Каталог продукции Aquatherm 2022 - Трубопроводные системы из материала fusiolen
Каталог продукции Aquatherm 2022 - Трубопроводные системы из материала fusiolen Aquatherm green pipe для систем питьевого водоснабжения и отопления
Загружаем документ…
Текст каталога
-
Официальный представитель завода
Группа Компаний Агпайп www.agpipe.ru +7(495)928-0008 info@agpipe.ru aquatherm green pipe Pipe system For potable water supply aquatherm state of the pipe
-
NEW SINCE THE LAST VERSION
Page Change – The Naming faser changed into fibre – Article Number Overhaul. 84-86 Pages got removed. NOTE: aquatherm green pipe and aquatherm blue pipe are divided into separate catalogues. The order number for the aquatherm blue pipe catalogue is E10050.
-
TABLE OF CONTENTS
Service 4 Product overview Short cuts & symbols 6 8 Systems & features aquatherm polypropylene pipe systems 10 aquatherm green pipe 11 Composite technology 14 aquatherm green pipe ti 15 Potable water installation & heating systems 16 Comparison of the water content per meter 18 Ring stiffness 19…
-
SERVICE
TECHNICAL HOTLINE +49 2722 950 200 info@aquatherm.de www.aquatherm.de { { Headquarters Attendorn Subsidiary Radeberg aquatherm GmbH Biggen 5 57439 Attendorn Germany Phone: +49 2722 950 0 aquatherm GmbH Wilhelm-Rönsch-Str. 4 01454 Radeberg Germany Phone: +49 3528 4362 0 Technical sales Training Trade…
-
Certifications in accordance with ISO 9001, 14001 & 50001
Since 1996 aquatherm fulfills the requirements of the quality management system according to DIN ISO 9001. The 2012 TÜV certificate was extended by the environmental management system according to ISO 14001 and currently by the energy management system according to ISO 50001. This success is another…
-
ABBREVIATIONS
-
SHORT CUTS & SYMBOLS
Abbreviations pipe structure Abbreviations material S single-layer PP polypropylene M multi-layer PP-R polypropylene random copolymer MF RP UV OT TI multi-layer, fibre-reinforced raised pressure resistance UV-resistant oxygen-tight thermally insulated PP-RCT PE-RT polypropylene random copolymer with…
-
Dear readers,
We are always making decisions – in every minute of every hour of every day. At this moment, you have decided to open our catalogue to consciously find out more about our company aquatherm. Without knowing the reason behind your decision, we can promise you one thing, namely that the insight into…
-
aquatherm pipe systems
AQUATHERM POLYPROPYLENE PIPE SYSTEMS AQUATHERM PIPE SYSTEMS The history of the aquatherm pipe systems began in 1973 when Gerhard Rosenberg founded a company for warm water underfloor heating systems. Initially, the owner´s garage and basement served as the company´s headquaters and production…
-
aquatherm green pipe has revolutionized the plastic piping sector and has
proven its technical suitability worldwide for decades. The innovative green pipe from aquatherm is made of corrosion-resistant, chemically inert polypropylene. It is completely free of heavy metals and toxic chemicals and thus ideally suited for potable water applications. aquatherm green pipe can…
-
Pipe system made of polypropylene
-
SDR
ø: 7.4 / 9 20–355 mm Type of pipe: aquatherm green pipe MF / MF RP SDR: ø: SDR: ø: 7.4 / 9 20–355 mm Type of pipe: aquatherm green pipe MF UV / MF RP UV Type of pipe: aquatherm green pipe MF RP ti aquatherm green pipe SDR9 MF RP Advantages: aquatherm sets the innovation standard in the manufacture…
-
COMPOSITE TECHNOLOGY
PP-RCT layer Fibre layer PP-RCT layer aquatherm green pipe MF FIBRE COMPOSITE TECHNOLOGY Advantages of aquatherm green pipe MF: aquatherm green pipe MF is a multi-layer fibre-composite pipe. The pipe is made in a multi-layer extrusion process. The manufacturing process developed by aquatherm enables…
-
aquatherm green pipe ti
aquatherm ti PRE-INSULATED PIPE SYSTEMS FOR DISTRICT HEATING AND COOLING One of the most energy-efficient methods of transporting hot potable water as well as heating or cooling water over long distances is the use of underground piping. For this application, high demands are made on both the medium…
-
APPLICATION
aquatherm green pipe POTABLE WATER AND HEATING INSTALLATIONS The aquatherm green pipe system offers all installation options with an environmentally friendly material: from the house connection station via the hot or cold water distribution and the boiler connection to the last tapping point…
-
