Каталог продукции Emerson 2018 - Датчики температуры NTC

Текст каталога

1. Стр. 1 NTC Thermistor

   Temperature Sensors Product Information and Application Notes

2. Стр. 3 10J Series

   The 10J series is a lead-wired temperature measurement sensor with a cost effective plastic shell. Custom designs can be developed if needed to meet complex application requirements. Complete or partial plastic designs can be developed with customized mounting features to fit various applications.…

3. Стр. 4 11J Series

   The 11J series is a lead-wired temperature measurement sensor with a brass/metal shell for use in HVAC systems. Custom designs can be developed if needed to meet complex application requirements. Brass or Stainless Steel designs can be developed with customized mounting features or one of several…

4. Стр. 5 12J Series

   The 12J series is a lead-wired temperature measurement sensor with epoxy-filled plastic shell. Designed for use in refrigeration and other high humidity environments, it can also be used successfully in general purpose applications. UL recognized models available upon request. Specifications •…

5. Стр. 6 13J Series

   The 13J series is a lead-wired temperature measurement sensor for applications where small size and fast response time is required. Its design is focused on the heater requirements and widely used in dry and high temperature environments. UL recognized models available upon request. Specifications •…

6. Стр. 7

   The 15J &16J series are lead-wired temperature measurement sensors available as a fully-molded plastic body or epoxypotted shell design with a Therm-O-Disc H-unit inside. These sensor types are typically designed for the refrigerator market but may be used in other humid environment applications. UL…

7. Стр. 8 36J Series

   36JB Series The 36JB series is a temperature measurement sensor based on the ½” thermostat design. It’s available with bead thermistor inside and comes in several well known designs as well as a fast response version. Designs can be developed with various mounting features including clips to fit…

8. Стр. 9 36J Series

   36JD Series The 36JD series is a temperature measurement sensor based on the ½” thermostat design. It has two fast response thermistors inside and comes in the same housing design as 36JB/JH. By electronically analyzing the differential of both thermistors, this product replaces an NTC and a…

9. Стр. 10

   The 74J and 75J series temperature sensors are developed for major appliances like clothes washers and dishwashers. The 74J is available in an all-plastic design as well as stainless steel versions. Metal or plastic designs can be developed with customized features and connector options to fit…

10. Стр. 11

    These series are developed for air-stream temperature measurement with a plastic or metal shell, customized as needed to interface with application requirements. UL recognized models available upon request. Applications • Laundry – Clothes Dryer – Washer • HVAC Air Duct Sensing Therm-O-Disc 11 NTC…

11. Стр. 12

    76J Series Complete or partial plastic designs typically developed with flange-style mounting features to fit various applications. Specifications • Typical thermal time constant (dependant on wire rating): (measured: 25°C air to 85°C stirred water, 63.2% ∆T) Metal – 1 sec. Plastic – dependent on…

12. Стр. 13 80J Series

    The 80J series is a design solution with plastic cover and box, focused on the measurement of outdoor ambient temperature. Plastic designs can be developed with customized appearance and mounting features. Molded from UV resistant materials. Specifications • Typical operating temperature range -30°C…

13. Стр. 14 93J Series

    The 93J is a precise temperature measurement sensor with an ultra fast response time to be used in numerous applications. Both the immersion style and the flat-tipped version are available in various rugged designs. UL recognized models are available upon request. Specifications Applications •…

14. Стр. 15 95J Series

    The 95J series is a temperature measurement sensor intended to be immersed in direct contact with liquids like water or flue gases. It has a small tip with a fast response and comes in several designs with different molded connector types and thread options. Metal or plastic designs can be developed…

15. Стр. 16 Automotive and RV

    These custom designs can be developed with easy mounting features to fit various applications for sensing air or fluid temperature in engine or interior HVAC applications of automotive and recreational vehicles. Applications • Ambient Air Temp • Intake Air Temp • HVAC Temp • Engine Temp • Battery…

16. Стр. 17 Automotive and RV

    Specifications Ambient Air Temp Sensors All-plastic designs for measuring ambient air temperature • Fast thermal response • Stable performance with high degree of accuracy • Operating temp range -40° to 105°C • Various mounting and interface configurations • Moisture resistant Intake Air Temp…

17. Стр. 18 Technical Data

18. Стр. 19 Product Nomenclature

19. Стр. 20 Important Notice

    The scope of the technical and application information included in this article is necessarily limited. Operating environments and conditions can materially affect the operating results of Therm-ODisc™ products. Users must determine the suitability of any Therm-O-Disc component for their specific…

Схемы, таблицы и рисунки — в просмотре документа выше. Клик по номеру страницы открывает её в просмотре.