Технический каталог RDZ 2023 - Лучистое отопление и охлаждение бренда RDZ

Radiant heating

and cooling TECHNICAL CATALOGUE 07/2023

You

Feel, We Care is our new tagline and contains a renewed promise: to work ever y day with commitment and passion while of fering tangible benef its. And we do this by developing systems which are able to ensure comfor t and health as well as a pleasant living space. We continue to follow the…

Table of Contents

CEILING AND WALL SYSTEMS PAG 04 Traditional b!klimax PAG 06 b!klimax+ with plasterboard PAG 12 b!klimax Air+ PAG 18 b!klimax 8+ with plasterboard PAG 26 b!klimax 8+ HP PAG 32 b!klimax+ Quadrotti PAG 40 Accessories for b!klimax systems PAG 52 UNDERFLOOR RADIANT SYSTEMS WITH LOW THERMAL INERTIA PAG 60…

T50

PAG 140 TF HP PAG 146 TF PAG 152 PRL HP and PRL PAG 158 MANIFOLDS, PIPES AND COMPLEMENTS PAG 166 Manifolds PAG 168 Piping PAG 179 Other complements PAG 187 Acoustic insulation for substrates PAG 188 Additives PAG 190 THERMOREGULATION DEVICES PAG 194 GM and GR mixing and booster units PAG 196 Mixing…

Ceiling and wall

radiant systems 4

Widespread

well-being b!klimax is a heating and cooling system that exploits the ability of the ceilings and walls to exchange heat and cold through radiation with the room and with people. Thanks to the perfectly balance of the thermal exchanges, the human body perceived comfort is improved. Available in…

Traditional b!klimax is a ceiling and wall heating and cooling system characterised by high performance and the absence of thermal bridges, able to guarantee uniform temperature distribution, no air jets and great freedom of finishing. The main components of the system are the 600 and 1200…

SECTION OF THE SYSTEM

Traditional b!klimax panels can be covered with any type of plasterboard or finished directly with a reinforced skim coat. 1 Adjustable hanging 2 Metal structure 3 Distributor with insulation shell 4 Pre-insulated pipe Ø 6mm 5 Pipe Ø 20 mm 6 Radiant panels 7 Plasterboard sheet 8 Finish 8 METAL…

Panel features

Blank panel

This neutral panel is made of polystyrene, thickness 27 mm, and it is used to finish the areas not fitted with thermally active panels. Panel features SIZE WEIGHT CODE 2200x600x27 mm 1.1 Kg 6100700 Pipe insulation for Ø 6 mm pipe Closed-cell elastomeric foam insulating sleeve, smooth on the surface…

Thermal output in heating - ceiling

100 15.4 80 12.3 60 9.2 40 6.2 output [W/m²] ReseHeating riscaldamento [W/m²] 18.5 Intonaco Plaster Piastrelle Tiles Plasterboard Cartongesso 20 Tsurface - Troom [K] Tsuperficie, media - Tambiente [K] 120 3.1 qG (33 °C)* Twater - -Troom [K] Tacqua, media Tambiente [K] 17.5 12.5 7.5 40 5 Intonaco…

80 7.4 60 5.6 40 3.7 Intonaco Plaster Piastrelle Tiles Plasterboard Cartongesso 20 Tambiente - Tsuperficie, Troom [K] [K] - Tsurfacemedia Cooling output [W/m²] Rese raffrescamento [W/m²] Thermal output in cooling - ceiling 1.9 qG * Tambiente - T- acqua, Troom Twatermedia [K] [K] 10 60 7.5 40 5…

b!klimax+ with plasterboard is a room heating and cooling system that uses ceilings and walls as radiant surfaces. Designed to be installed on common metal structures for false ceilings, it does not require invasive interventions and allows to exploit the gap between the ceiling and the radiant…

SECTION OF THE SYSTEM

Adjustable hang 2 Pre-insulated pipe Ø 6mm 3 Plasterboard sheet 4 Metal structure 5 Pre-insulated pipe Ø20 mm 6 Passive filling panel 7 Distributor with insulation shell 8 Painting/grouting 8 ~13 METAL SUPPORT STRUCTURE 55* 12 40 120** b!klimax+ radiant panels are designed to be installed both on…

Panel features

Size of insulating panel Unit Standard 600x2400 1200x2400 1200 mm UNI 822 40 mm UNI 823 UNI EN 12667, 12939 Standard thickness Declared thermal conductivity λd 0.040 W/(m•K) Thermal resistance Rd 1 (m²•K)/W Resistance to compression 10% σ10 70 kPa UNI EN 826 Resistance to point load FP 600 N UNI EN…

18.5 100 15.4 80 12.3 60 9.2 40 6.2 20 Tsurface --TT room [K] [K] Tsuperficie, media ambiente Heating output [W/m²] Rese riscaldamento [W/m²] Thermal output in heating - ceiling 3.1 Resa Output qG (33 °C)* Twater - T [K] [K] Tacqua, Tambiente media - room 17.5 12.5 7.5 40 5 Resa Output 20 2.5 qG (40…

80 10.0 60 7.5 40 5.0 20 Troom [K] - Tsurface Tambiente - Tsuperficie, media [K] Cooling output [W/m²] Rese raffrescamento [W/m²] Thermal output in cooling - ceiling 2.5 Output Resa qG* Troom T Tacqua, [K] Tambiente [K] water media 7.5 2.5 Troom [K] [K] Tambiente - Tsuperficie, - Tsurface media…

b!klimax Air+ is a room heating and cooling system that uses ceilings and walls as radiant surfaces

Invisible, comfortable and healthy, it provides the ideal room climate along with cleaner, healthier air. The central element of the system is the polystyrene or rockwool radiant panel equipped with 4 hydraulic circuits Ø 6 mm and complete with a special plasterboard sheet capable of capturing and…

SECTION OF THE SYSTEM

METAL SUPPORT STRUCTURE ~13 7 1 Hanging metal structure 2 b!klimax Air+ panel 3 Pre-insulated pipe Ø 20 mm 4 Pre-insulated pipe Ø 6 mm 5 Distributor with insulation shell 6 Passive filling panel 7 Painting/grouting 55* 12 40 120** b!klimax Air+ radiant panels are designed to be installed both on…

Panel features

Dimensions: 1200x2400x52 mm Panel features Dimensions: 600x2400x52 mm INSULATION WEIGHT CODE INSULATION WEIGHT CODE Polystyrene Rockwool 33.1 Kg 51.5 Kg 6143114 6143115 Polystyrene Rockwool 16.5 Kg 25.7 Kg 6143169 6143170 b!klimax Air+ panel This radiant panel consists in extra white plasterboard…

18.5 100 15.4 80 12.3 60 9.2 40 6.2 20 Tsurface --Troom [K] Tsuperficie, media Tambiente [K] Heating output [W/m²] Rese riscaldamento [W/m²] Thermal output in heating - ceiling 3.1 Resa Output qG (33 °C)* Twater - T [K] [K] Tacqua, Tambiente media - room Heating output [W/m²] 17.5 12.5 7.5 40 5…

80 10.0 60 7.5 40 5.0 20 Troom--TTsuperficie, Tambiente surface [K] media [K] Cooling output [W/m²] Rese raffrescamento [W/m²] Thermal output in cooling - ceiling 2.5 Output Resa qG* Troom--TTwater [K] Tambiente acqua, media [K] 7.5 2.5 Tambiente - T-superficie, [K] Troom Tsurface media [K] Rese…

COMPLEMENTS FOR SYSTEMS WITH Ø 6 PIPE

Pre-insulated pipe Ø 20 mm TYPE SIZE CODE PB pipe with oxygen barrier according to DIN 4726 EN 12319-2, Ø 20 mm, pipe insulation made of expanded polyethylene, thickness 6 mm. Reaction to fire class: BLs2, d0. It is used to connect distributors with b!klimax manifolds. red roll 50 m blu roll 50 m…

SIZE

INSULATION CODE This ELBOW push-fit fitting is used as 90° shifting for polybutylene pipes Ø 20 mm. It’s provided with polyethylene BL-s1, d0 insulation or without it. Ø 20 mm Ø 20 mm -polyethylene 6510075 6510076 Pre-insulated PB Pipe Ø 6 mm SIZE CODE PB pipe Ø 6 mm with oxygen barrier according to…

b!klimax 8+ is a room heating and cooling system that uses ceilings and walls as radiant surfaces

Invisible and efficient, it guarantees uniform temperature distribution and high thermal comfort in every room. The use of Ø 8 mm pipe also means that there are fewer circuits and therefore fewer components, speeding up installation operations. Designed to be installed on common metal structures for…

