Инструкция на Программируемые контроллеры Emerson серии Dixell iProGENIUS бренда Emerson

IMPORTANT RECOMMENDATIONS  The symbol alerts the user of non-insulated “dangerous voltage” within the product area that is sufficiently high to constitute a risk of electric shock to persons.  symbol alerts the user of important operating and maintenance (assistance) instructions The found in the…

o

o o  Separate the power of the device from the rest of the electrical devices connected inside the electrical panel. The secondary of the transformer must never be connected to the earth.  1.1 Prevent the device from being dropped, knocked or shaken as either can cause irreparable damage. Do not…

INTRODUCTION The iPRO is the range of programmable controllers manufactured by Dixell. The range consists of programmable controllers, I/O expansions, drivers for electronic valves and graphical interfaces adapted to cover any type of application in the air-conditioning sector, cooling sector and…

• • • Connection to the dedicated remote LCD display. CANBus. RS485 Master. RS485 Slave. The remote LCD display has the following features: • 240x96 pixel LCD graphic display. • 32-bit processor. • Multilingual in ASCII or UNICODE version. • 8 fully programmable keys. • Panel or wall mounted. The…

VERSIONS OF THE PROGRAMMABLE CONTROLLERS 10 DIN versions: • IPRO.GENIUS o IPG115D (15 relays, no application, disconnectable connectors + molex connectors) o IPG115D SSR (15 relays, no application, disconnectable connectors + molex connectors) o IPG215D (15 relays, no application, spring connectors…

IPRO.GENIUS AND IPRO.CHILL (IPG100D – IPC100D RANGES) 1592025700 IPROFAMILY 3.5 stp GB 2016.12.07 iPro Series 10/96

Description of the connections Connector Description Connector for 24Vac/dc power supply Analogue inputs (Pb1 - Pb10, PbC) Additional power (+5Vdc, +12Vdc, GND) Analogue outputs (Out1 - Out6, TF1 - T2) Additional power (+12Vdc, GND) Potential free opto-insulated digital inputs (DI1 - DI20, DIC) USB…

Description of the inputs and outputs Input No. Type of Input 1 Supply Reference “-“/GND power (24Vac or 24Vdc) 2 Pb1 Configurable analogue input 1 (NTC, PTC, 0 - 20mA, 4 - 20mA, 0 - 10V, 0 - 1V, 0 - 5V, DI) 3 Pb2 Configurable analogue input 2 (NTC, PTC, 0 - 20mA, 4 - 20mA, 0 - 10V, 0 - 1V, 0 - 5V…

DI20 Opto-insulated digital input 20 (potential free contact) 61 DIC Common digital inputs 1 to 20 70 RL1 Relay 1 normally open contact 71 RL2 Relay 2 normally open contact 72 RL3 Relay 3 normally open contact 73 C Common relays 1, 2, 3 and 4 (MAX 6A) 74 RL4 Relay 4 normally open contact 75 RL3…

RL15 Relay 15 normally open contact 92 RL15 Common relays 15 93 RL13 Relay 13 normally open contact 4.1.3 Technical specifications 4.1.3.1 Analogue inputs Analogue conversion type: Number of inputs: Type of analogue input: (configurable via software parameter) Digital input status variation…

Standard Digital outputs Type: Number of outputs: Type of output: (configurable via software parameter) Maximum load: Notes: 4.1.3.5 SSR Digital outputs version Type: Number of outputs: Type of output: (configurable via software parameter) Maximum load: Notes: 4.1.3.6 Relays with NO or NC contacts…

Mechanical specifications 10 DIN module 4.1.3.8 Electrical specifications Power Supply: Consumption: Connectors: Microprocessor: Permanent FLASH memory: RAM: Internal clock: 4.1.3.9 24Vac +10/-15%, 50/60Hz 20 - 36Vdc 20VA (Vac), 15W (Vdc) Molex connectors with low voltage wiring SELECOM/CIVILUX…