APPLICATION
Distribution network for domestic water and heating in residential buildings All risers and distribution pipes are planned and assigned as usual. 1. Distribution piping The dimensionally stable straight length pipes should be used for conventionally installed basement pipes, risers and multi-storey…
-
COMPARISON OF THE WATER CONTENT PER METER [L]
-
RING STIFFNESS OF aquatherm green pipe
All aquatherm polypropylene pipes have a ring stiffness of ≥ 16kN/m2 (according to DIN EN ISO 9969) and therefore can be classified in the ring stiffness class SN16. Underground installation: The depth of the trench adds up from the depth of the frost line, the outer diameter of the pipe and the…
-
PERMISSIBLE WORKING PRESSURE – POTABLE WATER
20 °C 68 °F 30 °C 86 °F aquatherm green pipe SDR 11 S Years of service Temperature Fluid transported: water according to DIN 2000 aquatherm green pipe SDR 7.4 S aquatherm green pipe SDR 6 S aquatherm green pipe SDR 7.4 MF Permissible working pressure in bar and (psi) bar (psi) bar (psi) bar (psi)…
-
PERMISSIBLE WORKING PRESSURE
-
UV-RESISTANCE
Pipes made from fusiolen® polypropylene are normally not exposed to UVradiation during installation. To bridge the transport and assembly time, aquatherm polypropylene pipes and fittings are packed in UV-protected packaging. The maximum permissible storage time outdoors is 6 months. For outdoor pipe…
-
INTEGRATION OF OTHER SYSTEMS OR COMPONENTS
WITH AQUATHERM PIPING FOR PRESSURE PIPE APPLICATIONS When integrating aquatherm piping systems with other systems or components not made of polypropylene (e.g. valves, pumps, other piping, check valves, strainers, etc), care must be taken to ensure the operating parameters for polypropylene won’t…
-
The aquatherm polypropylene pipe systems comply with the requirements of
the fire classification B2 DIN 4102 (normal inflammable). Compared to natural products like wood, cork or wool, aquatherm PP-R pipes do not produce any gas toxicity. In case of fire, there is no risk of dioxin emissions. To avoid fire and smoke transmission aquatherm advises the use of fire…
-
Roku System AWM II in the wall
Roku System AWM II in the ceiling Roku System AWM II with synthesis rubber in the wall Roku System AWM II with synthesis rubber in the ceiling Rockwool Conlit 150 U in the wall Rockwool Conlit 150 U in the ceiling 25
-
3.4 Kunststoff-/Mehrschichtverbundrohre
EXCERPT FROM THE ROCKWOOL PLANNING AND INSTALLATION AID R 30- bis R 90-Rohrdurchführungen für die aquatherm Installationssysteme mit nichtbrennbaren Medien, R 30- toz.R B. 90 Trinkwasser, pipe penetrations for the aquatherm Heizung, Kälte installation systems with non-combustible media, such as…
-
FIRE LOAD
The values required for determining the fire load within a fire section are calculated from the total of all flammable materials located within this area. The calculation for establishing the combustion heat V [kWh / m] for a fire section in the event of an outbreak is dependent on dimensions and…
-
The advantages
of aquatherm pipes and fusiolen® polypropylene • • • • • • • • • • • • Corrosion resistant Resistant against many chemicals High environmental compatibility Less pipe roughness Heat and soundinsulating characteristics Very good welding properties High heat-stabilized High mechanical stability…
-
Certificates
Numerous international certificates testify to the high quality standard of the green pipes. DVGW, SKZ, HIG (Germany) AENOR (Spain) ÖVGW (Austria) WRAS (UK) SAI-Global (Australia) CSTB, CARSO (France) SII (Israel) TIN (Poland) SITAC, KIWA, SWEDCERT (Sweden) IIP (Italy) BNQ (Canada) BRANZ (New…
-
ENVIRONMENTAL PRODUCT DECLARATION AND
LEED CERTIFICATION As the world´s first pipe system manufacturer, aquatherm has developed an Environmental Product Declaration (EPD) for its products. Thus the aquatherm products contribute to the attainment of points in the LEED system. Learn more about the importance of life cycle assessments…
-
COMPLIANCE WITH THE SYSTEM STANDARD
Various national and international independent authorities and institutions confirm aquatherm’s quality standard. You can see our certificates on our website at www.aquatherm.de/products/certificates AQUATHERM QUALITY MANAGEMENT SYSTEM INTERNAL CONTROL SYSTEM CONTROL TEST AND ACCEPTANCE IN-PROCESS…
-
SYSTEM CONTROL
