Инструкция на Руководство по монтажу автоматики C8 приточно-вытяжных установок DOMEKT: подключение, электрические схемы, ввод в эксплуатацию. Документ на английском языке.
Руководство пользователя автоматики C8 установок DOMEKT: функции, управление с пульта и через веб-интерфейс, настройки, неисправности и их устранение. Документ на английском языке.
Смотрите также: Инструкция по транспортировке, монтажу и эксплуатации →
Загружаем документ…
Текст инструкции
-
komfovent
DOMEKT C8 AUTOMATION USER MANUAL
-
LT – Prieš montuodami vėdinimo įrenginį atsisiųskite „Montavimo instrukciją“ / EN – Before installing air handling unit download „Installation manual“ / CZ – Před instalací vzduchotechnické jednotky si stáhněte „Instalační příručku“/ DA – Før installation af luftbehandlingsenheden, download…
-
1. INTRODUCTION
The air handling unit is designed to ensure good ventilation of premises. Air handling unit removes indoor air containing carbon dioxide, various allergens or dust, while replacing it with filtered fresh air from outside. As the outside air is usually colder or warmer than the air within the…
-
2.2. Standard operating modes
4 standard operating modes are available on your air handling unit. Each operating mode has preset air volume and desired temperature values: AWAY NORMAL INTENSIVE BOOST Ventilation intensity 20% 50% 70% 100% Set temperature 20°C 20°C 20°C 20°C These settings may be changed (see “Control and…
-
2.5.1. Weekly operation schedule
If you want the unit to operate when you need it, you can create a weekly operation schedule. The unit has 3 default weekly operation schedules tailored to different situations. Also, you can create your own schedule: Working week Office At night the unit operates in AWAY operation mode, and in the…
-
Internal fire alarm function stops the air handling unit when air temperature increase is detected inside the unit. This can happen, for example, when hot smoke enters the duct system from fire zones both inside and outside the building. This function prevents smoke from spreading inside the…
-
Condensate prevention on the units with rotary heat exchanger1
If there is high humidity in the exhaust air (for example in a newly built house), in winter condensate can start to accumulate inside the unit and eventually will freeze. The protective function will automatically reduce the ventilation intensity in winter, in cases when indoor humidity is too high…
-
3.1. Control panel C6.1
Panel with a colour touch-sensitive display. This control panel is designed for indication and changing of various functions and settings of the unit. If the unit is connected to the mains, the control panel will display home screen or a screen saver that you can switch off with a single tap.…
-
Displayed symbols on the panel
Fan operation ECO mode on. Free cooling operation. Energy recovery operation ECO mode on. Free heating operation. Air heater operation Alarm signal (see the troubleshooting section) Air cooler operation Supply air There is a heating demand, but it is being blocked by the ECO mode Exhaust air There…
-
3.1.2. Turning on
The unit must be switched on to operate by a selected ventilation mode, schedule or air quality. To turn on your air handling unit: 1. Press the ON/OFF button in the centre of the home screen. 2. Confirm the message that appears. 3. A symbol will appear in the centre of the home screen indicating an…
-
3.1.5. Mode change
To turn on a standard ventilation mode: 1. Press an icon indicating the current operation mode in the middle of the home screen. 2. Select and press a desired operation mode. 3. An icon for the selected operation mode appears in the middle of the home screen. Operation modes 16:30 AWAY NORMAL…
-
3.1.6. Air quantity and temperature settings
You can set air flow for supply and exhaust air, desired temperature and turn off/on an electric heater for each ventilation mode. If turned off, the heater will not turn on even when the desired temperature is not reached. If turned on, the heater will operate only when a heat exchanger alone…
-
3.1.8. ECO mode activation and settings
ECO mode may be activated in any ventilation mode by pressing ECO button at the bottom of the home screen. For more information about the ECO mode see chapter “Air Quality Control Functions”. ECO 16:30 5s ECO Heater blocking On Min. supply air temperature 15,0 °C Cooler blocking On Max. supply air…
-
To create a weekly operation schedule
1. Select a weekly schedule “My week” as shown in Chapter “Mode Change”. 2. Press the centre of the schedule window and hold for 5 seconds. 3. Press the weekday row to select which days of the week this schedule sheet is valid for. 4. Press + symbol and add a new row. 5. Press the ventilation mode…
-
Language – set a desired control panel language using arrows
Flow measurement units – select units for air flow measurement. Settings Language Lietuvių Settings Flow units m3/h l/s English Русский Screen saver – turn the screen saver on/off. Screen saver activates when a control panel is not used for longer than 1 min. You may select brightness of a screen…
-
Time/Date – setting the time and date that are used for a weekly operation schedule or other functions. Time/Date Time 14:02 Month/Day 12/10 Year 2018 Remote control – settings for remote access to the air-handling unit. Remote control Device owner domekt@komfovent.com Privacy agreement Remote…
-
Temperature control – select a method for temperature control (see Chapter 2.1)
