Сантехника Отопление Кондиционирование

Ошибка B1 теплового насоса HISEER

← Все коды ошибок тепловых насосов HISEER

Unit's action to deal with the fault ST replaces RT as temperature control reference. control water temperature +5C on heating mode, -5C on cooling mode. If ST sensor faulted too, unit is switched off.

Серии: AS07-10-20V, AS10-13-20S/L, AS15V/LF, GS07-30, GS07-30B

Ошибка B1 в разных сериях HISEER

СерияКак описан код в инструкцииИсточник
AS07-10-20VUnit's action to deal with the fault ST replaces RT as temperature control reference. control water temperature +5C on heating mode, -5C on cooling mode. If ST sensor faulted too, unit is switched off.стр. 56
AS10-13-20S/LUnit will continue to run until it reaches preset temperature. CM02 later, it will start again.стр. 56
AS15V/LFUnit's action to deal with the fault ST replaces RT as temperature control reference. control water temperature +5C on heating mode, -5C on cooling mode. If ST sensor faulted too, unit is switched off.стр. 60
GS07-30, GS07-30BUnit will continue to run until it reaches preset temperature. CM02 later, it will start again.стр. 66

Серии, которых нет в таблице, сверяйте с таблицей кодов своей серии: значение кода может отличаться.

Соседние коды

Текст — по руководствам производителя из библиотеки «СОК». Расшифровка относится к перечисленным сериям; для других моделей смотрите их инструкцию.