The production of a quality controlled pipe system demands the supervision, regulation and control of all work operations. All results and processes have to be documented. This requires test and acceptance of incoming goods process control in-process inspection and test final inspection and test The…
-
Test and acceptance of incoming goods
Final inspection and test All incoming goods are subject to a test. This ensures that incoming products conform to specified requirements. Goods which have not been tested are not released for production. After completion of the products, all final inspections specified in the test plan are…
-
EXTERNAL CONTROL
External supervision consists of tests of a defined scope and in defined intervals. The respective supervising institutions appoint authorized test organizations to carry out these tests. The external supervision includes external tests of the products and a) internal audit of aquatherm’s quality…
-
The following laws, decrees, guidelines and standards have to be considered on
planning and designing aquatherm PP-R pipes for potable water and heating installations:* System specific standards: Hygiene BfR Federal Institute for risk assignment Planning: Health assessment of plastics and non-metallic materials within the framework of the law for foods and commodity goods for…
-
PART A: TOOLS AND ACCESSOIRES
The professional processing of aquatherm PP-R medium pipes is made by the following tools for the connection of insulated pipes and fittings by socket welding or by butt-welding. IMPORTANT! Only use the original aquatherm equipment except devices and tools which are especially approved by aquatherm.…
-
PART A: ASSEMBLY OF WELDING TOOLS
1. a quatherm green pipe and aquatherm blue pipe system are processed identically. 2. Assemble and tighten the cold welding tools manually. 3. Before fusing the distribution block, in which two connections are fused simultaneously, the welding tools have to be placed into the respective holes as…
-
handle
PART A: HEATING UP PHASE / HANDLING Temperature pilot lamp (yellow) glows constantly while the heat-up phase and blinks, when the welding temperature is achieved Heating plate Operating lamp (green) glows constantly, as soon as the device is connected with the power supply system Welding tools…
-
PART B: CHECKING OF DEVICES AND TOOLS
Check, if the aquatherm welding devices and tools comply with the guidelines “Fusion Part A”. The devices and tools used must have reached the required operating temperature of 260 °C for heating element socket welding or 210 °C for buttwelding. This requires according to “Fusion Part A, item 8” a…
-
PART B: HEATING OF PIPE AND FITTING
4. Push the end of the pipe, without turning, up to the marked welding depth into the welding tool. pipe dimension mm welding tool Art. no. 16 – 32 9800050336 16 – 63 9800050337 75 – 125 9800050341 / 9800050148 It is essential to observe the aforementioned heating times. ATTENTION: Heating-up of…
-
PART B: UNIVERSAL PEELING TOOLS By using the aquatherm universal peeling tools the end pieces of the aquatherm UV (UV-resistant) can be peeled. By the uniform removal of the outer layer of the pipe any extension of the pipe system by electrofusion socket or fitting is possible. The universal peeling…
-
aquatherm weld-in saddles are available for pipe outer diameter of
40–630 mm. Weld-in saddles are used for • Branch connections in existing installations • The substitution of a reduction-tee • Branch connections in risers • Sensor wells, etc. Drilling through the pipe wall The maximum sensor well diameter is specified in the table on page 47. 1. Before starting…
-
Dimension
-
Art. no
-
PART C: WELD-ON SADDLE
Drilling of aquatherm PP pipes with the hot tapping tool Art. no. 9800050890 under pressure. The aquatherm weld-on saddle set (consisting of ball valve, pipe and saddle in the dimensions 40 mm and 63 mm) is used for the additional installation of branch connections. The PP-R pipes aquatherm green…
-
PART D: WELDING JIG (HITCH)
Note The following description of the electric welding jig applies to the type of the year 2013. Operation and fusion With the help of the electric welding jig, all aquatherm polypropylene pipes and fittings in dimensions from 63 to 125 mm are in a very simple manner without any effort welded…
-