SECTION OF THE SYSTEM

Hanging metal structure 2 Distributor with insulation shell 3 Pre-insulated pipe Ø 20 mm 4 Pre-insulated pipe Ø 8 mm 5 b!klimax 8+ panel 6 Passive filling panel 7 Painting/grouting ~13 METAL SUPPORT STRUCTURE 55* 12 40 120** b!klimax 8+ radiant panels are designed to be installed both on walls and…

Panel features

Size of insulating panel Unit Standard 600x2400 1200x2400 1200 mm UNI 822 40 mm UNI 823 0.040 W/(m•K) UNI EN 12667, 12939 Standard thickness: Declared thermal conductivity λd Thermal resistance Rd 1 (m²•K)/W Resistance to compression 10% σ10 70 kPa UNI EN 826 Resistance to point load FP 600 N UNI EN…

18.5 100 15.4 80 12.3 60 9.2 40 6.2 20 Tsuperficie, -room Tambiente Tsurface [K] [K] media- T Heating output [W/m²] Rese riscaldamento [W/m²] Thermal output in heating - ceiling 3.1 Output Resa qG (33 °C)* Twater - T-room [K] Tacqua, media Tambiente [K] 17.5 12.5 7.5 40 5 Resa Output 20 2.5 qG (40…

80 7.4 60 5.6 40 3.7 20 Troom [K] [K] Tambiente - Tsuperficie, - Tsurface media Cooling output [W/m²][W/m²] Rese raffrescamento Thermal output in cooling - ceiling 1.9 Resa Output qG* Troom--TTwater [K] [K] Tambiente acqua, media 80 10.0 60 7.5 40 5.0 20 2.5 Tambiente - Tsuperficie, Troom [K] [K]…

B!KLIMAX 8+ HP

B!klimax 8+ HP is a heating and cooling system that uses ceilings and walls as radiant surfaces. Invisible and efficient, it ensures uniform temperature distribution and a high level of indoor comfort. Thanks to the surface finish consisting of a plasterboard slab admixed with graphite, this system…

SECTION OF THE SYSTEM

Hanging metal structure 2 Distributor with insulation shell 3 Pre-insulated pipe Ø 20 mm 4 Pre-insulated pipe Ø 8 mm 5 b!klimax 8+ HP panel 6 Passive filling panel 7 Painting/grouting ~13 METAL SUPPORT STRUCTURE 55* 12 40 120** b!klimax 8+ HP radiant panels are designed to be installed both on walls…

Panel features

CLASS 4 Application field CLASS 5 Outside diam. (mm) Thickness (mm) 8 1 For use with hot and cold water Tmax 70 °C Pressure 8 bar For use with hot and cold water Tmax 90 °C Pressure 6 bar Circuit Lenght (mm) 600 1200 12 24 Weight (g/m) Water content (l/m) 22 0,028 Blank panel Passive panel…

18.5 100 15.4 80 12.3 60 9.2 40 6.2 20 Tsuperficie, Tambiente Tsurface [K] [K] media- -Troom Rese riscaldamento [W/m²] Heating output [W/m²] Thermal output in heating - ceiling 3.1 Resa Output qG (33 °C)* Twater - T-room [K] Tacqua, media Tambiente [K] 17.5 12.5 7.5 40 5 Resa Output 20 2.5 qG (40…

80 7.4 60 5.6 40 3.7 20 [K] TambienteT-room Tsuperficie, [K] - Tsurface media Cooling output [W/m²][W/m²] Rese raffrescamento Thermal output in cooling - ceiling 1.9 Resa Output qG* Troom--TTwater [K] [K] Tambiente acqua, media 100 9.3 80 7.4 60 5.6 40 3.7 20 Tambiente - Tsuperficie, Troom [K] [K]…

COMPLEMENTS FOR SYSTEMS WITH Ø 8 PIPE

Pre-insulated pipe Ø 20 mm TYPE SIZE CODE PB pipe with oxygen barrier according to DIN 4726 EN 12319-2, Ø 20 mm, pipe insulation made of expanded polyethylene, thickness 6 mm. Reaction to fire class: BLs2, d0. It is used to connect distributors with b!klimax manifolds. red roll 50 m blu roll 50 m…

SIZE

INSULATION CODE This ELBOW push-fit fitting is used as 90° shifting for polybutylene pipes Ø 20 mm. It’s provided with polyethylene BL-s1, d0 insulation or without it. Ø 20 mm Ø 20 mm -polyethylene 6510075 6510076 PE-RT pipe Ø 8 mm SIZE CODE PE-RT pipe Ø 8 mm with oxygen barrier according to DIN…

b!klimax+ Quadrotti is a ceiling heating and cooling system specifically designed for the commercial

applications, consisting of metal ceilings or plasterboard panels onto which, by an aluminium diffuser, the Ø 6 mm pipe is fixed. Thermal insulation is provided by a layer of polystyrene or rockwool. The metal version, available in 600x600 mm or 1200x600 mm, consists of post-painted steel radiant…

SECTION OF THE SYSTEM

Quadrotto panel 2 Metal structure 3 Pre-insulated pipe Ø 20 mm 4 Pre-insulated pipe Ø 6 mm 5 Distributor with insulation shell 6 Fitting with insulation shell SUPPORT STRUCTURE The b!klimax+ Quadrotti metal radiant panels are designed to be installed on the ceiling on a T-shaped metal support frame…

Polystyrene Quadrotto features

Rock wool insulation characteristics

Panel features

Value

Quadrotto features

Dimensions: 600x600x50 mm INSULATION WEIGHT CODE Rockwool 4.9 Kg 6140552 Acoustic radiant plasterboard Quadrotto Radiant panel consisting of a slab with regular square holes, thickness 10 mm, satin finish colour RAL 9010 with high performance: sound absorption (αw=0,4) of the reverberation generated…

Acoustic blank plasterboard panel

Passive panel without hydraulic circuit, with regular square perforated plasterboard sheet, 10 mm thick, white RAL 9010, with high performance in terms of acoustic reverberation absorption (αw=0,8), light reflection and absorption of up to 70% of formaldehyde in the room. Rockwool insulation (fire…

THERMAL OUTPUT OF THE SYSTEM WITH METAL QUADROTTI

15.4 80 12.3 60 9.2 40 6.2 20 Tsurface - Troom [K] 100 Tsuperficie, media - Tambiente [K] Rese riscaldamento [W/m²] Heating output [W/m²] Thermal output in heating - ceiling 3.1 Output Resa qG (33 °C)* Twater --TT [K] Tacqua, media room ambiente [K] Thermal output in cooling - ceiling 100 12.5 80…

THERMAL OUTPUT OF THE SYSTEM WITH STANDARD PLASTERBOARD

QUADROTTI AND ACOUSTIC PLASTERBOARD QUADROTTI 120 18.5 100 15.4 80 12.3 60 9.2 40 6.2 20 Tsurface - Troom [K] Tsuperficie, media - Tambiente [K] Heating output Heating output[W/m²] [W/m²] Rese riscaldamento [W/m²] Thermal output in heating - ceiling 3.1 Resa Output qG (33 °C)* [K] water - --Troom…

COMPLEMENTS FOR SYSTEMS WITH Ø 6 PIPE

Pre-insulated pipe Ø 20 mm TYPE SIZE CODE PB pipe with oxygen barrier according to DIN 4726 EN 12319-2, Ø 20 mm, pipe insulation made of expanded polyethylene, thickness 6 mm. Reaction to fire class: BLs2, d0. It is used to connect distributors with b!klimax manifolds. red roll 50 m blu roll 50 m…

SIZE

INSULATION CODE This ELBOW push-fit fitting is used as 90° shifting for polybutylene pipes Ø 20 mm. It’s provided with polyethylene BL-s1, d0 insulation or without it. Ø 20 mm Ø 20 mm -polyethylene 6510075 6510076 Pre-insulated PB Pipe Ø 6 mm SIZE CODE PB pipe Ø 6 mm with oxygen barrier according to…

Ceiling and wall

radiant systems 52 Complements

b!klimax Cabinet

A This cabinet made of zinc-plated sheet iron is used to contain b!klimax manifolds. There are suitable outlets for pipes both upwards and downwards. The cabinet is equipped with a protective cover for plaster, a white metal door painted with epoxy powders, and lockset. Model A [cm] B [cm] C [cm]…

RDZ Electrothermic Head

The thermo-electric actuator performs the shut-off function on each circuit with control by the room thermostat. It can be installed in any position, even upside-down. The function display of the actuator allows identifying the operating condition (open/ closed). Easy slot assembly thanks to the…

