Инструкция на Контроллеры Gateways
Контроллеры Gateway CCM08. Инструкция по установке.
Смотрите также: Инструкция по эксплуатации →
Загружаем документ…
Текст инструкции
-
CCM08 Setup Guide
Each CCM08 has a individual default IP address. You can get this IP address from the label sticked on the CCM08 or from the manual. You should modify this IP address to match the network address. CCM08 and the computer should work at the same subnet. For example, the IP of CCM08 is 192.168.208.231…
-
2. Right click on the icon of Local network, choose ‘Properties’
3. Choose ‘Internet Protocol (TCP/IP)’, click ‘Properties’. 4. Now we can see Internet Protocol propertis as below
-
Modify the IP address and subnet mask.
-
Click OK to save the modify
5. Open brower and enter the IP address of CCM08(in this example, it is 192.168.208.231), enter the page of CCM08. (User name: Admin Password:12345)
-
6. Now you can modify the IP address, subnet mask and default gateway of CCM08 what you
need. You just need to modify eth0 and Apply.Please don’t change eth1. 7. Then modify the IP address, subnet mask and default gateway of computer again to make computer and CCM08 work at a same subnet.
Схемы, таблицы и рисунки — в просмотре документа выше. Клик по номеру страницы открывает её в просмотре.