PART D: WELDING JIG (HITCH) Preparation for the fusion The welding jig is now placed on the fitting or pipe to be welded with the clamping jaws (Fig. 4). The two arrows of the jaws and the machine must be flush with each other. The jaws are to be fixed with the help of the clamping device (Fig. 5).…
-
PART D: WELDING JIG (HITCH) Fusion Hold the welding device between pipe and fitting and ride machine carriage in batches together (pay attention to the welding depth). Basically the jaws must be released after the insertion of pipe and fitting in the welding tool by a short return of the machine…
-
PART E: AQUATHERM WELDING MACHINE
for stationary processing 50–125 mm precise pre-assembly and facilitation by hand creek clamping jaws 50–125 mm, tools 50–125 mm Scope of supply: wooden transport box, slide with sub-construction, clamping jaws 50–125 mm, welding tools 50–125 mm, stay with rolls For welding of aquatherm green…
-
PART E: WELDING MACHINE PRISMA-LIGHT
Welding machine prisma-light with heating plate without tools Clamping fixture for fixing the prisma-light e. g. at the work bench 1. Check machine: temperature lamp blinks after reaching the welding temperature (260 °C), adjust clamping jaws 63–125 mm coarsely. Mark welding depth with the template…
-
The aquatherm electrofusion device was specially developed for
electrofusion sockets from Ø 20–250 mm. The fusion of 160–250 mm aquatherm blue pipe MF OT with the electrofusion socket is not possible. Technical information: supply voltage: 230 V (nominal voltage) nominal capacity: 2.800 VA, 80 % ED rated frequency: 50–60 Hz protection class: IP 54 aquatherm…
-
Peel the surface of both pipes up to the marks thoroughly with a peeling
tool (use the aquatherm peeling tool with the respective pipe diameter). IMPORTANT! Before the fusion peel off the oxygen barrier layer of the aquatherm blue pipe OT and the UV-layer of the fibre composite pipe UV completely to the stop by using the universal peeling tools considering the pipe…
-
Remove the protective foil completely and push the other prepared pipe
end into the aquatherm electrofusion socket as far as it will go tighten in the fixation. Leave the pipes, free from bending stress or own weight, within the aquatherm electrofusion socket. The socket is movable at both pipe ends after assembling. The air gap has to be even around the circumference.…
-
REPAIR OPTIONS
Pipe repairs with the aquatherm green pipe electrofusion socket Cut squarely 3 to 4 lengths of a fitting out of the defect pipe, symmetrically to the defect. Fit the new pipe into this gap. Prepare the pipe ends of the existing pipe as in the case of a new welding. Peel the new piece of pipe on both…
-
Before welding, pipes are cut into the required lengths
PART G: BUTT-WELDING OF PIPE DIMENSION 160–630 mm The following aquatherm pipes series are available: aquatherm green pipe SDR 11 S for cold water aquatherm green pipe SDR 7.4 / 9 / 11 MF fibre-composite pipe aquatherm blue pipe SDR 11 / 17.6 MF fibre-composite pipe Check performance of the welding…
-
PART G: BUTT-WELDING OF PIPE DIMENSION
160–630 MM 11. After the heating element has been positioned, the pipes are pushed onto the heating plate with a defined adjusting pressure. 12. After reaching the specified bead height (see table) the pressure is reduced. This process marks the beginning of the heating time. This time is for…
-
Visual inspection of fusion seam – Misalignment and gap width for butt welding
Gap width up to 355 mm outer diameter = 0.5 mm Gap width from 400 mm to 630 mm outer diameter = 1 mm The misalignment cannot be more than 10% of the wall thickness or max. 2 mm Welding defects during butt-welding Normally a bead around the entire circumference is formed at the edge of the socket…
-
Correct butt welded seam
The visual inspection may be only a first indication of the welding seam quality. It is not a replacement for the leak test, which has to be carried out after the completion of the installation. Requirements for welding The immediate welding area is to be protected against bad climatic conditions…
-
FLANGE CONNECTIONS
THE FOLLOWING MUST BE OBSERVED IN THE USE OF FLANGE CONNECTIONS: Flange adapter respectively the sealing surfaces must always be aligned parallel to each other. A subsequent tightening of the flange connection after the welding process must be avoided. It is important to ensure that the flange faces…
-
FASTENING TECHNIQUE / FIXED POINTS /