Electrical connection

Electrothermic head 230 V Electrothermic head 230 V with micro 230 V AC L N Max 230 V 5 A resistive load 1 A inductive load 230 V AC Actuator 230 V Thermostat 230 V L N Actuator 230 V with micro Thermostat 230 V Blu Consumers, pump, etc. Brown Brown Black (micro) Blu Gray (micro) Air Trap The air…

Pre-insulated Ø 20 mm pipe

PB pipe with oxygen barrier according to DIN 4726 EN 12319-2, Ø 20 mm, pipe insulation made of expanded polyethylene, thickness 6 mm. Reaction to fire class: BL-s2,d0. It is used to connect distributors with b!klimax manifolds. Application field DIAMETER COLOR PACKAGE CODE 20 mm 20 mm 20 mm 20 mm…

PB Ø 6 mm pipewith oxygen barrier according to DIN 4726 EN 12319-2, pipe insulation made of expanded polyethylene, reaction to fire class BL -s1, d0, thickness 6 mm. It is used to connect b!klimax+ and Quadrotto panels to the distributors. Application field DIAMETER CODE 6 mm 6210006 CLASS 4 For use…

PE-RT Ø 8 mm pipe with oxygen barrier according to DIN 4726 DIN EN ISO 21003-2, thickness 1 mm. It is used to connect b!klimax+ panels with the distributors. DIAMETER CODE 8 mm 6210018 PE-RT pipe characteristics Application field CLASS 4 For use with hot and cold water Tmax 70 °C Pressure 8 bar…

Inibitor XR20

The inhibiting treatment provides protection for heating systems against corrosion. It can be used in installations with aluminium components, and it is suitable for any kind of installation. SIZE CODE 3 liters 10 liters 1091105 1 0 91111 Dosage Application instructions INIBITOR XR20 should be dosed…

with low thermal

inertia 60

Innovation,

with high performance Underfloor heating systems with low thermal inertia are characterised by their ability to respond quickly to the climatic demands of the room in which they are installed, as the floor quickly reaches the desired temperature. Thus it is possible to always obtain the right indoor…

UNDERFLOOR RADIANT SYSTEMS WITH LOW THERMAL INERTIA

HIGH PERFORMANCE AND FAST RESPONSE FOR ALL BUILDINGS Low-thickness systems for new buildings System ON Floor surface temperature In modern buildings characterised by hermetically sealed and insulated envelopes, it is increasingly important to use systems with high thermal responsiveness, which are…

THICKNESSES SUMMARY

Rapid US is an underfloor heating and cooling system with low thermal inertia and reduced thickness,

characterised by Ø 17 mm PE-Xa pipe anchored to an insulated base trough an hook-and-loop fastening system and embedded in the special lowered screed. Thanks to the overall thickness of only 30 mm, it is ideal for building renovations where the space available for the installation is limited.…

SECTION AND DIMENSIONS

5 1 Skirting board 2 Flooring 3 Concrete 4 Rapid PE-RT pipe Ø 17 mm 5 SLIM 5 perimeter belt 6 Rapid US panel 7 Stable, solid and planar subfloor flooring 10 mm ˜50 2 Kg/m Weight of the system calculated with 10 mm level above pipe concrete insulation thick. 17 mm 3 mm Indicative quotas 3 mm Panel…

RAPID US Panel

Honeycomb polypropylene panel covered with a TNT sheet appropriately screen-printed in a 50 mm pitch chequered pattern, which serves as a support for the tubing with a suitable hook system. The panel is presented in sheets folded in two with useful dimensions of 2x1 m and a thickness of 3 mm. SIZE…

SIZE

CODE Open Ø 17 elbow made of plastic material. It is used to support the pipes near the manifolds vertically and to protect them from any damage. Ø 17 mm 1130517 Isocoll 160 SIZE CODE 500 gr 1111112 One-component polyurethane adhesive. Moisture hardener with low viscosity, flexible in use. This…

Thermal output in heating

Input data

Super D17 is an underfloor heating and cooling system with low thermal inertia and reduced thickness, characterised by Ø 17 mm PE-Xa pipe anchored to an insulated base and embedded in the special lowered screed. Thanks to its small dimensions, it is ideal for building renovations where the space…

SECTION AND DIMENSIONS

Skirting board 2 Flooring 3 Concrete 4 PE-Xa pipe Ø 17 mm 5 Perimeter belt 6 Neo Super D17 panel 7 Stable, solid and planar subfloor flooring ˜50 2 Kg/m Weight of the system calculated with 10 mm level on top of the studs concrete 10 mm stud 18 mm insulation thick. 15-34 mm Indicative quotas 15 mm…

Neo Super D17 Panel

Grooved insulation panel made of sintered expanded polystyrene with graphite complying with UNI EN 13163. High compressive strength (500 kPa). These panels have a tongue along the perimeter to connect them for proper combination. They have a moulded surface with reliefs of 18 mm so that the 17-mm…

Slim 9 Perimeter Belt

SIZE CODE The edge insulation Slim 9 absorbs floor expansions and acts as thermo-acoustic insulation for the walls. 5x90 mm 1071100 Open Elbow SIZE CODE Open Ø 17 elbow made of plastic material. It is used to support the pipes near the manifolds vertically and to protect them from any damage. Ø 17…

Thermal output in heating

Input data

Super D is an underfloor heating and cooling system with low thermal inertia and low thickness,

characterised by Ø 12 mm PB pipe anchored to an insulated base and embedded in the special lowered screed. Thanks to its very small footprint, it is ideal for building renovations where the space available for the installation is limited. The low thermal inertia also makes it particularly suitable…

SECTION AND DIMENSIONS

5 1 Skirting board 2 Flooring 3 Concrete 4 PB pipe Ø 12 mm 5 Perimeter belt 6 Super D panel 7 Stable, solid and planar subfloor flooring ˜50 concrete 10 mm stud 16 mm Kg/m2 Weight of the system calculated with 10 mm level on top of the studs 10-20 30-40 mm insulation thick. Indicative quotas (with…

Super D Panel

Slim 9 Perimeter Belt

SIZE CODE The edge insulation Slim 9 absorbs floor expansions and acts as thermo-acoustic insulation for the walls. 5x90 mm 1071100 Open Elbow SIZE CODE Open Ø 12 elbow made of plastic material. It is used to support the pipes near the manifolds vertically and to protect them from any damage. Ø 12…

Thermal output in heating

Input data

Zero Level AD is an underfloor heating and cooling system with low thermal inertia and very low thickness, characterised by Ø 12 mm PB pipe anchored to a thermoformed slab and embedded in the self-levelling concrete. Thanks to its very small size, it is ideal for building renovation projects where…

SECTION AND DIMENSIONS

5 1 Skirting board 2 Flooring 3 Special liquid concrete 4 PB pipe Ø 12x1.3 mm 5 Slim 5 insulation edge 6 Zero Level AD Panel 7 Primer 8 Substrate + levelling flooring flooring ˜50 Kg/m2 concrete 5 mm stud 18 mm System weight calculated with 5 mm level on the studs Indicatives quotas 18 mm Panel…

Zero Level AD Panel

Zero Level AD Panel is made of regenerated plastic material with high density and 1-mm thickness; it ensures a solid base in the building site and can be walked on. These panels have a tongue along the perimeter to connect them for accurate, secure join. Adhesive layer on the back, moulded surface…

Slim 5 Perimeter Belt

SIZE CODE The edge insulation Slim 5 absorbs floor expansions and acts as thermo-acoustic insulation for the walls. 5x50 mm 1200050 Open Elbow SIZE CODE Open Ø 12 elbow made of plastic material. It is used to support the pipes near the manifolds vertically and to protect them from any damage. Ø 12…

Thermal output in heating

Input data

e-Dry Tech is an ultra-light dry underfloor heating and cooling system (weight less than 6 kg/m²) ideal in applications with limited available floor space or where the peculiarities of the building site make it difficult to use either traditional or lowered components. The thickness of e-Dry Tech is…

SECTION AND DIMENSIONS

4 1 Skirting board 2 Flooring 3 Multilayer Pipe Ø 16 4 Slim 5 perimetral belt 5 Thermal diffuser 6 Paper adhesive tape 7 e-Dry panel 8 Isocoll 160 9 Substrate + levelling ˜5 Kg/m2 flooring thermal diffuser insulation thick. flooring x mm 4 mm 25 mm Weight of the system Indicactives quotas Panel…

e-Dry Panel

Grooved insulation panel made of sintered expanded polystyrene complying with UNI EN 13163 (EPS 300). Prefabricated and applied aluminium foil on the top surface for heat emission. Special grooves to support the pipe coming from manifold. Pipe spacing: 15cm. SIZE THICKNESS CODE 1200x750 mm 25 mm…

