Инструкция на Пульт дистанционного управления кондиционерами Sinclair серии YAP1F6

Текст инструкции

1. Стр. 6 Buttons on remote controller

   2 4 ON/OFF button 2 MODE button 3 FAN button 4 TURBO button 5 ▲/ ▲ 1 1 button 6 button 7 button 8 T-ON / T-OFF button 9 I FEEL button 3 10 CLOCK button 5 11 SLEEP button WiFi button button 13 14 LIGHT button 15 TEMP button Introduction for icons on display screen { Set fan speed (No fan speed. It’s…

2. Стр. 7 Note

   ● This is a general use remote controller, it could be used for the air conditioners with multifunction; For some function, which the model doesn't have, if press the corresponding button on the remote controller that the unit will keep the original running status. ● After putting through the power…

3. Стр. 8 Note

   ● For preventing cold air, after starting up heating mode, indoor unit will delay 1~5 minutes to blow air (actual delay time is depend on indoor ambient temperature). ● Set temperature range from remote controller: 16~30℃ (61-86°F); Fan speed: auto, low speed, low-medium speed,medium speed…

4. Стр. 9

   (Refer to CLOCK, T-ON, T-OFF buttons) When setting T-ON, T-OFF or CLOCK press "▲" or " " button to adjust time. (Refer to CLOCK,T-ON, T-OFF buttons) ▲ ▲ 6 button Press this button can select left & right swing angle. Fan blow angle can be selected circularly as below: no display (stops at current…

5. Стр. 10

   ● T-ON button "T-ON" button can set the time for timer on. After pressing this button, " " icon disappears and the word "ON" on remote controller blinks. Press "▲" or " " button to adjust T-ON setting. After each pressing "▲" or " " button, T-ON setting will increase or decrease 1min. Hold "▲" or "…

6. Стр. 11 10 CLOCK button

   Press this button to set clock time. " " icon on remote controller will blink. Press "▲" or " " button within 5s to set clock time. Each pressing of "▲" or " " button, clock time will increase or decrease 1 minute. If hold "▲" or " " button, 2s later, time will change quickly. Release this button…

7. Стр. 12 14 LIGHT button

   Press this button to turn off display light on indoor unit. " " icon on remote controller disappears. Press this button again to turn on display light. " " icon is displayed. 15 TEMP button By pressing this button, you can see indoor set temperature, indoor ambient temperature or outdoor ambient…

8. Стр. 13 Function introduction for combination buttons

   Energy-saving function Under cooling mode, press "TEMP" and " CLOCK" buttons simultaneously to start up or turn off energy-saving function. When energy-saving function is started up, "SE" will be shown on remote controller, and air conditioner will adjust the set temperature automatically according…

9. Стр. 14 Operation guide

   1. After putting through the power, press "ON/OFF" button on remote controller to turn on the air conditioner. 2. Press "MODE" button to select your required mode: AUTO, COOL, DRY, FAN, HEAT. 3. Press "▲" or " " button to set your required temperature. (Temperature can’t be adjusted under auto…

Схемы, таблицы и рисунки — в просмотре документа выше. Клик по номеру страницы открывает её в просмотре.