Инструкция на Регулирующие вентили с резьбовым соединением
Технические данные регулирующего вентиля Hydroset MTR PN 25
Смотрите также: Основной документ →
Загружаем документ…
Текст инструкции
-
with metering station with measuring technique “classic”
Datenblatt The Oventrop Quality Management System is certified to DIN EN ISO 9001 Description: The Oventrop “Hydroset MTR” PN 25 is a double regulating valve “Hydrocontrol VTR” with integrated metering station with measuring technique “classic”. Max. operating temperature ts: 150°C Min. operating…
-
with metering station with measuring technique “classic”
“Hydroset MTR” PN 25 Double regulating and commissioning valve “Hydrocontrol VTR” with metering station with measuring technique “classic” and female threads L t H D Tender specification: “Hydroset” valves (water pH value 6.5-10) with female threads according to EN 10226, not suitable for steam.…
-
with metering station with measuring technique “classic”
Correction factors for mixtures of water and glycol: When antifreeze liquids are added to the heating water, the pressure loss obtained from the chart must be multiplied by the correction factor f. 5 °C 20 °C 1.3 20 °C 1.2 35 °C Correction factor f Correction factor f 5 °C 1.3 35 °C 1.2 50 °C 50 °C…
Схемы, таблицы и рисунки — в просмотре документа выше. Клик по номеру страницы открывает её в просмотре.