Tech Load Distribution Layer

SIZE CODE 1000x600x4 mm 1202110 Slim 5 Perimeter Belt SIZE CODE The edge insulation Slim 5 absorbs floor expansions and acts as thermo-acoustic insulation for the walls. 5x50 mm 1200050 Paper adhesive tape SIZE CODE Paper adhesive tape for fixing the synthetic fibre load divider. 50 m 1202165 SIZE…

Thermal output in heating

Input data

e-Dry EVO is a dry underfloor heating and cooling system ideal for renovations, lofts and all contemporary buildings that require very high energy efficiency. In fact, e-Dry Evo is only 34 mm thick, including both the panel and the load distribution board installed instead of the concrete. The…

SECTION AND DIMENSIONS

4 1 Skirting board 2 Flooring 3 Multilayer Pipe Ø 16 4 Slim 5 Perimeter Belt 5 Calcium Silicate Board 6 E-DRY Panel 7 Isocoll 160 8 Substrate + levelling ˜12 2 Kg/m flooring calcium silicate board 9 mm insulation thick. 25 mm Weight of the system Indicative quotas Panel thickness Quote with Tiles…

e-Dry Panel

Grooved insulation panel made of sintered expanded polystyrene complying with UNI EN 13163 (EPS 300). Prefabricated and applied aluminium foil on the top surface for heat emission. Special grooves to support the pipe coming from manifold. Pipe spacing: 15 cm. SIZE THICKNESS CODE 1200x750 mm 25 mm…

Evo Load Distribution Layer

SIZE CODE 1200x1200x9 mm 1202255 Slim 5 Perimeter Belt SIZE CODE The edge insulation Slim 5 absorbs floor expansions and acts as thermo-acoustic insulation for the walls. 5x50 mm 1200050 Paper adhesive tape SIZE CODE Paper adhesive tape for fixing the synthetic fibre load divider. 50 m 1202165 Open…

Thermal output in heating

Input data

Traditional underfloor

radiant system 100

Comfort and consumptions

reduced in every season Traditional underfloor heating systems are the ideal choice for residential and commercial buildings, and for all rooms where it is necessary to maintain a constant internal temperature throughout the day. Made with pipes anchored to an insulating base and embedded in the…

TRADITIONAL FLOOR SYSTEMS

PARAMETERS FOR THE CHOICE OF INSULATION The following is explicitly about the parameters mentioned in the UNI EN 1264-4 standard, which suggests the minimum thermal resistance values to be respected depending on the thermal conditions underneath the room being heated with the floor. HEATED “B, C e…

THICKNESSES SUMMARY

Cover HP is a traditional underfloor heating and cooling system with radiant panels, characterised by pipe anchored to the insulated base and embedded in the screed. Invisible and efficient, it can be used in both residential and commercial applications and it is ideal for applications where it is…

SECTION AND DIMENSIONS

5 1 Skirting board 2 Flooring 3 Concrete 4 RDZ Tech pipe Ø 17-13 5 Plus perimeter belt 6 Cover HP panel 7 Anti-shrinkage mesh 8 Clip 75 9 Hooked clip 10 Substrate + levelling flooring concrete 40 mm stud 28 mm 24-39 47-62 mm insulation thick. Indicative quotas 24 mm 39 mm 47 mm 62 mm Quote with…

Cover HP Panel

RDZ Tech PE-Xa pipe Ø 17-13 made of high-density

cross-linked polyethylene with the oxygen barrier between the PE-X layer and an outer layer made of PE, which ensures further protection during installation in the building site. The layers are combined thanks to a special glue. Plus Perimeter Belt TYPE ROLL CODE PE-Xa PE-Xa 240 m 600 m 1013840…

Thermal output in heating

Input data

Cover is a traditional underfloor radiant heating and cooling system, characterised by pipe anchored to an insulated base and embedded in the screed. Ideal for applications where it is necessary to maintain a constant room temperature throughout the day, it can be used in numerous applications…

SECTION AND DIMENSIONS

5 1 Skirting board 2 Flooring 3 Concrete 4 RDZ Tech pipe Ø 17-13 5 Plus perimeter belt 6 Cover panel 7 Anti-shrinkage mesh 8 Clip 75 9 Hooked clip 10 Substrate + levelling flooring concrete stud insulation thick. 40 mm 28 mm 20-30 mm Indicative quotas Panel thickness 20 mm 30 mm Quote with Tiles…

Cover Panel

Cover panel with studs made of waterproof moulded expanded polystyrene, produced in conformity with UNI EN 13163, with closedcell structure, which has high compression strength. They have a moulded surface with studs of 28 mm so that the pipes can be fitted into the tabs of the panel at spacing of…

RDZ Tech PE-Xa pipe Ø 17-13 made of high-density

cross-linked polyethylene with the oxygen barrier between the PE-X layer and an outer layer made of PE, which ensures further protection during installation in the building site. The layers are combined thanks to a special glue. TYPE ROLL CODE PE-Xa PE-Xa 240 m 600 m 1013840 1013850 Note: for…

Thermal output in heating

Input data

Acoustic Plus is a traditional underfloor radiant heating and cooling system, characterised by pipe

anchored to an insulated base and embedded in the screed. Ideal for applications where it is necessary to maintain a constant ambient temperature throughout the day, it can be used in both the residential and commercial applications, particularly in buildings where the reduction of trample noise is…

SECTION AND DIMENSIONS

5 1 Skirting board 2 Flooring 3 Concrete 4 RDZ Tech pipe Ø 17-13 5 Plus perimeter belt 6 Acoustic Plus panel 7 Anti-shrinkage mesh 8 Clip 75 9 Hooked clip 10 Substrate + levelling flooring 40 mm concrete 28 mm stud insulation thick. 20-30 mm Indicative quotas Panel thickness 20 mm 30 mm Quote with…

Acoustic Plus Panel

RDZ Tech PE-Xa pipe Ø 17-13 made of high-density

cross-linked polyethylene with the oxygen barrier between the PE-X layer and an outer layer made of PE, which ensures further protection during installation in the building site. The layers are combined thanks to a special glue. TYPE ROLL CODE PE-Xa PE-Xa 240 m 600 m 1013840 1013850 Note: for…

Thermal output in heating

Input data

AcuRapid is an underfloor radiant heating and cooling system, characterised by excellent acoustic

properties and quick and easy installation. The central element of the system is the Acurapid B panel made of EPS T elasticised sintered expanded polystyrene, covered with a special screen-printed fabric to facilitate the installation of the Rapid PE-RT pipe Ø 17 mm. Available in the 20 and 30 mm…

SECTION AND DIMENSIONS

5 1 Skirting board 2 Flooring 3 Concrete 4 Rapid PE-RT pipe Ø 17-13 5 Plus perimeter belt 6 Acurapid B panel 7 Substrate + levelling flooring x mm concrete 40 mm 18 mm insulation thick. 20-30 mm Indicative quotas Panel thickness 20 mm 30 mm Quote with Tiles - Parquet flooring 9 - 10 cm 10 - 11 cm…

AcuRapid B Panel

Smooth panels in rolls made of ESPT elastic expanded sintered polystyrene. It is covered with a special protective film barrier which is suitable for attaching the pipe thanks to its hook fastening tape. The foil overlaps on two sides, therefore the foil layer is continuous. Panel features Level/…

Plus perimeter belt

Plus perimeter belt is the edge insulation, which absorbs floor expansions and acts as thermoacoustic insulation for the walls. Open Elbow Open elbow Ø 17 made of plastic material. It is used to support the pipes near the manifolds vertically and to protect them from any damage. Thermofluidifying…

Thermal output in heating

Input data

Smooth Cover HP is a traditional underfloor radiant heating and cooling system, characterised by pipes anchored to an insulated base by special fixing clips and embedded in the screed. Invisible and efficient, it can be used in both residential and commercial applications and it is ideal for…

SECTION AND DIMENSIONS

Skirting board 2 Flooring 3 Concrete 4 RDZ Tech pipe Ø 20-16 5 Plus perimeter belt 6 Smooth Cover HP panel 7 Fixing clip 8 Substrate + levelling flooring 40 mm concrete 25 mm 24-39 47-62 mm insulation thick. Indicative quotas 24 mm 39 mm 47 mm 62 mm Quote with Tiles - Parquet flooring 9.6 - 10.6 cm…

Smooth Cover HP Panel

RDZ Tech PE-Xc Pipe Ø 20 Interior Layer

TYPE ROLL CODE RDZ Tech pipe Ø 20-16 mm made of high-density electrophysically cross-linked polyethylene with oxygen barrier. This pipe is produced according to DIN EN ISO 15875/2 and DIN 4726. PE-Xc PE-Xc 240 m 600 m 1012240 1012600 Plus perimeter belt SIZE CODE Plus perimeter belt is the edge…

