Инструкция на Адсорбционные осушители воздуха Condair серии DA 6000–27000 бренда Condair

2596474-B EN 2202

READ AND SAVE THESE INSTRUCTIONS INSTALLATION AND OPERATION MANUAL Desiccant dryer Condair DA 6000 - 27000 Dehumidification and Drying

Thank you for choosing Condair

Installation date (MM/DD/YYYY): Commissioning date (MM/DD/YYYY): Site: Model: Serial number: Proprietary Notice This document and the information disclosed herein are proprietary data of Condair Group AG. Neither this document, nor the information contained herein shall be reproduced, used, or…

Contents

1 Introduction 5 1.1 To the very beginning 5 1.2 Notes on the installation and operation manual 5 2 For your safety 7 3 Important notes 10 3.1 Inspection of the delivery 10 3.2 Storing/Transportation/Packaging 10 4 Product overview 11 4.1 Product designation 11 4.2 Applications 11 4.3 Method of…

9 Product specification 22 9.1 Technical data Condair DA 6000 - 27000 22 9.2 Dimensions Condair DA 6000 23 9.3 Performance charts DA 6000 24 9.4 Dimensions DA 8000 25 9.5 Performance charts DA 8000 26 9.6 Dimensions DA 13000 27 9.7 Performance charts DA 13000 28 9.8 Dimensions DA 19000 29 9.9…

Introduction 1.1 To the very beginning We thank you for having purchased the Condair DA 6000 - 27000 desiccant dryer (for short: Condair DA). The Condair DA desiccant dryers incorporate the latest technical advances and meets all recognized safety standards. Nevertheless, improper use of the Condair…

Symbols used in this manual

NOTE! The catchword “NOTE” used in conjunction with the hand symbol designates important notes in this manual that require special attention. CAUTION! The catchword "CAUTION" used in conjunction with the caution symbol in the circle designates notes in this operation manual that, if neglected, may…

For your safety General Every person working with the Condair DA desiccant dryer must have read and understood this installation and operation manual before carrying out any work. Knowing and understanding the contents of the installation and operation manual is a basic requirement for protecting…

Danger that may arise from the Condair DA desiccant dryer

DANGER! Danger of electric hazard! The Condair DA desiccant dryer is mains powered. Live parts may be exposed when the unit is open. Touching live parts may cause severe injury or danger to life. Prevention: Before carrying out any work set the Condair DA desiccant dryer out of operation (switch off…

Correct lifting and handling

Lifting or handling of components always carries an element of risk, and therefore must only be carried out by trained and qualified personnel. Ensure that any lifting operations have been fully planned and risk assessed. All equipment should be checked by a skilled and competent health & safety…

Important notes 3.1 Inspection of the delivery After receiving: 3.2 – Inspect shipping boxes for damage. Any damages of the shipping boxes must be reported to the shipping company. – Check packing slip to ensure all parts has been delivered. All material shortages are to be reported to your Condair…

Product overview 4.1 Product designation The product designation and the most important unit data are found on the label fixed on the frame on the service side of the Condair DA 6000 - 27000 desiccant dryers (see example below). Model DA 13000 Serial no. 1927 1908 Manuf. 2019 Voltage 400 V, 50 Hz…

Method of operation The desiccant dryer operates with two air streams. A larger air stream to be dehumidified, and a smaller air stream to exhaust the moisture out of the desiccant rotor. Two fans inside the desiccant dryer create air streams which travel through the desiccant rotor in opposite…

Product description The desiccant dryer is designed to meet the requirements of IEC protective class IP 44. 4.4.1 Casing The casing is fabricated from Aluzinc® steel and is insulated with 50 mm mineral wool, including inner panels. The sound- and heat-insulated construction with seals on the panel…

Heater for reactivation air The electrical reactivation heater is divided in three steps. The heater is equipped with over temperature protection. 4.4.6 Electrical panel The electrical panel is located in a separate compartment on the service side of the desiccant dryer. Switches and indications…

Installation 5.1 Installation and service access The Condair DA 6000 - 27000 desiccant dryers are designed for indoor installation, and must be installed in an upright position, preferably bolted to the floor. For maintenance purposes, the following minimum distances should be available on the…

Process- and dry air with the desiccant dryer installed in the dehumidified room When the desiccant dryer is installed in the dehumidified room space it would normally take the process air direct from the room without any duct system, with only a protection net for the inlet required. The dry air…

Commissioning On initial start-up, the following steps should be taken in this order: 1. Ensure that the external isolation switch is isolating the unit from the mains, and that the main switch on the desiccant dryer is set in the OFF position. 2. Open the service panels of the desiccant dryer and…

Maintenance 7.1 Important notes on maintenance Qualification of personnel All maintenance work must be carried out only by well qualified and trained personnel authorised by the owner. It is the owner’s responsibility to verify proper qualification of the personnel. General note The instructions and…

Filters The desiccant dryer is equipped with two separate filter banks, one for the process air and the other for the reactivation air. The filters are positioned at the respective inlets and will clean the air prior to entering the desiccant dryer. Intervals for cleaning or replacement of the…