4.1.3.10 Product certifications

Control to classify with the definitions 2.5.1 e 2.5.2 mentioned in the section 2.5 of the general requirements EN60730-1 (2.5.1 = integrated control, 2.5.2 = incorporated control). Electrical safety: • EN60730-1 Electromagnetic compatibility: • EN61000-4-2, EN61000-4-3, EN61000-4-11 1592025700…

IPRO.GENIUS (IPG200D RANGE) 4.2.1 Description of the connections Connector Description Connector for 24Vac/dc power supply Analogue inputs (Pb1 - Pb10, PbC) Additional power (+5Vdc, +12Vdc, GND) Opto-insulated analogue outputs (Out1 - Out6, GND) 24Vac/dc power supply for the opto-insulated analogue…

Digital relay outputs (for digital outputs with live contacts)

3 NO relays, 1 common and 2 potential free (Neutral) Digital relay outputs (for digital outputs with potential free contacts) 5 NO relays, 1 common Digital relay outputs (for digital outputs with live contacts) 5 NO relays, 1 common and 2 potential free (Neutral) Digital relay outputs 2 NO relays, 1…

Out5 Analogue output 5 0 - 10V, 4 - 20mA, Opto-insulated relay 27 Out6 Analogue output 6 0 - 10V, 4 - 20mA, Opto-insulated relay 28 Supply Power for opto-insulated analogue outputs at 24Vac or 24Vdc(-) 29 Supply Power for opto-insulated analogue outputs at 24Vac or 24Vdc(+) 30 GND(-) Common…

C Potential free contact (MAX 6A) 94 RS485 Master RS485 Master connection (-) 95 RS485 Master RS485 Master connection (+) 96 RS485 Master RS485 Master connection (insulated gnd) 97 RS485 Slave RS485 Slave connection (-) 98 RS485 Slave RS485 Slave connection (+) 99 RS485 Slave RS485 Slave connection…

Accuracy

Resolution: Notes: 4.2.3.4 Digital outputs Type: Number of outputs: Type of output: (configurable via software parameter) Maximum load: Notes: 4.2.3.5 Out1 - Out4: ±2% full scale Out5 – Out6: ±2% full scale 8bit The electrical devices controlled by these analogue outputs must be powered separately…

Mechanical specifications 10 DIN module 4.2.3.7 Electrical specifications Power Supply: Consumption: Connectors: Microprocessor: Permanent FLASH memory: RAM: Internal clock: 4.2.3.8 Plastic container Mount: Material: Self-extinguishing: Comparative Tracking Index (CTI): Colour: 4.2.3.9 24Vac…

IPRO.GENIUS AND IPRO.CHILL (IPG300D – IPC300D RANGES) 1592025700 IPROFAMILY 3.5 stp GB 2016.12.07 iPro Series 24/96

Description of the connections Connector Description Connector for 24Vac/dc power supply Analogue inputs (Pb1 - Pb10, PbC) Additional power (+5Vdc, +12Vdc, GND) Optoinsulated analogue outputs (Out1 - Out6) PWM (TF1 - T2) Additional power (+12Vdc for TF reference, GND for Out reference) Potential…

Description of the inputs and outputs Input No. Type of Input 1 Supply Reference “-“/GND power (24Vac or 24Vdc) 2 Pb1 Configurable analogue input 1 (NTC, PTC, 0 - 20mA, 4 - 20mA, 0 - 10V, 0 - 1V, 0 - 5V, DI) 3 Pb2 Configurable analogue input 2 (NTC, PTC, 0 - 20mA, 4 - 20mA, 0 - 10V, 0 - 1V, 0 - 5V…

DI19 Opto-insulated digital input 19 60 DI20 Opto-insulated digital input 20 61 IDC Common opto-insulated digital inputs 1 to 20 (if potential free inputs) 70 RL1 Relay 1 normally open contact 71 RL2 Relay 2 normally open contact 72 RL3 Relay 3 normally open contact 73 C Common relays 1, 2, 3 and 4…