Thermal output in heating

Input data

New Plus is a traditional underfloor radiant heating and cooling system, characterised by pipes anchored to an insulated base and embedded in the screed. Distinguished by a total footprint of 7.3 cm (including 4 cm of screed, excluding flooring), it is ideal for new constructions, renovations and…

SECTION AND DIMENSIONS

5 1 Skirting board 2 Flooring 3 Concrete 4 RDZ Tech pipe Ø 17-13 5 Plus perimeter belt 6 New Plus panel 7 Anti-shrinkage mesh 8 Hooked clip 9 Clip 75 10 Substrate + levelling flooring concrete 40 mm stud 20.5 mm insulation thick. 12.5 mm Indicative quotas Panel thickness 12.5 mm Quote with Tiles…

New Plus Panel

New Plus panel with studs made of waterproof moulded expanded polystyrene, produced in conformity with UNI EN 13163, with closedcell structure, which has high compression strength. It is combined with a plastic film, thickness 0.15 mm, in order to protect it from humidity (in compliance with EN…

RDZ Tech PE-Xa pipe Ø 17-13 made of high-density

cross-linked polyethylene with the oxygen barrier between the PE-X layer and an outer layer made of PE, which ensures further protection during installation in the building site. The layers are combined thanks to a special glue. TYPE ROLL CODE PE-Xa PE-Xa 240 m 600 m 1013840 1013850 Note: for…

Thermal output in heating

Input data

T50 is a traditional underfloor heating and cooling system, characterised by pipe anchored to the insulated base and embedded in the screed. The central element of the system is the T50 studded panel made of waterproof moulded expanded polystyrene, produced according to UNI EN 13163, coated…

SECTION AND DIMENSIONS

Skirting board 2 Flooring 3 Concrete 4 RDZ Tech pipe Ø 17-13 5 Perimeter belt 6 Substrate + levelling 7 T50 panel 8 Anti-shrinkage mesh flooring 40 mm concrete 26 mm stud insulation thick. * mm *available height: 21-30-40-46 mm Indicative quotas 21 mm 30 mm 40 mm 46 mm Quote with Tiles - Parquet…

T50 Panel

Insulating studded panel made of waterproof moulded expanded polystyrene (according to UNI EN 13163), with closed-cell structure, which has high compression strength.This panel is combined with a special plastic film in order to protect it from humidity and to improve its resistance to the…

TYPE

ROLL CODE PE-RT 600 m 1014756 RDZ Multilayer Easy PE-RT pipe Ø 16-12 TYPE ROLL CODE PE-RT Type II/Al/PE-RT Type II multilayer pipe Ø 16x2 mm according to UNI EN ISO 21003. SKZ certified. PE-RT/ALL/PE-RT 200 m 1020016 Easy 15 perimeter belt SIZE CODE Is the edge insulation, which absorbs floor…

Thermal output in heating

Input data

TF HP is a traditional underfloor heating and cooling system, characterised by pipe anchored to the

insulated base and embedded in the screed. The central element of the system is the thermoformed TF HP panel, made of sintered expanded polystyrene, produced in conformity to UNI EN 13163. The surface coating is made with a HIPS thermoformed film, that give to the panel a higher resitance to…

SECTION AND DIMENSIONS

5 1 Skirting board 2 Flooring 3 Concrete 4 RDZ Tech pipe Ø 17-13 5 Perimeter belt 6 Substrate + levelling 7 TF HP panel 8 Anti-shrinkage mesh flooring concrete 40 mm stud 23 mm insulation thick. *mm *available height: 10-18-33-40 mm Indicative quotas 10 mm 18 mm 33 mm 40 mm Quote with Tiles…

TF HP Panel

TF HP panel made of expanded sintered polystyrene with graphite, produced in conformity to UNI EN 13163, with closed-cell structure. It is combined with thermoformed film in HIPS, thickness 0.6 mm, in order to improve its resistance to the deformation of the walking surface according to EN 1264.…

TYPE

ROLL CODE PE-RT 600 m 1014756 RDZ Multilayer Easy PE-RT pipe Ø 16-12 TYPE ROLL CODE PE-RT Type II/Al/PE-RT Type II multilayer pipe Ø 16x2 mm according to UNI EN ISO 21003. SKZ certified. PE-RT/ALL/PE-RT 200 m 1020016 Easy 15 perimeter belt SIZE CODE Is the edge insulation, which absorbs floor…

Thermal output in heating

Input data

TF is a traditional underfloor heating and cooling system, characterized by pipe anchored to the insulated base and embedded in the screed. The central element of the system is the studded panel made of waterproof expanded polystyrene, produced according to UNI EN 13163, it is characterized by a…

SECTION AND DIMENSIONS

Skirting board 2 Flooring 3 Concrete 4 RDZ Tech pipe Ø 17-13 5 Perimeter belt 6 Substrate + levelling 7 TF panel 8 Anti-shrinkage mesh flooring concrete 40 mm stud 23 mm insulation thick. *mm *available height: 10-22-30-40 mm Indicative quotas 10 mm 22 mm 30 mm 40 mm Quote with Tiles - Parquet…

TF Panel

Insulating panel with studs made of aintered expanded polystyrene, produced in conformity with UNI EN 13163, with closed-cell structure. This panel is combined with a HIPS thermoformed film, thickness 0.6 mm, in order to improve its resistance to the deformation of the walking surface in compliance…

TYPE

ROLL CODE PE-RT 600 m 1014756 RDZ Multilayer Easy PE-RT pipe Ø 16-12 TYPE ROLL CODE PE-RT Type II/Al/PE-RT Type II multilayer pipe Ø 16x2 mm according to UNI EN ISO 21003. SKZ certified. PE-RT/ALL/PE-RT 200 m 1020016 Easy 15 perimeter belt SIZE CODE Is the edge insulation, which absorbs floor…

Thermal output in heating

Input data

PRL and PRL HP are traditional underfloor heating and cooling systems, characterized by pipe anchored to the insulated base and embedded in the screed. The central element of the systems is the smooth panel produced according to UNI EN 13163 and available in two versions. The first one made of…

SECTION AND DIMENSIONS

Skirting board 2 Flooring 3 Concrete 4 Easy PE-RT Pipe 5 Plus perimeter belt 6 Hooked clip 7 PRL HP panel 8 Substrate + levelling flooring x mm 40 mm concrete 18 mm insulation thick. 20-30 40 mm Indicative quotas Panel thickness 20 mm 30 mm 40 mm (HP only) Quote with Tiles - Parquet flooring 9 - 10…

PRL HP SYSTEM

PRODUCTS THAT COMPOSE THE SYSTEM PRL HP Panel PRL HP smooth insulating panels are used in underfloor heating systems to support the hydraulic circuits. Quick and easy to install, they are suitable for any type of pipe. The panels are made of closedcell sintered expanded polystyrene, EPS class 200…

PRL SYSTEM

PRODUCTS THAT COMPOSE THE SYSTEM PRL Panel Smooth panel in expanded sintered polystyrene, produced in conformity with UNI EN 13163, combined with a silk-screened PET film for guiding the pipe laying. This panel is supplied in rolls with overlap selvedge, and allows the installation of pipe with…

RDZ Tech PE-Xa pipe Ø 17-13 made of high-density crosslinked polyethylene with the oxygen barrier between the PE-X layer and an outer layer made of PE, which ensures further protection during installation in the building site. The layers are combined thanks to a special glue. RDZ Tech PE-Xa Pipe Ø…

SIZE

CODE Open elbow Ø 17 made of plastic material. It is used to support the pipes near the manifolds vertically and to protect them from any damage. Ø 17 mm 1130517 Thermofluidifying Additive 4S SIZE CODE Superfluxing, multidosage, water reducing admixture for concrete to increase its workability and…

Thermal output in heating

Input data

Manifolds, pipes

and complements for underfloor radiant systems 166

Complete, high-performance

and efficient systems Our pipes for underfloor heating and cooling systems are available in a wide range of variants, all characterised by excellent mechanical strength, outstanding corrosion resistance and low oxygen permeability. Flexible and easy to handle, they are also easy and fast to install.…

MANIFOLDS

Top Composit Pre-assembled Manifold TOP COMPOSIT manifold Ø 1” is made of thermoplastic, and it is used to distribute the pipes into the rooms. It is provided with flow meters on each circuit, digital flow and return thermometers with a liquid-crystal display, on-off valves (suitable for…

Control Pre-assembled Manifold

CONTROL manifolds Ø 1” 1⁄4 are made of brass, and they are used to distribute the pipes into the rooms. They are provided with on-off valves (suitable for electrothermic heads), micrometric lockshields with data labels to locate rooms, ball air vent valves and ball drain valves with hose nozzles and…

