Инструкция на Клапаны и измерительные устройства Lindab
Заслонки Sliding Dampers Lindab серии SKMTR, SKPTR. Инструкция по монтажу.
Смотрите также: Инструкция по монтажу →
Загружаем документ…
Текст инструкции
-
Mounting instruction
Sliding dampers SKMTR SKPTR
-
SKMTR, SKPTR
Assembly Install the damper as per instructions for straps or flanges. Check that the space before/beyond the damper allows the damper blade to be fully opened. When installing SKPTR with automatic opening and closing function, the risk of personal injury must be considered. The damper must…
-
SKMTR, SKPTR
Example of control for automatic damper Electrical signal to solenoid valve The solenoid valve on the damper is connected to 230 V or 24 V from the governing process (e.g. a processing machine). Connection: • Compressed air 5-8 bar is connected by a 6 mm compressed air hose to the solenoid valve. •…
-
SKMTR, SKPTR
Control signal from current sensor In a current sensor EMI-03 a circuit is closed when the sensor is activated by a suitable electric current. Via control unit EMI-01 the solenoid valve is supplied with 230 V when the sensor is activated. The control unit contains a potentiometer where damper…
-
SKMTR, SKPTR
Structure of the automatic damper RK design 1. Cylinder 2. Connection 3. Sealing housing 4. Throttle valves A. Closing B. Opening 5. Solenoid valve 6. Compressed air supply (6 mm) 7. Cable contact 8. Solenoid 9. Screw for manual operation of valve 10. 11. 12. 13. Socket for microswitch Damper…
Схемы, таблицы и рисунки — в просмотре документа выше. Клик по номеру страницы открывает её в просмотре.