Technical specifications 4.3.3.1 Analogue inputs Analogue conversion type: Number of inputs: Type of analogue input: (configurable via software parameter) Digital input status variation detection time: Accuracy: Additional power: Notes: 4.3.3.2 Digital inputs Type: (configurable via software…

Standard Digital outputs Type: Number of outputs: Type of output: (configurable via software parameter) Maximum load: Notes: 4.3.3.5 Relays with NO contacts 15 Relays with normally open contact: - RL1, RL2, RL3, RL4, RL5, RL6, RL7, RL8, RL9, RL10, RL11, RL12, RL13, RL14, RL15 Optional SSR relays may…

Mechanical specifications 10 DIN module 4.3.3.7 Electrical specifications Power Supply: Consumption: Connectors: Microprocessor: Permanent FLASH memory: RAM: Internal clock: 4.3.3.8 Plastic container Mount: Material: Self-extinguishing: Comparative Tracking Index (CTI): Colour: 4.3.3.9 24Vac…

IPRO.GENIUS (IPG800D RANGES) 4.4.1 Description of the connections Connector Description Connector for 24Vac/dc power supply (Black color) Green LED to indicate the presence of power supply Connector for the Analog Outputs; depend on the model it can be: - without PWM:all the three analog output can…

Analog Input connector

PB1, PB2, PB3, PB4, PB5 = NTC, PTC, DI or PT1000 Analog Input connector. PB6, PB7 = NTC, PTC, 0..20mA, 4..20mA, 0..10V, 0..1V, 0..5V, DI, PT1000 Connector for Unipolar Valve Connector for Relay 1 - 16A changeover Connector for Relay 2, 3, 4, 5 - Relay 2 = 8A or 1A/240V SSR (NO) - Relay 3 = 8A or…

AO 3 Analogue output 3 0-10Vdc, 4-20mA 35 Com Analogue output 2-3 common/GND 36 AO 2 Analogue output 2 0-10Vdc, 4-20mA 37 Com Analogue output 1 common/GND (if PWM = VNR) 38 AO 1 Analogue output 1 0-10Vdc, 4-20mA, PWM (if PWM=OUT and 24Vac Power supply) 39 +12V Additional power +12Vdc (output) 40 +5V…

Digital inputs Type: Not Opto-insulated free voltage contacts (configurable via software parameter) On request (different Part Number) it is possible to have the OptoInsulated digital input but with power supply 24Vac (in this case no potential free contacts). Number of inputs: Digital input status…

Wiring diagrams 4.4.3.6 Mechanical specifications 10 DIN module 4.4.3.7 Electrical specifications Power Supply: Consumption: Connectors: Microprocessor: Permanent FLASH memory: RAM: Internal clock: 1592025700 IPROFAMILY 3.5 stp GB 2016.12.07 24Vac +10/-15%, 50/60Hz 20 - 36Vdc 20VA (Vac), 15W (Vdc)…

Plastic container Mount: Material: Self-extinguishing: Comparative Tracking Index (CTI): Colour: 4.4.3.9 On a DIN rail (EN 50022, DIN 43880) Fastened with screws via the removable plastic flaps. PC-ABS Thermoplastic V0 (UL94) 300V Black Product certifications Control to classify with the definitions…

IPRO 4 DIN (IPG100D – IPG200D – IPC100E RANGES) 1592025700 IPROFAMILY 3.5 stp GB 2016.12.07 iPro Series 37/96

Description of the connections Connector Description Connector for 24Vac/dc power supply Analogue inputs (Pb1 - Pb6, PbC) Additional power (+5Vdc, +12Vdc, GND) Analogue outputs (Out1 - Out4, GND) 24Vac/dc digital inputs (DI1 - DI11, GND) Connector for remote terminal (VISOGRAPH), maximum 1 terminal…

