Инструкция на Настенные сплит-системы Carrier серии 42QHA-N
Настенные сплит-системы Carrier 42QHA007N / 38QHA007N, 42QHA009N / 38QHA009N, 42QHA012N / 38QHA012N, 42QHA018N / 38QHA018N. 42QHA024N / 38QHA024N. Инструкция по эксплуатации.
Загружаем документ…
Текст инструкции
-
SPLIT-TYPE ROOM AIR CONDITIONER
Owner’s Manual CS78421-548-754 IMPORTANT NOTE: Read this manual carefully before installing or operating your new air conditioning unit. Make sure to save this manual for future reference.
-
Table of Contents
Owner’s Manual 0 Safety Precautions 04 1 Unit Specifications and Features 06 SAFETY FIRST 2 Manual Operation (Without Remote) 11
-
3 Care and Maintenance.....................................................12
4 Troubleshooting 14 5 European Disposal Guidelines 18
-
Safety
Precautions Safety Precautions Read Safety Precautions Before Installation Incorrect installation due to ignoring instructions can cause serious damage or injury. The seriousness of potential damage or injuries is classified as either a WARNING or CAUTION. This symbol indicates that ignoring…
-
Safety
Precautions ELECTRICAL WARNINGS • Only use the specified power cord. If the power cord is damaged, it must be replaced by the manufacturer or certified service agent. • Keep power plug clean. Remove any dust or grime that accumulates on or around the plug. Dirty plugs can cause fire or electric…
-
Unit Parts
Front Panel Power Cable (Some Units) Remote Control Louver Display window(A) Remote Holder (Some Units) Display window(B) fresh defrost run timer fresh defrost run timer “fresh” when Fresh feature is activated(some units) “defrost” when defrost feature is activated. “run ” when the unit is on.…
-
Achieving Optimal Performance
Unit Specifications and Features Optimal performance for the COOL, HEAT, and DRY modes can be achieved in the following temperature ranges. When your air conditioner is used outside of these ranges, certain safety protection features will activate and cause the unit to perform less than optimally.…
-
For a detailed explanation of each function,
refer to the Remote Control Manual. • Auto-Restart If the unit loses power, it will automatically restart with the prior settings once power has been restored. • Anti-mildew (some units) When turning off the unit from COOL, AUTO (COOL), or DRY modes, the air conditioner will continue operate at very…
-
Specifications
and Features • Setting Angle of Air Flow Setting vertical angle of air flow While the unit is on, use the SWING/DIRECT button to set the direction (vertical angle) of airflow. 1. Press the SWING/DIRECT button once to activate the louver. Each time you press the button, it will adjust the louver by…
-
Specifications
and Features • Sleep Operation The SLEEP function is used to decrease energy use while you sleep (and don’t need the same temperature settings to stay comfortable). This function can only be activated via remote control. Press the SLEEP button when you are ready to go to sleep. When in COOL mode…
-
Manual Operation (Without Remote)
How to operate your unit without the remote control Manual Operation (Without Remote) In the event that your remote control fails to work, your unit can be operated manually with the MANUAL CONTROL button located on the indoor unit. Note that manual operation is not a long-term solution, and that…
-
Care and Maintenance Cleaning Your Indoor Unit 6. Rinse the filter with fresh water, then shake BEFORE CLEANING OR MAINTENANCE 7. Dry it in a cool, dry place, and refrain from ALWAYS TURN OFF YOUR AIR CONDITIONER SYSTEM AND DISCONNECT ITS POWER SUPPLY BEFORE CLEANING OR MAINTENANCE. CAUTION off…
-
CAUTION
• Before changing the filter or cleaning, turn off the unit and disconnect its power supply. • When removing filter, do not touch metal parts in the unit. The sharp metal edges can cut you. • Do not use water to clean the inside of the indoor unit. This can destroy insulation and cause electrical…
-
Troubleshooting
4 SAFETY PRECAUTIONS If ANY of the following conditions occurs, turn off your unit immediately! • The power cord is damaged or abnormally warm • You smell a burning odor • The unit emits loud or abnormal sounds • A power fuse blows or the circuit breaker frequently trips • Water or other objects…
-
Issue
Possible Causes A rushing air sound may occur when the louver resets its position. The indoor unit makes noises A squeaking sound may occur after running the unit in HEAT mode due to expansion and contraction of the unit’s plastic parts. Low hissing sound during operation: This is normal and is…
-
Troubleshooting
When troubles occur, please check the following points before contacting a repair company. Problem Poor Cooling Performance Possible Causes Solution Temperature setting may be higher than ambient room temperature Lower the temperature setting The heat exchanger on the indoor or outdoor unit is dirty…
-
Problem
The unit is not working Possible Causes Solution Power failure Wait for the power to be restored The power is turned off Turn on the power The fuse is burned out Replace the fuse Remote control batteries are dead Replace batteries The Unit’s 3-minute protection has been activated Wait three minutes…
-
European Disposal Guidelines This appliance contains refrigerant and other potentially hazardous materials. When disposing of this appliance, the law requires special collection and treatment. Do not dispose of this product as household waste or unsorted municipal waste. When disposing of this…
-
The design and specifications are subject to change without prior notice for
product improvement. Consult with the sales agency or manufacturer for details. CS372U-AF 16122000002735 20160607
-
此面无需印刷
: 1.80 / 2. :A4 3. : 4. : , 5.
Схемы, таблицы и рисунки — в просмотре документа выше. Клик по номеру страницы открывает её в просмотре.