Инструкция на Датчик присутствия с подключением к сети питания Frico серии PDK65
Датчик присутствия с подключением к сети питания Frico серии PDK65 для контроля присутствия в небольших помещениях. Инструкция по эксплуатации.
Загружаем документ…
Текст инструкции
-
Presence detector for 230 VAC - PDK65
(kit with power supply) Installation instructions WARNING! The installation of this product requires working with high-voltage and may only be carried out by a qualified electrician. The power must be isolated prior to installation and opening of the product. • This product may only be installed…
-
IR detector
Power supply Up to five detectors can be connected to the power supply and operate simultaneously. External switches can be connected for switching on and off. The detector is a passive infrared detector (passive IR sensor) intended for presence detection. Several IR sensors can be connected to the…
-
S-input
Functional and function diagram The S-input detects four different voltage levels (signal types): Function diagrams apply. Green = input signal or internal signal Red = output signal active. Automatic power on When the jumper on the detector is in "Auto", the detector sends the signal "Detect" (2.7…
-
Technical specifications for Power supply
Voltage: 230 VAC. Frequency: 50/60 Hz. Units power consumption: Nominal: 1 W. Max. 5 W. Load: 10 A at 230 VAC, cos φ = 1. 5 A at 230 VAC, cos φ = 0.5. Error indication: The PWR LED flashes slowly as the output type: Ext.Cont (External contactor) is selected or the sinusoidal curve is not detected…
Схемы, таблицы и рисунки — в просмотре документа выше. Клик по номеру страницы открывает её в просмотре.