Инструкция на Контроллер температуры с суточным программированием серии AUTOMIX 20
Электронный контроллер температуры серии AUTOMIX 20, для радиаторных и напольных систем отопления. Инструкция по монтажу и эксплуатации.
Загружаем документ…
Текст инструкции
-
AUTOMIX 20
MOUNTING AND OPERATING INSTRUCTIONS GENERAL FUNCTIONS AUTOMIX 20 is an advanced electronic temperature control for hydronic radiator and radiant floor heating applications. AUTOMIX 20 is ready for mounting and can easily be integrated in existing heating systems. The main supply and all sensors have…
-
1. Turn the spindle of valve A counter clockwise to the end position (open or closed). Remove the
knob/handle without changing the position of the spindle. 2. Screw the anti-rotation stop B into a convenient hole on the valve (if necessary remove an existing screw). 3. Slide linkage C over the valve spindle. Place motor D into linkage C until the anti-rotation stop B engages into the slot of the…
-
CONNECTIONS OF MOTOR
C A. Adapter B. Supply water sensor A 18 V B T1 C. Room thermostat MAIN WIRE At delivery the main wire is 15 m. The wire must neither be shortened nor lengthened. When necessary a longer main wire must be ordered. Order No. 1885 Main wire 23 m Order No. 1886 Main wire 40 m Order No. 1887 Main wire…
-
Night setback
A. Setback time interval slide switch B. Night setback temperature setting slide switch With slide switch A, one can select either no night setback (0), a 7-hour night setback period (7) or a 9hour setback period (9). The slide switch must be moved from (0) to either (7) or (9) at the time at which…
Схемы, таблицы и рисунки — в просмотре документа выше. Клик по номеру страницы открывает её в просмотре.