DI11 Digital input 11 24Vac/dc 31 GND(-) Reference “-“ for digital inputs from1 to 11 (if version with dry contacts, this input has to be used only as common for the digital inputs) 40 C Common relays 1, 2, 3 and 4 (MAX 10A) 41 C Common relays 1, 2, 3 and 4 (MAX 10A) 42 RL1 Relay 1 normally open…

Analogue outputs Type: Number of outputs: Type of analogue output: (configurable via software parameter) Maximum load: Accuracy: Resolution: Notes: 4.5.3.4 4 configurable outputs 0-10Vdc 4-20mA (Out1 - Out4) 40mA (Out1 - Out4) max with configured outputs 0-10Vdc 400Ω max with configured outputs…

Mechanical specifications 4 DIN module 4.5.3.7 Electrical specifications Power Supply: Consumption: Connectors: Microprocessor: Permanent FLASH memory: RAM: Internal clock: 4.5.3.8 Plastic container Mount: Material: Self-extinguishing: Comparative Tracking Index (CTI): Colour: 4.5.3.9 24Vac…

IPRO.LINK (IPL500D) 4.6.1 Description of the connections Connector Description Connector for 24Vac/dc power supply Connector for remote terminal (VISOGRAPH), maximum 1 terminal per iPRO. RS485 Slave connector Serial port connector (LAN or RS485) CANBUS connector (for expansion and driver for…

Description of the inputs and outputs Input No. Type of Input 1 Supply Reference “-“/GND power (24Vac or 24Vdc) 2 Supply Reference “+“ power supply (24Vac or 24Vdc) 3 Remote Display Connection for VISOGRAPH remote terminal (Vnr) 4 Remote Display Connection for VISOGRAPH remote terminal (+) 5 Remote…

Mechanical specifications 4 DIN module 4.6.3.3 Electrical specifications Power Supply: Consumption: Connectors: Microprocessor: Permanent FLASH memory: RAM: Internal clock: 4.6.3.4 24Vac +10/-15%, 50/60Hz 20 - 36Vdc from 20VA (Vac), from 15W (Vdc) STELVIO 90° screw connectors for digital outputs…

IPX106D 4.7.1 Description of the connections Connector Description Connector for 24Vac/dc power supply Analogue inputs (Pb1 - Pb5, PbC) Potential free digital inputs (DI1 - DI3, DIC) Additional power (+5Vdc, +12Vdc, GND) Analogue outputs (Out1..Out3, GND) Analogue inputs (Pb6 - Pb7, PbC) Additional…

Description of the inputs and outputs Input No. Type of Input 1 Supply 2 Pb1 3 Pb2 4 Pb3 5 Pb4 6 Pb5 7 +12V Additional power +12Vdc 8 +12V Additional power +12Vdc Reference “+“ power supply (24Vac or 24Vdc) Description Reference “-“/GND power (24Vac or 24Vdc) Configurable analogue input 1 (NTC, PTC…

Technical specifications 4.7.3.1 Analogue inputs Analogue conversion type: Number of inputs: Type of analogue input: (configurable via software parameter) Digital input status variation detection time: Accuracy: Additional power: Notes: 4.7.3.2 Digital inputs Type: (configurable via software…

Wiring diagrams 4.7.3.6 Mechanical specifications 4 DIN module 4.7.3.7 Electrical specifications Power Supply: Consumption: Connectors: 1592025700 IPROFAMILY 3.5 stp GB 2016.12.07 24Vac +10/-15%, 50/60Hz 20 - 36Vdc 10VA (Vac), 10W (Vdc) Molex connectors with low voltage wiring SELECOM/CIVILUX…

Plastic container Mount: Material: Self-extinguishing: Comparative Tracking Index (CTI): Colour: 4.7.3.9 On a DIN rail (EN 50022, DIN 43880) Fastened with screws via the removable plastic flaps. PC-ABS Thermoplastic V0 (UL94) 300V Black Setting the address of the device The address of the device is…