Pair of Initial Fittings

PACKAGE SIZE CODE Initial fittings provided with thermometers and pockets (0-60 °C), which can be installed into flow and return manifolds. pair Ø 1 ¼” 1053032 Measuring Unit for Flow and Temperature PACKAGE SIZE CODE pair Ø 3/4” 1053040 Measuring device for flow and temperature (optional element…

Flow + Return Manifold Modules

OUTLETS PACKAGE CODE Pair of manifold modules (inflow + return), Ø 1 1⁄4”, made of brass to distribute the pipes into the rooms. They are provided with on-off valves (suitable for electrothermic heads), micrometric lockshields with data labels to locate rooms, and fittings for pipes Ø 17-13. pair…

Easy Steel Pre-assembled Manifold

Pre-assembled manifold Ø 1” made of stainless steel AISI 304, and used to distribute pipe into the rooms. It is equipped with on-off valves (suitable for electrothermic heads) on the return manifold, flow-meters with scale 0 to 5 L/m, digital flow and return thermometers with a liquid-crystal…

Ball Valves

TYPE SIZE PACKAGE CODE Pair of ball valves with total opening, diameter 1” M/F, and pipe unions for CONTROL and TOP COMPOSIT manifolds. straight 90° Ø 1” Ø 1” pair pair 1053050 1053051 Fittings for PE-X and PB pipe SIZE PACKAGE CODE Fittings used with CONTROL and TOP COMPOSIT manifolds. RDZ…

Door and Frame Slim

White metal powder-coated frame and door with lockset for SLIM cabinet. Outward thickness 2 mm. 4 screws are supplied as standard, and they shall be used to fix frame and door to the cabinet body. MODEL SIZE FRAME CODE Slim 50 Slim 75 Slim 100 560x620x2 mm 810x620x2 mm 1060x620x2 mm 1158300 1158375…

Mixing Group PF

Mixing module suitable for the regulation and control of small underfloor heating systems. It includes a mixing valve with temperature range up to 50 °C (for heating only), electronic circulation pump, one-way valve, balancing bypass, piping for the connection with Easy Steel manifolds, brackets to…

Overall Dimensions of the Manifold and “MIXING GROUP”

Cabinet for “TOP COMPOSIT” Manifolds E G F A F3/4” water production return B F3/4” water production supply C Mixing unit D Thermostatic element E Fixing Collars F Self-adjusting Electronic Circulator G Water supply manifold H Water return manifold * Provide shut-off valve H E D C B * A * Number of…

RDZ Electrothermic Head

The thermo-electric actuator performs the shut-off function on each circuit with control by the room thermostat. It can be installed in any position, even upside-down. The function display of the actuator allows identifying the operating condition (open/ closed). Easy slot assembly thanks to the…

Air Trap

Air traps are used to vent constantly out air from the hydraulic circuits in radiant heating and cooling systems. Venting power of these devices is very high. They make it possible to vent all the air in the circuits, including bubbles, automatically. With horizontal connections FLOW RATE SURFACE…

PIPES

RDZ Clima PB Pipe Ø 12 mm RDZ Clima pipe Ø 12 made of polybutylene with anti-oxygen barrier, excellent flexibility for easy installation on low-temperature systems. It is produced in compliance with DIN 16968 and DIN 4726. for Quota Zero AD and Super D system Application field DIAMETER ROLL CODE 12…

RDZ Tech Pipe PE-Xa Ø 16 is a crosslinked polyethylene pipe manufactured using the Organic Peroxide method, with EVOH oxygen barrier (5 layers) that prevents the permeability of the pipe to oxygen that may cause corrosion of metallic parts in the system. This pipe has a 75% average crosslinking…

PE-RT Type II/Al/PE-RT Type II multilayer pipe Ø 16x2 mm according to UNI EN ISO 21003. SKZ certified. Suitable for use in radiant heating and cooling systems. for e-Dry Tech and e-Dry Evo system Features THICKNESS ROLL CODE 2 mm 2 mm 200 m 300 m 1020016 1030016 Stratigraphy 3- Aluminium thick. 0.2…

Tubo in polietilene reticolato ad alta densità, con barriera anti-ossigeno secondo DIN 4726 conforme alle normative DIN EN ISO 21003/2 o DIN EN ISO 15875/2. for all traditional systems excluding Acurapid DIAMETER ROLL CODE 17 mm 17 mm 240 m 600 m 1011240 1011600 Stratigraphy 3- Oxigen barrier 5…

RDZ EASY 5-layer PE-RT (non-crosslinked Polyethylene of Raised Temperature) provided with EVOH anti-oxygen according to DIN 4726, it is suitable for underfloor heating and cooling systems. Diameter 17 mm, thickness 2 mm, natural color. for all traditional systems excluding Acurapid DIAMETER ROLL…

for all traditional systems excluding Acurapid RDZ Tech Pipe PE-Xa Ø 17 is a crosslinked polyethylene pipe manufactured using the Organic Peroxide method, with EVOH oxygen barrier (5 layers) that prevents the permeability of the tube to oxygen diffusion, eliminating the problem of oxygen supply to…

RDZ 17-13 polyethylene pipe with EVOH oxygen diffusion barrier which complies with DIN 4726. It consists in 5 layers PERT II/EVOH/PE-RT II ensuring outstanding flexibility & easy handling. A microinterlocking band is helically wound around the pipe. Certifications: SKZ A820 for Acurapid system…

High density cross-linked polyethylene pipe with anti-oxygen barrier according to DIN 4726 in accordance with DIN EN ISO 15875/2. for Smooth Cover HP system DIAMETER ROLL CODE 20 mm 20 mm 240 m 600 m 1012240 1012600 Stratigraphy 3- Oxigen barrier 2- Adhesive 1- PE-Xc 5- PE-Xc 4- Adhesive Application…

OTHER COMPLEMENTS

Fibreglass Mesh Alkali-proof fibreglass mesh to reinforce concrete. Pattern: 40x70 mm. SIZE CODE 100x200 cm 1092100 Clip 75 CODE The fixing clips are made of plastic material and they are used to secure the reinforcement mesh. 1111002 Fibreglass mesh characteristics Value Sheet dimensions Unit…

ACOUSTIC INSULATION FOR SUBSTRATES

ACU UTL-M SIZE Acoustic matting with high adhesion power composed mainly of natural materials such as rubber and cork that is able to attenuate impact noise under cladding in a thickness of only 2 mm. Suitable for stone, ceramic, resilient and multilayer parquet floor coverings. THICKNESS CODE 20 m…

ACU UPL-T

Single-sided acrylic adhesive tape with TNT, grey in colour, specifically for sealing and jointing underfloor acoustic coverings. Suitable for floating floors as well as for stone floors or thermal insulation floors whose installation requires the use of adhesives or glues. ROLL CODE 25 m 1054232…

ADDITIVES

Biocide XR40 This sanitiser provides protection for surface heating and cooling systems against bacterial and fungal contamination. Such contamination can cause blockages in some parts of the installation, for example in the pipes, manifolds, valves or heat exchanger. Non-corrosive substance, easy…

Protect-No Freeze

Antifreezing additive with inhibiting treatment to control corrosions, encrustations and the microbiological growth in any kind of heating system, included those systems containing aluminium components. The dosage of PROTECT - NO FREEZE depends on the level of rotection against the cold climate…

MANIFOLDS AND ACCESSORIES

Site equipment Unwinder Unwinder made of tropicalized steel, provided with ball bearings to guarantee optimal rotation. It is adjustable according to the dimensions of the roll. It can be completely disassembled, and it is ideal for 600-m rolls. CODE 1201000 Multiclip Fixer Multiclip fixer to secure…

Flaring Tool for Pipe Ø 12-17-20

Calibrator to adjust pipes diameter before using it with push-fit fittings. SIZE PACKAGE CODE Ø 12x1.3 mm Ø 17x2.0 mm Ø 20x2.0 mm 1 item 1 item 1 item 1130510 1010017 1010020 SIZE PACKAGE CODE Ø 0÷28 mm 1 item 2019000 Pipe cutter Made of plastic material. Package: 1 item. 193

Thermoregulation

devices 194

Controlled

efficiency The correct functioning of a radiant system passes through the choice of the right thermoregulation device which, in addition to guaranteeing the maximum performance of the system, must be able to be easily installed even where space is limited. For this reason, in order to reduce the…

GM PF mixing unit is a central heating device for distributing the thermovector fluid in radiant floor, wall and ceiling systems used only for heating. The flow temperature is regulated by a fixed-point mixing valve with thermostatic element. Inside the unit there is a high-efficiency electronic…