Temperature control Temperature control Temperature control Temperature control Supply Temperatūros palaikymas Tiekimas Supply Room thermostat Off Extract Room Balance Room thermostat – here you can set parameters for proper operation of the thermostat function (see “Thermostat function”). You can…
-
Air quality control – here you can activate and set-up air quality control which will be used in AUTO mode (see Chapter 2.5.2). Air quality control Air quality control Impurity control On Maximum intensivity 70 % Humidity control On Check period 2h Sensor 1 CO2 Outdoor humidity None Minimum…
-
Control sequence – here you can activate additionally connected duct-mounted heating or cooling devices (see “Installation Manual”) that will operate only when a heat exchanger or electrical heater alone cannot reach a desired temperature. Control sequence Stage 1 Electric heater Control sequence…
-
• Icing protection on R units – the icing protection function has the following settings
On – automatic icing protection is activated by default and will reduce ventilation intensity if needed (see “Advanced settings”). Off – icing protection will not work and user-defined airflow will be maintained. Control sequence Icing protection Stage 1 Electric heater Off Stage 2 On External coil…
-
„Status“ line shows connection between AHU and internet
• Disconnected – AHU is not connected to LAN or internet network. • No internet access – AHU is connected to LAN network and communicates with router, but internet is not accessible. • Connected – AHU has internet access. In the „Modbus RTU“ line, it can be selected what device is connected to the…
-
3.1.12. Alarms
Messages appearing during operation are indicated by a red warning symbol in the home screen. Device operation may be stopped given the severity of a fault message. To read a message, press OVERVIEW section in the menu. You can also delete current alarms or view a recorded history of faults (up to…
-
3.2. Control panel C6.2
Simple and user-friendly control panel for intuitive navigation and control of the unit. This control panel offers 4 standard operation modes (see Chapter 2.2) and switching ON/OFF with a touch of a button without any additional settings (settings are pre-set in the factory). This control panel is…
-
3.3. Control via smartphone
To control the unit via a smartphone, the “Komfovent Control” app is required. Before using the app, you will need to create an account and sign in. This can be done by visiting the control.komfovent.com website or directly within the app. Portal Portal REGISTER LOG IN Create a new account Email…
-
On your smartphone (the phone must have internet access), open the “Komfovent Control” app. If you are the owner of the ventilation unit, the built-in wizard in the app will help you add your first unit. To add a unit, you will need to scan a QR code, which can be found: • on the unit door; • on the…
-
3.3.2. Main functions of the “Komfovent Control” app
After launching the app, you will first see the list of units assigned to you. Here you can add more units, change the app language, delete a unit, or rename it. To access the unit control interface, tap its image in the list. My devices Add a new unit, change the app language, or log out of the…
-
3.4. Internet control
The unit can be controlled via the Internet using a computer on the website control.komfovent.com or a smartphone with the “Komfovent Control” app. Before controlling the unit, you will need to create an account and register. This can be done by visiting the control. komfovent.com website or…
-
The unit ID can be found
• next to the QR code on the unit door; • on the main control board (see “Installation manual”); • on the control panel (see section “3.1.13. About the unit”). You will see all units you have added and those shared with you in the list. To control a unit, simply click on the image of the specific…
-
3.5. Control via a computer without an internet connection
The device can also be controlled from a computer within a local network (without internet) or by connecting to it directly. For information on connecting the unit to an internal network or directly to a computer, see the “Installation Manual”. Enter the device IP address in your web browser (IP…
-
3.5.1. Turning on/off and changing operation modes
Press any ventilation mode button to turn on the device. The unit starts operating and the button of the activated mode changes its colour. To stop the device, press the TURN OFF at the top of the main window: CONTROL OPERATION CONTROL OPERATION MODES ECO AWAY NORMAL INTESIVE BOOST KITCHEN FIREPLACE…
-
3.5.3. Air quantity and temperature settings
You can set air flow of supply and exhaust air, desired temperature and turn off/on an electric heater for each ventilation mode. If turned off, the heater will not turn on even when the desired temperature is not reached. If turned on, the heater will operate only when the heat exchanger alone…
-
3.5.5. Ventilation by a weekly schedule
To activate ventilation by a weekly schedule, press AUTO1 and select a desired operation schedule in the SCHEDULING section. Button of the selected schedule will change its colour. SCHEDULING SCHEDULE OPERATION PROGRAM 4:00 WORKING WEEK STAY AT HOME OFFICE CUSTOM 8:00 12:00 16:00 20:00 24:00 I II…
-
3.5.7. Alarms
In case of any fault messages during operation of the unit, a red exclamation mark will appear near the “Alarms” button. Device operation may be stopped given the severity of a fault message. Press the button ALARMS to read a message. You can also delete current messages or view a recorded history…