IPX206D – IPX306D 4.8.1 Description of the connections Connector Description Connector for 24Vac/dc power supply Analogue inputs (Pb1 - Pb5, PbC) Potential free digital inputs (DI1 - DI3, DIC) or Power supply digital inputs (DI1 – DI3, ID) Additional power (+5Vdc, +12Vdc, GND) Analogue outputs…

Description of the inputs and outputs Input Type of Input Description 1 Supply 2 Pb1 3 Pb2 4 Pb3 5 Pb4 6 Pb5 7 +12V Additional power +12Vdc 8 ID Common for digital inputs from 1 to 3 when power supply (24Vac/dc) 9 Supply 10 DI1 Digital input 1 (potential free contact (13) or power supply (8)) 11 DI2…

Technical specifications 4.8.3.1 Analogue inputs Analogue conversion type: Number of inputs: Type of analogue input: (configurable via software parameter) Digital input status variation detection time: Accuracy: Additional power: Notes: 4.8.3.2 Digital inputs Type: (configurable via software…

Notes

4.8.3.5 Wiring diagrams 4.8.3.6 Mechanical specifications Verify the capacity of the output used. There is double insulation between the digital outputs and the low voltage of the rest of the circuit. The common relays of the outputs are separate and split into groups. 4 DIN module 1592025700…

Electrical specifications Power Supply: Consumption: Connectors: 4.8.3.8 Plastic container Mount: Material: Self-extinguishing: Comparative Tracking Index (CTI): Colour: 4.8.3.9 24Vac +10/-15%, 50/60Hz 20 - 36Vdc 10VA (Vac), 10W (Vdc) Molex connectors with low voltage wiring (for IPX306D) Phoenix…

IPX115D – IPX125D 4.9.1 Description of the connections Connector Description Connector for 24Vac/dc power supply Analogue inputs (Pb1 - Pb10, PbC) Additional power (+5Vdc, +12Vdc, GND) Opto-insulated analogue outputs (Out1 - Out6, GND) 24Vac/dc power supply for the opto-insulated analogue output…

Digital outputs with SSR relays (IPX125D)

4 NO relays, 2 common Digital relay outputs (IPX125D) 6 NO relays, 2 common Green power LEDs (PWR ON) and red alarm signal LED (ALARM) See relative paragraph 4.9.2 Description of the inputs and outputs Input No. Type of Input 1 Supply 2 Pb1 3 Pb2 4 Pb3 5 Pb4 6 Pb5 7 PbC Common analogue inputs (NTC…

DI9 Opto-insulated digital input 9 49 DI10 Opto-insulated digital input 10 50 GND(-) Reference “-“ for opto-insulated digital inputs 1 to 20 (if inputs 24Vac or 24Vdc) 51 DI11 Opto-insulated digital input 11 52 DI12 Opto-insulated digital input 12 53 DI13 Opto-insulated digital input 13 54 DI14…

RL21 Relay 21 normally open contact 128 C 129 RL22 Relay 22 normally open contact 130 RL23 Relay 23 normally open contact 131 RL24 Relay 24 normally open contact 132 C 133 RL25 4.9.3 Common relays 20, 21, 22, 23, 24 and 25 (MAX 6A) Common relays 20, 21, 22, 23, 24 and 25 (MAX 6A) Relay 25 normally…

Digital outputs Type: Number of outputs: Type of output: (configurable via software parameter) Maximum load: Notes: 4.9.3.5 Relays with NO, NC and SSR contacts 25 Relays with normally open contact: - RL1, RL2, RL4, RL5, RL6, RL7, RL8, RL9, RL10, RL12, RL13, RL15, RL20, RL21, RL22, RL23, RL24, RL25…

Mechanical specifications 10 DIN module 4.9.3.7 Electrical specifications Power Supply: Consumption: Connectors: 4.9.3.8 Plastic container Mount: Material: Self-extinguishing: Comparative Tracking Index (CTI): Colour: 4.9.3.9 24Vac +10/-15%, 50/60Hz 20 - 36Vdc 20VA (Vac), 15W (Vdc) Molex connectors…

