Инструкция на Наружные водоохлаждаемые блоки VRF-системы V4+ (сервис мануалы)
Наружные блоки системы VRF V4+ с жидкостным охлаждением конденсатора (R410a V4 Plus W 50Hz). Часть 2. Рекомендации по подбору. Сервис мануал.
Смотрите также: Сервис мануал →
Загружаем документ…
Текст инструкции
-
Part 2
MCAC-VTSM-2012-09 Selection Procedure 1 Introduction 15 2 Unit selection (Based on cooling load) 18 14 Selection Procedure
-
1 Introduction
1.1 Model Selection Procedure Select the model and calculate the capacity for each refrigerant system according to the procedure shown below. ●Calculate the indoor air-conditioning load, calculate the maximum air-conditioning load for each room or zone. Selection of an air conditioning system…
-
1.3 Outdoor Unit Selection
Allowable combinations are indicated in INDOOR UNIT COMBINATION TOTAL CAPACITY INDEX TABLE. In general, outdoor unit can be selected as follows though the location of the unit, zoning and usage of the rooms may be considered. The indoor and outdoor unit combination is determined that the sum of…
-
If the corrected capacity is smaller than the load, the size of indoor unit has to be increased and repeat the same selection procedure. 1.4 Variation in capacity in accordance with the length of refrigerant pipe 1.4.1 Cooling capacity modification Modification coefficient of the length and high…
-
2 Unit Selection (Based on cooling load)
2.1 Given condition 2.1.1 Design condition (Cooling: Indoor 20°C (WB), Outdoor 35°C (DB)) 2.1.2 Cooling load Location Room A Room B Room C Room D Room E Room F Load (kW) 2.1 2.8 3.5 4.6 5.8 7.2 2.1.3 Power supply unit: Outdoor 380~415V-3Ph-50Hz, Indoor 220~240V-1Ph-50Hz. 2.1.4 Pipe length: 50m 2.1.5…
-
2.4 Conclusion
Generally, we think this result is acceptable, so we can think we have accomplished the calculation. But if you think this result is not acceptable, you can repeat the above process. Remark: In this sample, we don’t consider the other capacity modification index and assume them are 1.0. For more…
Схемы, таблицы и рисунки — в просмотре документа выше. Клик по номеру страницы открывает её в просмотре.