Инструкция на Промышленные кондиционеры Sinclair серии SDV4-3P

Текст инструкции

1. Стр. 1 FULL DC INVERTER SYSTEMS

   USER MANUAL OUTDOOR UNITS SDV4-xxxEA3P COMMERCIAL AIR CONDITIONERS SDV4

2. Стр. 2 Original instructions

   IMPORTANT NOTE: Read this manual carefully before installing or operating your new air conditioning unit. Make sure to save this manual for future reference.

3. Стр. 4 After a long use, check the unit stand and fitting for

   damage. If damaged, the unit may fall and result in injury. Table.2-1 To avoid oxygen deficiency, ventilate the room sufficiently if equipment with burner is used together with the air conditioner. Arrange the drain hose to ensure smooth drainage. Incomplete drainage may cause wetting of the…

4. Стр. 5 Table.3-1

   Temperature Mode Outdoor temperature Indoor temperature Room relative humidity Cooling mode -5°C ~ 48°C 17°C ~ 32°C below 80% Heating mode -20°C ~ 24°C ≤27°C Mixed mode Cooling mode 17°C ~ 32°C -5°C ~ 24°C Heating mode ≤27°C NOTE Please switch off the power when protection device starts. Do not…

5. Стр. 6 Please read the following illustration(before apply for servicing)

   Table.4-1 Troubles Causes Outdoor unit White mist or water FAN function stop automatically to defrost. It is the start and stop sound of the solenoid valve The sound of “hiss” At the beginning and the end of the running process, sounds like water flow in valve occurs, which will be amplified in 3~15…

6. Стр. 7

   MALFUNCTION Malfunction display of outdoor unit’s DSP1 and DSP2 Table.5-1 1R Error code E0 Outdoor unit communication error E1 Phase error E2 Communication error with indoor unit E4 Outdoor temp. sensor error E5 Voltage protecation E7 Discharge sensor error E8 Outdoor unit address error xE9 Drive…

7. Стр. 8 6. CONSTRAINT COOLING AND QUERY

   MAIN BOARD (OUTDOOR UNIT) Constraint Cooling Once pressing the constraint cooling button(see the chart on the right), all the indoor unit will be on forced cooling mode and the wind speed is HIGH. Query button Constraint cooling button &+(&. &22/ Fig.6-1 SW2 Qu er y Instru ction s Table.6-1 No.…

8. Стр. 9 The display contents as followings

   Normal display: When standby, the high position displays the address of the outdoor unit,and the low position displays the Qty. of indoor units that can communicate with outdoor unit.When it is operating,it will display the rotation frequency of the compressor. Operation mode: 0-Off; 2-Cooling…

9. Стр. 10 NOTE CONCERNING PROTECTION OF

   ENVIRONMENT This product must not be disposed of via normal household waste after its service life, but must be taken to a collection station for the recycling of electrical and electronic devices. The symbol on the product, the operating instructions or the packaging indicate such disposal…

Схемы, таблицы и рисунки — в просмотре документа выше. Клик по номеру страницы открывает её в просмотре.