Инструкция на Бойлеры косвенного нагрева IDM серии AQA 300/500

Текст инструкции

1. Стр. 2

   Contents THE ENERGYFAMILY 1. GENERAL INFORMATION 3 1.1. General information 1.2. Safety Instructions 1.3. Transport 1.4. Servicing and maintenance 1.5. Cleaning 1.6. Installing additional components 1.7. Installation Room 1.8. Protection of the environment 1.9. Standards and directives 2.…

2. Стр. 3 1. General Information

   General information THE ENERGYFAMILY 1.1. General infor mation 1.4. Ser vicing and maintenance Please read this documentation carefully. It contains important information for correct installation and safe and economical operation of the system. Regular maintenance as well as checking and servicing…

3. Стр. 4 1. General Information

   General information THE ENERGYFAMILY 1.8. Protection of the environment The hot water tank is made from high valuable materials, which are not allowed to be disposed like normal household garbage, but have to be disposed professional and proper according the regulations of the local authorities. A…

4. Стр. 5 2. Description

   THE ENERGYFAMILY 2.1. Description 2.2. Scope of deliver y The hot water tank AQA 300 and AQA 500 consists of high quality steel with a special enameling of the inner surface. AQA 300, AQA 500: - Boiler chassis with internal baretube, enameled - Magnesium-anode - PU-rigid foam insulation…

5. Стр. 6 3. Technical Specifications

   THE ENERGYFAMILY 3.1. Technical data AQA 300, AQA 500 Type Tech Data AQA 300 AQA 500 Storage capacity l 295 467 Usable storage capacity l 270 425 Register heating surface m² 3,5 5,9 Capacity tube register l 25 42 Max hot water temperature °C 55 55 One-time tap volume at 45°C tap temperature and 55°C…

6. Стр. 7 Technical Specifications

   THE ENERGYFAMILY 3.2. Dimensional drawings AQA 300, AQA 500 Plastic cover AQA 300 AQA 500 1 Plastic cover Thermometer 1 Anode PU-foam Thermometer Anode G 11/4“ 7 PU-foam 3 7 Stopple 11/2“ 5 1728 1835 1856 1975 3 1279 1369 6 Connection Ø750 Dimension Pos. Connection Stopple 11/4“ Stopple 11/4“ Ø 450…

7. Стр. 8 4. Installation

   Installation Installation THE ENERGYFAMILY 4.1. Setup conditions AQA 300/AQA 500 Set up the boilers as close as possible to the drinking water tap point, in order to keep the water routes as short as possible and prevent a circulation line. When storing, transporting and assembling the components…

8. Стр. 9 Installation

   THE ENERGYFAMILY 4.6. Filling, Emtying Corresponding filling- and emptying valves should be provide for easy filling and emptying. For frost-proof emptying the hot water tank must be emptied at the points provided for this. All non-return valves must be opened for this. 4.7. Water preparation In…

9. Стр. 10 5. Applications

   Overview Applications Overview 5.1. Drawing explanation and notes on the over view of the applications THE ENERGYFAMILY Symbol Meaning Heat emmitting system (Low-temperature heating) Legend and reference to the schemes Circulation pump IDM apply many and wide-ranging innovative technical solutions…

10. Стр. 11 5.2. Over view of applications

    Design variations Variation Code Chapter TERRA IL Complete + AQA + direct heating circuit N_2.10-7-10-0-1-0 5.2.1 TERRA ML 8-18 + AQA + direct heating circuit N_2.17-7-10-0-1-2 5.2.2 TERRA SW Complete HGL + AQA + TERMO + 1 HC N_1.3-0-10-11-1-0 5.2.3 TERRA SW + AQA + TERMO + 1 HC N_2.19-0-10-11-1-0…

11. Стр. 12 5. Applications Overview

12. Стр. 13 TERRA SW Complete HGL + AQA + TERMO + 1 HC N_1.3-0-10-11-1-0

13. Стр. 14 6. Magnesium protection anode

    Magnesium protection anode THE ENERGYFAMILY 6.1. General The anode, which is in the AQA 300l and AQA 500l must be subjected to a functional test in accordance to DIN 4753-3 for the first time after 2 years and subsequently annually. The replacement of the anode is described on the next page. 6.2.…

14. Стр. 15 Magnesium protection anode

    THE ENERGYFAMILY 6.3. Replace of the magnesium protection anode Before the magnesium protection anode can be replaced, the system must be depressurized by emptying of a small portion of water. The anode is placed under the black cover on the top of the buffer. The used anode is removed by a suitable…

15. Стр. 16 Always ther for you

    © iDM ENERGIESYSTEME GMBH Seblas 16-18 | A-9971 Matrei in Osttirol www.idm-energie.com | team@idm-energie.at iDM service technology: COMMISSIONING – SERVICING – ON-SITE SERVICE Our ser vice technicians are happy to help on - site. Contact details for your re gional customer ser vice cent re can be…

Схемы, таблицы и рисунки — в просмотре документа выше. Клик по номеру страницы открывает её в просмотре.