°C °C Water inlet from water heating source 2 Fixed point mixing valve 3 Circulator 4 Probe/safety thermostat holder 5 Supply water thermometer with ball valve 6 Water supply to the system 7 Water return from the system 8 Return thermometer with ball valve and non-return valve 9 Device for forcing…

Thermoregulation with the use of GM PF unit

6 radiator zone Zone 1 (e.g. living area) 4 2 Zone 2 (e.g. sleeping area) radiator thermostat thermostat zone 1 thermostat zone 2 zone 1 floor zone 2 floor °C °C °C °C Boiler 1 Boiler 2 Mixing unit GM PF 3 Direct supply unit GR 4 Room thermostat 5 Radiant underfloor or ceiling system 6 Radiator 7…

GM PF-CF mixing unit is a technical room device for distributing the thermovector fluid in radiant underfloor, ceiling and wall heating and cooling systems. The supply water temperature is regulated by an electronic hot/cold fixed point mixing valve. Inside the unit there is a high-efficiency…

°C °C Water inlet from water production source 2 Mixing valve with hot/cold fixed point electronic servomotor 3 Circulator 4 Probe/safety thermostat holder 5 Supply water thermometer with ball valve 6 Water supply to the system 7 Water return from the system 8 Return thermometer with ball valve and…

Zona 1 (e.g. living area) 7 7 Zone 2 (e.g. sleeping area) DEHUMIDIFIER DEHUMIDIFIER TIG 14 zone 2 TIG 14 zone zone 1 floor zone 2 floor °C °C °C °C Heat pump (alternative option) 6 1 Buffer tank Hydraulic separator to be used in case of 2Z manifold instead of 2Z-CS Boiler Chiller Buffer tank 1…

GM VJ mixing unit is a technical room device for the distribution of the thermovector fluid in radiant underfloor, ceiling and wall heating and cooling systems. The supply temperature is regulated by a mixing valve controlled by a 24 V servomotor driven by 0-10 signal. Inside the unit there is a…

°C °C Water inlet from water production source 2 Mixer with 24V electronic servomotor and 0-10 V signal 3 Circulator 4 Probe/safety thermostat holder 5 Supply water thermometer with ball valve 6 Water supply to the system 7 Water return from the system 8 Return thermometer with ball valve and…

Thermoregulation with the use of GM VJ unit

BUS Row Outdoor sensor 8 Zone 1 ON OFF 21 22 °C Min Max CRONO TH CORE TH 7 Zone MODE 8 CORE MCT 0-10 DEHUMIDIFIER DEHUMIDIFIER zone 1 floor 7 zone 2 floor 40 60 °C °C °C °C Heat pump (alternative option) Hydraulic separator to be used in case of 2Z manifold instead of 2Z-CS INERTIAL Boiler Chiller…

GM 3-POINT MIXING UNIT

GM 3-POINT mixing unit is a technical room device for distributing the thermovector fluid in radiant underfloor, ceiling and wall heating and cooling systems. The flow temperature is regulated by a mixing valve controlled by a 230 V servomotor driven by 3-point signal. Inside the unit there is a…

GM 3-POINT MIXING UNIT

°C °C Water inlet from water production source 2 Mixer with 230 V servomotor and 3-point signal 3 Circulator 4 Probe/safety thermostat holder 5 Supply water thermometer with ball valve 6 Water supply to the system 7 Water return from the system 8 Return thermometer with ball valve and non-return…

Thermoregulation with the use of GM 3-point unit

4 7 Zone 1 (e.g. living area) 7Zone 2 (e.g. sleeping area) Easy-Clima DEHUMIDIFIER DEHUMIDIFIER BT AT TIG 14 zone 1 TIG 14 zone zone 1 floor zone 2 floor °C °C °C °C Heat pump (alternative option) 6 1 Boiler Tank Hydraulic separator to be used in case of 2Z manifold instead of 2Z-CS Boiler Chiller…

GM 3-POINT MIXING UNIT

GR DIRECT SUPPLY UNIT

GR direct supply unit is a technical room device for direct non-mixed water supply to manage high temperature systems and dehumidifiers. The unit features a high-efficiency electronic circulator with variable flow rate and head that ensures low power consumption. The unit is completed with two…

GR DIRECT SUPPLY UNIT

°C °C Water inlet from water production source 2 Shut-off ball valve 3 Circulator 4 Probe/safety thermostat holder 5 Supply water thermometer with ball valve 6 Water supply to the system 7 Water return from the system 8 Return thermometer with ball valve and non-return valve 9 Device for forcing…

DN 25

MIXING AND DIRECT SUPPLY UNITS

ACCESSORIES FOR GM AND GR UNITS Z Manifolds Distribution manifolds for GM mixing units and/or GR direct supply unit. Their easy installation helps the arrangement of the boiler room. They shall be used if there is a tank acting as hydraulic separator. The manifold consists in a steel body with Ø…

System with 2Z collector and

water taken from technical storage tank System 1 System example with 2Z-CS manifold and water directly supplied from heat pump System 2 System 1 System 2 Heat Pump Heat Pump Mixing Unit VJ DN 25 60 °C °C °C °C °C °C °C °C Mixing Unit VJ DN 25 Mixing Unit VJ DN 25 Mixing Unit VJ DN 25 Manifold 2Z CS…

Mixing Box is a thermoregulation device for radiant heating and cooling underfloor systems

In particular, it is a hydraulic substation composed by a series of modules that mix and relaunch the thermovector fluid towards the emitting devices, including radiant underfloor systems, dehumidification units, air handling units and hydronic post-treatment batteries. The direct supply units (GR)…

Components

Supply valve 1 Probe holder supply 1 Return valve 1 Probe holder return 1 Supply valve 2 Probe holder supply 2 Return valve 2 Probe holder return 2 Supply valve 3 Probe holder supply 3 Return valve 3 Probe holder return 3 Pump for zone 3 14 Return pipe zone Pump for zone 2 Return pipe zone 2 Mixing…

Technical data

MIXING BOX PERFORMANCES

Direct supply unit (GR) Available pressure [mbar] Flow rate [l/min] Thermostatic mixing unit (PF) Available pressure [mbar] Flow rate [l/min] Electronic mixing unit (VJ) Available pressure [mbar] Flow rate [l/min] 220

PF THERMOREGULATION KIT

The Kit is a device that includes in a single product, suitable for installation in room, the radiant distribution part (underfloor system), temperature control and high temperature outlets for connecting up to 3 radiators. The PF version, in particular, is suitable for managing heating only. It is…

A

PF KIT

Example Thermoregulation with PF kit 3-way thermostatic mixing valve 2 Balancing lockshield 3 One-way valve 4 Shut-off valves 5 Connector for power supplycontrol 6 Wiring box 7 Air trap 8 Thermostat 9 High-efficiency circulation pump 10 Underfloor heating KIT HYDRAULIC PERFORMANCES (performance of…

EASY CLIMA TERMOREGULATION KIT

The Kit is a device that includes in a single product, suitable for installation in room, the radiant distribution part (underfloor system), temperature control and high temperature outlets for connecting up to 3 radiators. The Easy Clima model, in particular, is suitable for managing both heating…

EASY CLIMA KIT

Easy-Clima Kit with Control manifold

EASY CLIMA KIT

KIT HYDRAULIC PERFORMANCES (performance of electronic self-regulating circulator) PRESTAZIONE DEL CIRCOLATORE ELETTRONICO AUTOREGOLANTE H/m p/kPa MTR -c Δp m ax 2 . 0,5 1,0 1,5 2,0 2,5 PRESTAZIONE DEL CIRC H p [kPa] [m] 3,0 Q/m³/ h 0.0 0.5 1.0 1.5 2.0 2.5 PRESTAZIONE DEL CIRC ELETTRONICO AUTORE H/m…

VJ 0-10 THERMOREGULATION KIT

The kit is a device that includes in a single product suitable for installation in the room, the radiant distribution part (underfloor system), temperature control and high-temperature units for connecting up to 3 radiators. The VJ model, in particular, is suitable for managing system operation in…

VJ 0-10 KIT

Thermoregulation with VJ 0-10 kit

Air to water heat pump (instead of chiller and boiler) 2 VJ thermoregulation kit 3 Outdoor sensor 4 RNW dehumidifier 5 CTE 6 Trio Plus 1 (Master) 7 Trio Plus 2 (Slave) 8 Underfloor heating and cooling 9 Storage tank 9 8 The proposed layout is indicative HYDRAULIC PERFORMANCES KIT (performance of…

OPTIONALS FOR PF, EASY CLIMA AND VJ KITS

3-way Air Trap SIZE CODE This 3-way air separator (M 1 ¼” - F ¾” M ¾”) is made of brass, and it is used to eliminate the air in the radiant system. M 1” ¼ - F ¾” - M ¾” HT Manifolds with 2 or 3 outlets SIZE CODE Pair of manifolds made of brass diam. ¾” MF, distance between outlets 45 mm, Eurocone ¾”…

