. You can check the water temperature, water flow, pressure and other parameters by using "OPERATION PARAMETER". i INFORMATION 1. POWER CONSUM is for reference only, not used to judge the actual…
-
6.8 FOR SERVICEMAN
The FOR SERVICEMAN function is for the installer to set the parameters. Go to " " > "FOR SERVICEMAN", the password is "234". It is not recommended for non-professionals to enter "FOR SERVICEMAN". 6.9 SN VIEW The SN VIEW function is used to view the SN code. SN VIEW SN VIEW IDU NO. HMI NO. ODU NO. 55…
-
7 NETWORK CONFIGURATION GUIDELINES
The wired controller realizes intelligent control with a built-in module, which receives control signal from the APP. Before connecting the WLAN, please check for it if the router in your environment is active and make sure that the wired controller is well-connected to the wireless signal. During…
-
"> "WLAN SETTING"> "AP MODE". Press" " the following page will appear: AP MODE Do you want to activate the WLAN network and exit? NO YES CONFIRM Use ''◄'', ''►'' to move to"YES", press " " to select AP mode. Select AP Mode correspondingly on the mobile device and continue the follow-up settings…
-
> “RESTORE WLAN SETTING” . Press" ", the following page will appear: ”> “WLAN SETTING” RESTORE WLAN SETTING Do you want to restore the WLAN setting and exit? NO YES CONFIRM Use ''◄'', ''►'' to move to "YES", press ” ” to restore WLAN setting. Complete the above operation and wireless configuration…
-
7.2 Smart home appliances networking guidelines
1 Download MSmartLife App Scan the QR code below, or search for "MSmartLife" in Google play(Android devices) or App Store (ios devices) to download the app; MSmartLife 59
-
Register or Login account Open the app and create a user account, if you already have one, just log in. 3 Login Enter email Enter password Login Login Wi-Fi Sta 60
-
Add your appliance 4 Add your appliance TapTap thethe"+"icon add home appliance to "+"icon toto add home appliance to your MsmartLife account. 3 your MsmartLife account MSmartLife Indicatio atus Light Slowly flashing Waiting for connection quickly Flashing 61 with your Conecting AP
-
Connected to the network
4 Connected to the network Follow theFollow instrctions in theinapp totoset upthe WiFi the the instructions the app set up connection.If the network connection fails, please refer to Wi-Fi connection. the network connection the App tipsIffor operation. fails, please refer to the App tips for…
-
Notes on networking
When networking the product, please make sure that the mobile phone is as close as possibleto the product. According to the App tips, if the product only supports 2.4GHZ wifi communication, please note that the 2.4GHz network is selected for connection. Midea recommends WiFi router SSID names…
-
Warning and troubleshooting
for networking failures When the product is connected to the network, please make sure that the phone is as close as possible to the product. We only support 2.4GHz band routers at present. Special characters (punctuation, spaces, etc.) are not recommended as part of the WLAN name. It is recommended…
-
00339596EN -1 ed. 04/2022 www.unical.eu 46033 casteldario - mantova - italia - tel. +39 0376 57001 - fax +39 0376 660556 info@unical-ag.com - export@unical-ag.com - www.unical.eu Unical declines every responsibility for the possible inaccuracies if owed to errors of transcript or press. Also…
Схемы, таблицы и рисунки — в просмотре документа выше. Клик по номеру страницы открывает её в просмотре.