4.10.1 Description of the connections Connector Description Connector for 24Vac/dc power supply Analogue inputs (Pb1 - Pb10, PbC) Additional power (+5Vdc, +12Vdc, GND) Opto-insulated analogue outputs (Out1 - Out6, GND) 24Vac/dc power supply for the opto-insulated analogue output Potential free…

Digital relay outputs

4 NO relays, 1 common Digital relay outputs 2 NO relays, 1 common Green power LEDs (PWR ON) and red alarm signal LED (ALARM) See relative paragraph 4.10.2 Description of the inputs and outputs Input No. Type of Input 1 Supply 2 Pb1 3 Pb2 4 Pb3 5 Pb4 6 Pb5 7 PbC Common analogue inputs (NTC, PTC…

DI10 Opto-insulated digital input 10 50 GND(-) Reference “-“ for opto-insulated digital inputs 1 to 20 (if inputs 24Vac or 24Vdc) 51 DI11 Opto-insulated digital input 11 52 DI12 Opto-insulated digital input 12 53 DI13 Opto-insulated digital input 13 54 DI14 Opto-insulated digital input 14 55 DI15…

RL18 SSR relay 18 normally open contact 118 RL19 SSR relay 19 normally open contact 119 P 120 RL24 121 P 122 RL25 Common SSR relays 16, 17, 18 and 19 Relay 24 normally open contact Common relays 24 and 25 (MAX 6A) Relay 25 normally open contact 4.10.3 Technical specifications 4.10.3.1 Analogue…

4.10.3.4 Digital outputs

Type: Number of outputs: Type of output: (configurable via software parameter) Maximum load: Notes: Relays with NO, NC and SSR contacts 25 Relays with normally open contact: - RL1, RL2, RL3, RL4, RL5, RL6, RL7, RL8, RL9, RL10, RL11, RL12, RL13, RL14, RL15, RL20, RL21, RL22, RL23, RL24, RL25 SSR…

4.10.3.6 Mechanical specifications

10 DIN module 4.10.3.7 Electrical specifications Power Supply: Consumption: Connectors: 24Vac +10/-15%, 50/60Hz 20 - 36Vdc 20VA (Vac), 15W (Vdc) Phoenix quick coupling connectors for low voltage STELVIO 90° screw connectors for digital outputs (250Vac, 6A max) 4.10.3.8 Plastic container Mount…

4.11 IPX315D

4.11.1 Description of the connections Connector Description Connector for 24Vac/dc power supply Analogue inputs (Pb1 - Pb10, PbC) Additional power (+5Vdc, +12Vdc, GND) Opto-insulated analogue outputs (Out1 - Out6, GND) 24Vac/dc power supply for the opto-insulated analogue output Potential free…

4.11.2 Description of the inputs and outputs

Input No. Type of Input 1 Supply 2 Pb1 3 Pb2 4 Pb3 5 Pb4 6 Pb5 7 PbC Common analogue inputs (NTC, PTC, PT1000, DI) 8 GND(-) Additional power reference 5Vdc and 12Vdc and analogue inputs (0 - 20mA, 4 - 20mA, 0 10V, 0 - 1V, 0 - 5V) 9 Supply Reference “+“ power supply (24Vac or 24Vdc) 10 Pb6 11 Pb7 12…

DI17 Opto-insulated digital input 17 58 DI18 Opto-insulated digital input 18 59 DI19 Opto-insulated digital input 19 60 DI20 Opto-insulated digital input 20 61 IDC Common opto-insulated digital inputs 1 to 20 (if potential free inputs) 70 RL1 Relay 1 normally open contact 71 RL2 Relay 2 normally…

