Инструкция на Контроллеры Klingenburg серии KR4, KR7
Контроллеры Klingenburg серии KR4, KR7. Описание и технические характеристики.
Загружаем документ…
Текст инструкции
-
E N E R G Y R E C O V Page 2 1. Function of the controller Page 4 2. Terminal connections Page 5 3. Technical data Page 6 4. Initial operation Page 7 5. Manual mode / external mode Page 10 6. Trouble-shooting and fault messages Page 14 7. Safety and precautions 1
-
1. Function of the controller
We have only two controllers for all rotor sizes: KR4 = 400 Watt – for wheel diameter ≤ 3760 mm KR7 = 750 Watt – for wheel diameter >3760 mm Special features: the controllers are usable worldwide all known regulations are taken into account by us for construction of the controller it is therefore…
-
24 Volt = on the contacts 5, 7, 9 (and optional 14) 3. Technical data Controller typ 0-10 V 0-20 mA 4-20 mA 2. Terminals at the control units KR 4 / KR7 Output Fuse (internal) Optional: Precedence freq. (for example: antifreeze - summer identification Weight Operating report: in operation: 11 and 13…
-
4. Initial operation of the KR4 / KR7 base controller
-
External mode
-
The following image appears in the display in manual mode
-
e r r o r For operation with run control: For operation without run control: Space from proximity switch to rotor Change the controller programming Connect the proximity switch to the controller (see run control description) V-belt jumps off V-belt over or under tension Even though controller signal…
-
7. Safety and precautions
Before installation and initial operation of the frequency converter, please read through the product handbook carefully and observe all warnings and safety precautions. Make sure that the product manual is easily reachable in the area of the frequency converter. Definition of tips: Warning! Failure…
-
Klingenburg GmbH Boystraße 115 45968 Gladbeck Germany Tel.: +49-20 43-96 36-0 Fax: +49-20 43-7 23 62 E-mail: klingenburg@klingenburg.de www.klingenburg.de DNKR4/7 Status 01.14 E N E R G Y
Схемы, таблицы и рисунки — в просмотре документа выше. Клик по номеру страницы открывает её в просмотре.