Инструкция на Тепловые насосы воздух-вода Toshiba серии ESTIA R32

Текст инструкции

1. Стр. 1 AIR TO WATER HEAT PUMP

2. Стр. 3 • Products and parts to be used in combination with this product

   must be specified products and parts that meet prescribed specifications. If unspecified products or parts are used, a failure, smoke, fire, or electric shock may be caused. Operation warnings • Avoid injury or damage to the Outdoor Unit by never inserting fingers or sticks into the air discharge or…

3. Стр. 4 • Do not put a container with water, such as a vase, on the unit,

   should water enter the unit the result may lead to an electric shock, this would be due to deterioration in the electric insulation. • Perform occasional checks to the concrete supports underneath the Outdoor Unit. If the base is left damaged or deteriorated, the unit may topple over which could…

4. Стр. 5 2 Names and functions of parts

   Meaning of Indication on the top screen Fig. 2-02  Buttons In normal In failure occurring Fig. 2-01 ZONE1 [ 4 [ 5 [ 6 [ 7 [ 8 [ HEAT/COOL [ 2 [ Code : A01 MON 2 ] button ] button HEAT/COOL HOT WATER HOT WATER Lights when controlling the second temperature (It may not light depending on the…

5. Стр. 6

   Lights when Night setback operation is set to “ON” and heating or cooling is selected. Lights while Silent mode operation is actually running. Lights while hot water boost is actually running. Lights when Anti bacteria operation is set to “ON” and hot water operation is selected. Lights while Frost…

6. Стр. 7 ■ Auto mode operation

   ■ Menu items • The setting temperature can be set automatically according to the outside temperature. MENU Auto mode Schedule timer (1) Press the [ ]/[ ] button to select “Auto mode” on the “MENU” screen, then press the [ ] button. … Page 6 (DN) … Page 7 Silent mode … Page 7 Hot water boost … Page 7…

7. Стр. 8

   To set the Scheduled operation patterns • See “Setting -Schedule setting-” (Condition setting and Holiday setting). • When setting time comes, the set operation is started automatically. ■ Night setback (3) Press the [ ] button. The set time is registered. Night setback Code (DN) Data FIX • This…

8. Стр. 9 ■ Anti bacteria

   (3) P ress the [ • This setting regularly raises the hot water cylinder temperature to prevent bacteria from growing. • The anti-bacteria operation is performed to maintain the temperature (75°C) for the period (30 minutes) when the preset start time (22:00) comes according to the preset cycle (7…

9. Стр. 10

   ■ Setting – Initial setting – ■ Clock ■ Screen contrast (1) P ress the [ ]/[ ] button to select an “Setting” on the “MENU” screen, then press the [ ] button. • Setting for the clock (date, month, year, time) • Contrast adjustment of the LCD (1) Press the [ ]/[ ] button to select “Clock” on the…

10. Стр. 11 ■ Header / Second

    ■ Temperature control • For a dual remote controller system. • Set one of remote controller as the header remote controller. • Set another remote controller as the second remote controller. • To control room temperature instead of water temperature with this remote controller. Please check with the…

11. Стр. 12

    ■ Clock synchronisation ■ Setting – Schedule setting – • Set clock synchronisation. • When this function is “ON” and clock setting is changed in central controller, clock setting will be changed automatically. • This function is available only for the header remote controller. (1) Press the [ ]/[ ]…

12. Стр. 13 Easy method of setting up ranging over a day in Schedule operation

    To copy the settings of the previous day (1) Press the [ ] button to select the day, then press the [ ] button to copy the settings of the previous day. There are two methods. (1) If “24:00” is set to “End” and “00:00” is set to “Start” next day, the previous operation status will be continued. And…

13. Стр. 14

    ■ Holiday setting ■ Information ■ Service information • Set the days of the week when the schedule timer not used. (1) Press the [ ]/[ ] button to select “Information” on the “MENU” screen, then press the [ ] button. • Shows the contact number for service. (1) Press the [ ]/[ ] button to select…

14. Стр. 15 4 User maintenance

    ■ General Specifications Outdoor Unit Periodic maintenance (once a year) is necessary for this product. Consult the installation company. If a problem occurs, contact the installation company or dealer. Single Phase model 5 Air to Water Heat Pump operations and with Cord heater Outdoor Unit…

15. Стр. 16 6 Troubleshooting

    Hydro Unit (4 kW, 6 kW model) Hydro Unit Back up heater capacity (kW) HWT-601XWHM3W-E HWT-601XWHM6W-E 3.0 6.0 for back up heater Power supply Leaving water temperature HWT-601XWHT6W-E for hot water cylinder heater (option) If a problem occurs, contact the installation company or dealer. 6.0 220-240V…

16. Стр. 17 7 Technical parameters

    Technical parameters for heat pump combination heater Climate condition : average climate Technical parameters for heat pump space heater Outdoor unit Climate condition : average climate Outdoor unit Models: HWT-401HW-E HWT-601HW-E - - Air-to-water heat pump: Hot water cylinder yes yes…

17. Стр. 18 Technical parameters for heat pump combination heater

    Technical parameters for heat pump space heater Climate condition : average climate Climate condition : average climate Outdoor unit Models: HWT-801H(R)W-E HWT-1101H(R)W-E HWT-1401H(R)W-E HWT-1101XWHM3W-E HWT-1401XWHM3W-E HWT-1101XWHM6W-E HWT-1401XWHM6W-E HWT-1101XWHT6W-E HWT-1401XWHT6W-E…

18. Стр. 19 Technical parameters for heat pump combination heater

    Technical parameters for heat pump space heater Climate condition : average climate Climate condition : average climate Outdoor unit Models: HWT-801H8(R)W-E HWT-1101H8(R)W-E HWT-1401H8(R)W-E HWT-1101XWHM3W-E HWT-1101XWHM3W-E HWT-1401XWHM3W-E HWT-1101XWHM6W-E HWT-1101XWHM6W-E HWT-1401XWHM6W-E…

19. Стр. 20

    ul. Gdańska 131, 62-200 Gniezno, Poland 2F301520014

Схемы, таблицы и рисунки — в просмотре документа выше. Клик по номеру страницы открывает её в просмотре.