4.11.3 Technical specifications

4.11.3.1 Analogue inputs Analogue conversion type: Number of inputs: Type of analogue input: (configurable via software parameter) Digital input status variation detection time: Accuracy: Additional power: Notes: 10-bit A/D converter 10 NTC Dixell (-50T110°C; 10KΩ±1% at 25°C) PTC Dixell(-55T115°C…

4.11.3.4 Digital outputs

Type: Number of outputs: Type of output: (configurable via software parameter) Maximum load: Notes: Relays with NO, NC and SSR contacts 25 Relays with normally open contact: - RL1, RL2, RL4, RL5, RL6, RL7, RL8, RL9, RL10, RL12, RL13, RL15, RL20, RL21, RL22, RL23, RL24, RL25 Relays with changeover…

4.11.3.6 Mechanical specifications

10 DIN module 4.11.3.7 Electrical specifications Power Supply: Consumption: Connectors: 24Vac +10/-15%, 50/60Hz 20 - 36Vdc 20VA (Vac), 15W (Vdc) Molex connectors with low voltage wiring SELECOM/CIVILUX connectors for digital outputs (250Vac, 6A max) 4.11.3.8 Plastic container Mount: Material…

INTERFACE 5.1 VISOGRAPH The iPRO programmable controllers (10 DIN and 4 DIN) allow a programmable remote LCD display (VISOGRAPH) to be connected. Through the VISOPROG processing environment, the display and buttons can be programmed as the user wishes. Text, icons and animated icons can be added to…

Connections The connection between the controller and the VISOGRAPH must be implemented using a BELDEN 8772 cable (3xAWG20). Up to 2 remote displays can be connected for each controller of the IPG, IPC and IPD ranges. 1 remote display can be connected for the controllers of the 4 DIN range. The…

Dimensions 1592025700 IPROFAMILY 3.5 stp GB 2016.12.07 iPro Series 75/96

MEANING OF THE LEDS AND JUMPERS IN THE VARIOUS DEVICES 6.1 PROGRAMMABLE CONTROLLERS LEDs are present in the programmable controllers in order to indicate the status of the device. PWR ON PWR ON (green): - if on, the device is powered LED1 (yellow): - if on, the system is being updated. - if it…

INSTALLATION The devices must not be installed in environments where the following situations are present:  Temperature and humidity outside the range stipulated in the data plate. Frequent and sudden changes in temperature and/or humidity  Direct sunlight and weathering in general  High…

CONNECTION OF THE ANALOGUE INPUTS The analogue inputs in the programmable controllers and expansions are fully configurable. NTC or PTC, 0 20mA, 4 - 20mA, 0 - 10V, 0 - 1V or 0 - 5V type of sensors can be used. The analogue inputs can also be used as digital inputs (potential free - not live). NOTE…

Pressure transducers and current probes (0 - 20mA, 4 - 20mA) 2-row sensors that require +12Vdc power supply. Each sensor must be connected through one of the inputs (from Pb1 to Pb10) and the power supply (+12V) as shown in the diagram below. IPG-IPC IPG-IPC 4 DIN Recommendations: - follow the…

Pressure transducers and ratiometric pressure transducers (0 - 5V) 3-row sensors that require +5Vdc power supply. Each sensor must be connected through one of the inputs (from Pb1 to Pb10) and the power supply (+5V/GND) as shown in the diagram below. IPG-IPC IPG-IPC 4 DIN Recommendations: - follow…

Live probes (0 - 1V, 0 - 5V, 0 - 10V) 3-row sensors that require +12Vdc power supply. Each sensor must be connected through one of the inputs (from Pb1 to Pb10) and the power supply (+12V/GND) as shown in the diagram below. IPG-IPC IPG-IPC 4 DIN Recommendations: - follow the diagram of the device…

Probes and transducers with 24Vac/dc power supply 3 or 4-row sensors that require +24Vac/dc power supply Each sensor must be connected through one of the inputs (from Pb1 to Pb10), whereas the power supply as shown in the diagram below. This is an example for versions IPG-IPC. For all the others…