-
After changing any settings, press SAVE CHANGES to apply new values
To discard changes, return to the start window by pressing the return button. Button RESTORE SETTINGS restores all settings to the factory defaults. Be careful not to press this button accidentally. The following sections are displayed in the settings window: USER INTERFACE – you can use it to…
-
• Indoor humidity – this setting is required to determine freezing conditions. When “Auto” setting is selected, indoor humidity will be set automatically using an integrated humidity sensor and/or external humidity sensor connected to B8 terminal of the controller (see “Installation Manual”). If the…
-
FILTERS. Here you can set outdoor air quality parameters or perform new filter calibration
• Outdoor air quality. The time it takes for air filters to get dirty depends a lot on the environment in which the building is located. If the ambient air is very polluted, the filters will get dirty much faster and will need to be replaced more often. If the air quality of the environment is good…
-
4.1. Table of messages
Below is a list of messages and recommended actions to resolve faults. These messages are displayed in the C6.1 control panel, mobile app or a computer. F stands for critical alarms, W – for notifications. 1 38 Code Message F1 Low supply air flow 1. Contaminated air filters. 2. Excessive resistance…
-
Code
Message Possible cause User‘s actions F56 Communication error There is no connection with the supply air fan. 1a. Check the fan connection. 1b. Contact authorised service. F59 - F61 Exhaust fan drive failure Extract air fan not working. Contact authorised service. F62 Communication error There is no…
-
4.3. Remote control
If the ventilation unit is connected to the Internet, remote access to it can be provided to service representatives or a maintenance company if necessary. In the “Settings” menu, in the “Remote control” window, you will find the “Remote assistance” function. Remote assistance Permanent maintenance…
-
Task
Frequency Performed by Clean dust inside the unit 6 months User Check the rotor belt for wear and tension (only for DOMEKT R devices) 12 months User Replacement of a worn rotor belt If necessary Service representative Check the rotor wheel brushes for tightness and wear (only for DOMEKT R devices)…
-
In the AHU, air always moves towards the centre of the unit, therefore, filters must be installed with their arrows pointing towards the heat exchanger. Fig. 2. Examples of filter direction in different types of units The pictures below show the location of filters on different models of devices.…
-
Domekt R 150 F
-
Domekt R 250 F
Domekt R 300 V 44 UAB KOMFOVENT we reserve the right to make changes without prior notice DOMEKT_C8_user manual_26-09
-
Domekt R 300 F
Domekt R 350 V UAB KOMFOVENT we reserve the right to make changes without prior notice DOMEKT_C8_user manual_26-09 45
-
Domekt CF 200 F
Domekt CF 200 F E0 For filter replacement on R 200 VSO unit refer to installation manual. 5.2. Device maintenance journal The following table is for recording performed maintenance and repair works. The log is mandatory if the air handling unit is covered by the extended manufacturer’s warranty.…
-
APENDIX NO.1
KOMFOVENT CONTROL TERMS OF USE AND PRIVACY NOTICE 1. Introduction These Terms of Use (“the Terms”) govern the use of the KOMFOVENT CONTROL mobile application, operated by KOMFOVENT, UAB (“KOMFOVENT”), and the use of other related services. KOMFOVENT CONTROL is a mobile application designed to…
-
The processing of this data is necessary for the operation of the KOMFOVENT CONTROL app and provision of remote control services. If you use the KOMFOVENT CONTROL application, the legal basis for the processing of such data is the execution of the agreement on the use of the KOMFOVENT CONTROL mobile…
-
6. Notification and Termination
You may stop using the KOMFOVENT CONTROL app and/or stop periodical collection of your device information specified in point 5.3 Data Categories and Objectives at any time. This can be done in the KOMFOVENT CONTROL application by refusing to accept the Privacy Policy. By refusing to accept the…
-
APENDIX NO.2
WARRANTY INFORMATION Dear Customer, KOMFOVENT thanks you for your choice. We are pleased that you have chosen us and will strive to ensure you are satisfied with your purchased product. To avoid misunderstandings, we kindly ask you to read the installation and operating instructions of the product…
-
WARRANTY CONDITIONS
1. The warranty does not apply in the following cases: 1.1. If the product usage or operating conditions, as specified in the installation and operating instructions, are violated; 1.2. If the storage conditions of the unit are violated; 1.3. If there are signs indicating attempts of unqualified…
-
APENDIX NO.3
WHERE TO FIND SERIAL NUMBER? 1. On the unit casing AIR HANDLING UNIT S/N 123456 AHU-UNIT-MODEL-AND-CONFIGURATION Nominal voltage Nominal frequency Maximum current 230 V AC 50-60 Hz 6.5 A Serial No. 123456 IP54 Date of manufacture 2020.02.02 2. In the control panel Menu Overview Scheduling Settings…
-
SERVICE AND SUPPORT
PARTNERS LITHUANIA UAB KOMFOVENT Phone: +370 5 200 8000 service@komfovent.com www.komfovent.com AT FINLAND Komfovent Oy Muuntotie 1 C1 FI-01 510 Vantaa, Finland Phone: +358 20 730 6190 toimisto@komfovent.com www.komfovent.com CZ GERMANY Komfovent GmbH Konrad-Zuse-Str. 2, 42551 Velbert, Deutschland…
Схемы, таблицы и рисунки — в просмотре документа выше. Клик по номеру страницы открывает её в просмотре.