Инструкция на Топливные фильтры Oventrop

Oventrop Инструкция PDF · 158.26 Kb Русский

Технические данные фильтров Oilpur

Скачать PDF

Стр. 1

Загружаем документ…

Текст инструкции

Valves, controls + systems

Heating oil filters “Oilpur” The Oventrop Quality Management System is certified to DIN-EN-ISO 9001 Function: The Oventrop heating oil filters “Oilpur” are produced for one and two pipe systems. The filters for two pipe systems are additionally equipped with a non-return check valve on the return…
Types of installation

As the output of the burner pump is higher than the nozzle capacity, the excess must be expelled. 3 types of connection are possible: Two pipe system: Supply and return pipe to the tank; the oil flow corresponds to the burner pump output. A non-return check valve on the return side prevents the oil…
One pipe system

Only one pipe from the tank to the burner. The oil flow corresponds to the burner nozzle capacity (heat output in kW: 10 corresponds to the nozzle capacity in l/h). The excess oil is fed into the supply inside the burner pump (not possible with each pump). One pipe filter without isolation, item…
Cleaning or replacement of the filter insert

It is recommended to replace the filter insert at the beginning of each heating period or to clean it with heating oil or detergent. Close isolating valve, unscrew collar nut and remove filter cup. Loosen the filter insert by turning it anticlockwise and remove it. Refit the new or cleaned filter…

Схемы, таблицы и рисунки — в просмотре документа выше. Клик по номеру страницы открывает её в просмотре.