INSTALLATION ADVICE / LINEAR EXPANSION / SLIDING POINTS CONCEALED INSTALLATION Fastening technique Installation advices Pipe clamps for aquatherm pipes must be dimensioned for the external diameter of the plastic pipe. aquatherm pipe clamps are perfectly suited for fixed point and sliding point…
-
INSTALLATION IN DUCTS
1 Installation in ducts (vertical) Due to the different linear expansion of the aquatherm pipes with or without stabilization, the installation of pipe branches in risers has to be made according to the selected type of pipe. aquatherm green pipe MF aquatherm blue pipe MF The linear expansion of…
-
OPEN INSTALLATION / CALCULATION OF THE LINEAR EXPANSION
Open installation (horizontal) Calculation of the linear expansion In case of open installed pipes (e.g. in the basement), excellent optical characteristics and form stability are important. aquatherm pipes for cold water and aquatherm fibre composite pipes for hot water and heating plants make this…
-
LINEAR EXPANSION
-
таблицы и схемы — в просмотре
-
PIPE CLAMPS suitable as fixing point
aquatherm offers fixed-point fastenings for pipes from 160 mm–630 mm (Art. no. 9600060768–9600060790). Packing unit is each with 1 piece. Advantages: • Reliable and permanent protection against perforation corrosion and breakdown of the static load capacity • 1000 hours salt spray test without…
-
BENDING SIDE
Linear expansion due to temperature difference between operating temperature and installation temperature can be compensated by different installation techniques. Bending side In most cases direction changes can be used to compensate for linear expansion in pipes. The values of the bending side can…
-
PRE-STRESS / BELLOW EXPANSION JOINT
Expansion loop If the linear expansion cannot be compensated by a change in direction, it will be necessary to install an expansion loop with long and straight pipelines. Pre-stress In addition to the length of the bending side LBS the width of the pipe bend Amin. must be considered. Where space is…
-
LENGTH OF BENDING SIDE
-
LENGTH OF BENDING SIDE WITH PRE-STRESS
-
SUPPORT INTERVALS
aquatherm green pipe SDR 6 S Table to determine support intervals in conjunction with temperature and outside diameter. Pipe diameter d (mm) Difference in temperature DT [K] Support intervals in cm aquatherm green pipe SDR 11 S Table to determine support intervals in conjunction with temperature and…
-
SUPPORT INTERVALS
aquatherm green pipe SDR 7.4 MF (fibre composite pipes) Table to determine support intervals in conjunction with temperature and outside diameter. Difference in temperature DT [K] Pipe diameter d (mm) Support intervals in cm Pipe clamp distances of vertically installed pipes can be increased by 20 %…
-
THERMAL INSULATION OF HOT WATER PIPES
minimum insulation thickness in [mm] against condensation Medium temperature 5°C – thermal conductivity value of insulation 0.040 W/(mK) Dimension humidity ambient temperature 20°C 50 % 75 mm 22°C 24°C 26°C 28°C 30°C 32°C 34°C 36°C 38°C 40°C % 2 70 % % % % % % 110 mm 50 % 160 mm 60 % % % The decree…
-
INSULATION THICKNESS ACCORDING TO ENERGY SAVING REGULATION
-
PRESSURE TEST/TEST CONTROL/
MEASURING OF THE TEST PRESSURES/TEST RECORD Pressure test/Test control All aquatherm pipe systems shall be subjected to a hydraulical pressure test with a test pressure of 10 bar. The material properties of the aquatherm pipe systems result in an expansion of the pipes during the pressure test. This…
-
LEAKAGE TEST/PRESSURE DIAGRAM
PRELIMINARY TEST Working pressure 18 bar* 0 bar 5 min 5 min 5 min PRINCIPAL AND FINAL TEST Working pressure 10 bar Dpmax = 0.5 bar Dpmax = 0.5 bar Principal test Final test 15 min * Exception: aquatherm blue pipe SDR 17.6: 10 bar 78 75 min
-
TEST RECORD AQUATHERM SYSTEM INSTALLATION
Place: Object: Note before the test: 3 x 5 minutes system pressure of 18 bar or 10 bar for expansion/release of the pipes are required. Preliminary test for SDR 6, SDR 7.4, SDR 9 and SDR 11 The pipe system must be unpressurized between each cycle. 18 bar 5 min realized: yes no 18 bar 5 min realized…
-
DESCRIPTION OF INSTALLATION
-
FLUSHING OF PIPES / EARTH WIRE /
TRANSPORT AND STORAGE Flushing of pipes aquatherm polypropylene pipes may be stored outside at any temperature. A solid base for the pipe is very important to avoid a deformation of the pipes while in transport and storage. The technical rule for potable water installations (TRWI) DIN 1988, Part 2…