7.3.10 Probes and transducers with 24Vac/dc power supply IPG800 Series

3 or 4-row sensors that require +24Vac/dc power supply Each sensor must be connected through one of the inputs (from Pb6 to Pb7), whereas the power supply as shown in the diagram below. Recommendations: - respect the “+” and “-“ polarities of the power supply. - the power supply of the sensor must…

CONNECTION OF THE DIGITAL INPUTS The digital inputs in the programmable controllers and expansions are fully configurable. Depending on the model used, the digital inputs can be used as potential free or live (24Vac/dc) digital inputs. 7.4.1 Potential-free digital inputs IPG100, IPC100 and IPX106D…

Potential-free digital inputs IPG800 Series Recommendations: - follow the diagram of the device used, for the numbering. - the configuration is determined by the application. 7.4.3 Live digital inputs (24Vac/dc) IPG200D, IPX115D, IPX125D, IPX215D, IPX225D VERSIONS IPG108D, IPG208D, IPG108E, IPG208E…

Power supply 24Vac digital inputs IPG800 Series On request (different Part Number) it is possible to have the Opto-Insulated digital input but with power supply 24Vac (in this case no potential free contacts). Recommendations: - follow the diagram of the device used, for the numbering. - the…

CONNECTION OF THE ANALOGUE OUTPUTS Depending on the model and configurations, it is possible to use analogue outputs such as 0 - 10Vdc, 4 20mA or PWM (the PWM configuration requires the Dixell XVxx module to be used for the fan speed to be controlled). NOTE: the analogue outputs in certain models…

0-10Vdc, 4-20mA Analogue output for fan speed control IPG800 Series The three analog outputs AO1, AO2 and AO3 can be used to drive an external fan speed control (Dixell XV series) through the 0-10Vdc or 4-20mA. Recommendations: - follow the diagram of the device used, for the numbering. - the…

PWM analogue output for control IPG800 Series The analog outputs AO1 (depend on the model), can be used to drive an external fan speed control (Dixell XV series) through the PWM signal. Note: the PWM is available only if the Power Supply is 24Vac. Recommendations: - follow the diagram of the device…

Devices with 24Vac/dc power supply 3 or 4-row devices that require +24Vac/dc power supply Each device must be connected through one of the outputs (from Out1 to Out6), whereas the power supply as shown in the diagram below. This is an example for versions IPG-IPC. For all the others version, verify…

Analogue output for relays (coil power supply 12Vdc) IPG-IPC IPG 4 DIN Recommendations: - follow the diagram of the device used, for the numbering. - the configuration is determined by the application. 7.6 CONNECTION OF THE DIGITAL OUTPUTS Depending on the model, the digital outputs can have…

ELECTRICAL CONNECTIONS The IPG800 driver can manage the following electronic expansion valves: Connection numbering SER Sporland SAGINOMIYA EX3 Emerson V4 VALVE V2 VALVE V3 VALVE V1 VALVE +12V VALVE (Common) ORANGE RED YELLOW BLACK ORANGE RED YELLOW BLACK WHITE BROWN BLACK BLUE EXM/EXL Emerson WHITE…

CANBUS CONNECTION Recommendations: - follow the diagram of the device used, for the numbering. 1592025700 IPROFAMILY 3.5 stp GB 2016.12.07 iPro Series 93/96

RS485 SLAVE CONNECTIONS Recommendations: - follow the diagram of the device used, for the numbering. 1592025700 IPROFAMILY 3.5 stp GB 2016.12.07 iPro Series 94/96

7.10 RS485 MASTER CONNECTION

Recommendations: - follow the diagram of the device used, for the numbering. 1592025700 IPROFAMILY 3.5 stp GB 2016.12.07 iPro Series 95/96

Инструкция на Программируемые контроллеры Emerson серии Dixell iProGENIUS

Текст инструкции

Новое в каталогах

Новое в инструкциях