VALVES AND ACTUATORS

230 V Electrothermal Head Electrothermic servocontrol to manage each circuit through room thermostat. It is provided with limit microswitch, and it can be installed in any position, even upsidedown. Display of the functioning mode (open/close), easy installation thanks to fast hooking adapter…

Valve Body VM3 1”, 1” ¼ and 1” ½

The reversible electric motor can be manually activated, and it is equipped with limit microswitch. It can be installed on VM3 mixing valves (code 3270030 and 3270035). Stroke 6.5 mm. Protection class IP42. VALVE BODY DN VALVE OUTLETS KV CODE Ø 1“ Ø 1“ ¼ Ø 1“ ½ Ø 1“ ½ Ø 2“ Ø 2“ ¼ 3270325 3270332…

for industral

applications 234

The ideal climate

even in large spaces Underfloor heating systems are particularly suitable for installation in buildings such as industrial ones with high heights, as the diffusion of heat by radiation allows heating at eye level. The uniformity of the temperatures, in addition to ensuring a pleasant sensation of…

INDUSTRIAL SHAPED SYSTEM

flooring Industrial shaped panel system is a low-temperature underfloor heating system characterised by pipes anchored to an insulated base and embedded in the screed. It is an ideal solution to benefit from the installation advantages offered by a civil system even in the case of large industrial…

INDUSTRIAL SHAPED SYSTEM

SECTION AND DIMENSIONS 4 1 Quartz 2 Concrete 3 RDZ Tech pipe Ø 20-16 4 Insulation edge 5 Reinforced mesh 6 Industrial Shaped Panel 7 Nylon 8 Hooked clip 9 Fixed rolled screed flooring concrete variable depth stud 27 mm insulation thick. 20 mm PRODUCTS THAT COMPOSE THE SYSTEM Industrial shaped panel…

Panel features

Value Unit Standard 1170x837x20 mm UNI 822 Standard thickness 47 mm UNI 823 Insulation base thickness 20 mm Thermal conductivity 10 °C 0.033 W/(m • K) UNI EN 12667 Compressive stress at 10% deformation 200 kPa UNI 826 Resistance to compression with 5% deformation 180 kPa UNI 826 Resistance to…

INDUSTRIAL SHAPED PANEL SYSTEM

Open elbow SIZE CODE Open elbow Ø 20 made of plastic material. It is used to support the pipes near the manifolds vertically and to protect them from any damage. Ø 20 mm 1140020 Hooked clip PACKAGE CODE Hooked clips made of plastic material to ensure secure positioning of the pipe on the insulating…

PVC BAR SYSTEM

PVC bar system is a solution for underfloor heating in industrial buildings characterised by pipes housed in a support bar anchored to an insulating panel base. The central element of the system is the PVC bar with U-shaped profile in which the PE-Xc Ø 20 or PEXa 25 mm pipe is placed. Thanks to the…

PVC BAR SYSTEM

SECTION AND DIMENSIONS Quartz 2 Concrete 3 RDZ Tech pipe Ø 20 or 25 4 Industrial perimeter belt 5 Reinforced mesh 6 Supporting bar 7 Smooth extruded panel 8 Fixing Clip 9 Fixed rolled screed flooring concrete supporting bar insulation thickness variable depth 20-30-40 50-60-80 mm PRODUCTS THAT…

Panel features - Smooth extruded panel

Symbol Unit Standard Necessary Length L1 1250 mm EN 822 Necessary Width W1 600 mm EN 822 Total Thickness T4 20 mm EN 823 CS(10\Y) 250 300 kPa EN 826 CC(2/1,5/50) NPD 130 kPa EN 1606 0.035 W/(m•K) EN 12667 2.25 (m2•K)/W EN 13163 Vol. % EN 12088 0.7 Vol. % EN 12087 DS(70, 90) Class Compressive stress…

PVC BAR SYSTEM

RDZ Tech PE-Xa Pipe Ø 25 Interior Layer

TYPE ROLL CODE RDZ Tech PE-Xa pipe Ø 25-20.4 made of highdensity polyethylene with type-a cross-linking. This pipe is produced according to DIN 16892 and DIN 4726. PE-Xa PE-Xa 200 m 600 m 1013920 1013900 Industrial Perimeter Belt SIZE CODE 10x300 mm 1071110 Fixing clip PACKAGE CODE The fixing clips…

flooring

Industrial mesh system is a solution for underfloor heating in industrial buildings characterised by piping anchored to the mesh by special clips and embedded in the screed. The system is ideal for winter air-conditioning of large warehouses and can be laid directly on rolled and stabilised gravel…

SECTION AND DIMENSIONS

4 1 Quartz 2 Concrete 3 RDZ Tech pipe Ø 20 or Ø 25 4 Industrial perimeter belt 5 Reinforced mesh 6 Smooth extruded panel 7 Nylon 8 Clip Industry 9 Anti-shrinkage mesh Ø 6 10 Fixed rolled screed flooring concrete insulation thickness variable depth 20-30-40-50 60-80 mm PRODUCTS THAT COMPOSE THE…

Panel features - Smooth extruded panel

Symbol Unit Standard Necessary Length L1 1250 mm EN 822 Necessary Width W1 600 mm EN 822 Total Thickness T4 20 mm EN 823 CS(10\Y) 250 300 kPa EN 826 CC(2/1,5/50) NPD 130 kPa EN 1606 0.035 W/(m•K) EN 12667 2.25 (m2•K)/W EN 13163 Vol. % EN 12088 0.7 Vol. % EN 12087 DS(70, 90) Class Compressive stress…

Panel features - 500 kPa

Industrial Perimeter Belt

SIZE CODE 10x300 mm 1071110 SIZE CODE Ø 20x6 mm 1140640 SIZE CODE Ø 25x6 mm 1140625 Open elbow SIZE CODE Open elbow made of plastic material. It is used to support the pipes near the manifolds vertically and to protect them from any damage. Ø 20 mm Ø 25 mm 1140020 1140025 Industrial edge insulation…

for industral

applications 250 Complements

MANIFOLDS AND ACCESSORIES

Control Pre-assembled Manifold CONTROL manifolds Ø 1” 1⁄4 are made of brass, and they are used to distribute the pipes into the rooms. They are provided with on-off valves (suitable for electrothermic heads), micrometric lockshields with data labels to locate rooms, ball air vent valves and ball…

Industry Manifold

Industry manifold made of stainless steel Ø 2”, used to distribute pipes Ø 25 mm in warehouses. It includes shut-off ball valves and registers, an air and load cock, inflow and return thermometers (0-60 °C), fittings for pipes Ø 25 mm. code Ø 20 outlets code Ø 25 1145205 1145005 11+11 1145211…

Interior Layer Pipe made of high-density electrophysically crosslinked polythylene with oxygen barrier. This pipe is produced according to DIN EN ISO 15875/2 and DIN 16892 guaranteeing even and stable cross-links and constant characteristics over time Suitable for all industrial systems DIAMETER…

RDZ EASY 5-layer PE-RT (non-crosslinked polyethylene of raised temperature) provided with EVOH anti-oxygen according to DIN 4726, it is suitable for underfloor heating and cooling systems Suitable for all industrial systems DIAMETER ROLL CODE 20 mm 600 m 1014766 Stratigraphy 3- EVOH 2 - 2nd adhesive…

RDZ Tech PE-Xa Pipe Ø 25 Interior Layer

RDZ Tech PE-Xa pipe Ø 25-20.4 made of high-density polyethylene with type-a cross-linking. This pipe is produced according to UNE-EN ISO 15875: 2004 European regulations and ISO 9001. Suitable for Pvc bar and Industrial mesh system DIAMETER ROLL CODE 25 mm 25 mm 200 m 600 m 1013920 1013900…

OTHER ACCESSORIES

Pipe Band SIZE CODE Pipe bands made of plastic and used to block pipes in industrial systems. 20 cm 1130001 Joint Sleeve SIZE CODE L. 300 - Ø 28 mm L. 500 - Ø 40 mm 1142028 1142040 Light Felt SIZE CODE Light felt made of polypropylene flocks, thickness 5 mm, density 500 g/m2. It is used for thermal…

Our

history For 45 years we have been a worldwide reference company in the field of heating and cooling systems. We work with passion to ensure indoor comfort thanks to innovative solutions, specifically for residential, commercial and industrial buildings. We design and produce high-efficient and…

Технический каталог RDZ 2023 - Лучистое отопление и охлаждение

Текст каталога

Новое в каталогах

Новое в инструкциях