-
WATER POINT CONNECTIONS
aquatherm green pipe back plate elbow for twin water point connections with galvanized mounting plate and sound insulation plate (Art. no. 7020000015) from the fixing program (gauge for bore holes 220-153-80 mm) aquatherm green pipe back plate elbow for dry construction installed in a pipe chase…
-
DISTRIBUTION BLOCK
EXAMPLE OF APPLICATIONS Example of applications The stamped numbers 1 and 2 indicate the proper connection of the aquatherm green pipe distribution block. They provide assistance with the installation. In case of the “heating” connection variant (top A), the return is connected to the supply channel…
-
CHEMICAL RESISTANCE
CHEMICAL RESISTANCE Due to their special material properties aquatherm green pipe resp. aquatherm blue pipe and fittings are generally chemical resistant. However, aquatherm green pipe transition elements with thread inserts made of brass are not suitable for all media. For industrial application of…
-
WARRANTY
EXPLANATORY COMMENTS ON THE AQUATHERM GMBH WARRANTY 1. Foreword 2.1.3 Thank you very much for making the decision to use a product from aquatherm GmbH, Germany (herein referred to as “aquatherm”). With more than 45 years of experience in the international plastic pipes market, and our trendsetting…
-
WARRANTY
EXPLANATORY COMMENTS ON THE AQUATHERM GMBH WARRANTY 4. How is the amount of compensation under the aquatherm warranty determined? In the event of a material failure, samples of the damaged/faulty product are collected by the national aquatherm partner to forward them to aquatherm GmbH for…
-
таблицы и схемы — в просмотре
-
DIN 1988 T3 / MAXIMUM FLOW RATE /
PRINCIPLES OF CALCULATION / CAD AND BIM DATA DIN EN 806 PART 3 AND DIN 1988 PART 300 Principles of calculation DIN EN 806 part 3 and DIN 1988 part 300 (Technical Rules for Potable Water Installations) specifies the calculation principles for the determining of the pipe diameter. To determine the…
-
MINIMUM FLOW PRESSURE
Minimum flow pressures and minimum values for the calculation flow of common potable water tapping points DN Minimum flow pressure pminFl MPa Calculation flow VR l/s 15 0,05 0,3 20 0,05 0,5 25 0,05 1 10 0,1 0,15 15 0,1 0,15 Shower tub 15 0,1 0,15 Bath tub 15 0,1 0,15 Kitchen sink 15 0,1 0,07…
-
MIMINUM FLOW PRESSURES
Total flow Contrary to the flow direction – starting at the most distant tapping point and normally ending at the domestic water meter – the calculation flows have to be added and the total flows obtained in this way have to be assigned to the corresponding sections. Permanent flows are to be shown…
-
MIMINUM FLOW PRESSURES
Determination of the peak flow rate VS from the total flow ∑VR for residential buildings according to DIN 1988 part 3 VS = 1,7 · (∑VR)0,21 – 0,7 [l/s] Special buildings, commercial and industrial plants For special buildings (i.e. building types other than those listed in table 3) and potable water…
-
L
-
Notice on planning & design of compressed air applications
When planning and designing pipe systems for compressed air applications, the following working pressures are to be observed. aquatherm green pipe SDR 9 10 bar (145 psi) This chart is valid for temperatures from 10 °C to 40 °C. For temperatures and conditions other than those noted in the chart…
-
Coefficient of loss z aquatherm green pipe distribution block
Picture Comment Potable water installation Reduced 25 mm passage in case of separation of flow Cold water 25 mm passage in case of separation of flow Hot water Potable water installation Cold water 20 mm passage in case of separation of flow Picture Heating installation Return Flow Heating…
-
TERMS AND CONDITIONS
Important note regarding our sales, warranty and delivery conditions: Our sales and delivery conditions (issue: 2014) as well as the contact details of our technical sales department and our representatives can be found on our website www.aquatherm.de. Errors, misprints and technical modifications…
-
aquatherm GmbH
Biggen 5 | 57439 Attendorn | Tel.: +49 2722 950 0 info@aquatherm.de | www.aquatherm.de aquatherm green pipe - Pipe system made of polypropylene For potable water supply www.tuv.com ID 0091005348 Order-No.: 9900000049 Edition: 01.2022 Management System ISO 9001:2015 ISO 14001:2015 ISO 50001:2011
Схемы, таблицы и рисунки — в просмотре документа выше. Клик по номеру страницы открывает её в просмотре.