Heater The reactivation electric heater does not need maintenance, but should be checked twice a year for any mechanical damage to the heating elements. 7.6 Rotor drive belt Check the belt tensioning at regular intervals. The tensioning is maintained constantly by the belt tension device, and should…

Troubleshooting Malfunction Possible cause of trouble Corrective action None, or reduced dehumidification capacity Filter dirty. Clean or replace filters. Electrical heater faulty. Check fuses. Airflow reduced. Check openings and dampers. No rotation of rotor. Check belt tensioning or PLC alarms.…

Product specification 9.1 Technical data Condair DA 6000 - 27000 2) DA 8000 DA 13000 DA 19000 DA 27000 Drying capacity at 20°C - 60% rH kg/h Nominal dry air volume m3/h 6000 8000 13000 19000 27900 Nominal reactivation air volume m3/h 1700 2500 4200 6000 6980 Nominal ext. pressure rocess air p Pa…

Dimensions Condair DA 6000

Performance charts DA 6000

Temperature rise (°C) 9.3 tP=30°C tP=20°C tP≤10°C Example: Given process air: XP = 9.0 g/kg, tP = +20°C Dry air: 3.5 g/kg, tT = 20 + 17.4 = 37.4°C XP = Absolute humidity process air XT = Absolute humidity dry air tP = Temperature process air tT = Temperature dry air Dry air volume flow [m3/h] Fig.…

Dimensions DA 8000

Performance charts DA 8000

Temperature rise (°C) 9.5 tP=30°C tP=20°C tP≤10°C Example: Given process air: XP = 9.0 g/kg, tP = +20°C Dry air: 3.5 g/kg, tT = 20 + 18 = 38°C XP = Absolute humidity process air XT = Absolute humidity dry air tP = Temperature process air tT = Temperature dry air Dry air volume flow [m3/h] Fig. 7…

Dimensions DA 13000

Performance charts DA 13000

Temperature rise (°C) 9.7 tP=30°C tP=20°C tP≤10°C Example: Given process air: XP = 9.0 g/kg, tP = +20°C Dry air: 3.5 g/kg, tT = 20 + 18 = 38°C XP = Absolute humidity process air XT = Absolute humidity dry air tP = Temperature process air tT = Temperature dry air Dry air volume flow [m3/h] Fig. 10…

Dimensions DA 19000

Performance charts DA 19000

Temperature rise (°C) 9.9 tP=30°C tP=20°C tP≤10°C Example: Given process air: XP = 9.0 g/kg, tP = +20°C Dry air: 3.5 g/kg, tT = 20 + 17.3 = 37.3°C XP = Absolute humidity process air XT = Absolute humidity dry air tP = Temperature process air tT = Temperature dry air Dry air volume flow [m3/h] Fig.…

Performance chart DA 27000

Spare parts NOTE! All spare parts data refer to a standard configured unit with electrical reactivation and nominal flow rates. 10.1 Spare parts Condair DA 6000 Part 10.2 Part No. Technical specification Numbers installed Numbers of recommended spare parts 1 Drive Motor SGM65/30-4, 230-240V 50Hz, 3…

Spare parts Condair DA 27000 Part Part No. Technical specification Numbers installed Numbers of recommended spare parts 1 Drive Motor Motovario, NMRV 30/50 1-500 1 Capacitor 0,5 µF 700 V 1 Belt pulley SPA Ø125mm 1 Drive belt SPA green 1 Belt tensioner Rosta SE11 + R11 1 Process air fan…

Component data NOTE! All performance and dimensional data refer to a standard configured unit with electrical reactivation, nominal flow rates and without cooling coils or other special modifications. 11.1 Component data Condair DA 6000 Unit part / Components Units Process air (dry air side)…

Component data Condair DA 8000 Unit part / Components Units Process air (dry air side) Reactivation air (wet air side) Rotor Fans Manufacturer Ziehl-Abegg Ziehl-Abegg ER40C-2DN.F7.1R ER35C-2DN.E7.1R - - 3 m /h Head pressure Pa 1770 2000 Available ext. pressure Pa 280 150 Standard motor IEC Standard…

Component data Condair DA 13000 Unit part / Components Units Process air (dry air side) Reactivation air (wet air side) Rotor Fans Manufacturer Fan type Speed rpm Model Air flow m /h Head pressure Pa Available ext. pressure Pa 3 Ziehl-Abegg Ziehl-Abegg ER71C-4DN.H7.1R ER35C-2DN.F7.1R - - 13000 4200…

Component data Condair DA 19000 Unit part / Components Units Process air (dry air side) Reactivation air (wet air side) Rotor Fans Manufacturer Fan type Speed rpm Model Air flow m /h Head pressure Pa Available ext. pressure Pa 3 ZIEHL-ABEGG ZIEHL-ABEGG ER71C-4DN.I7.1R ER40C-2DN.F7.1R 1460 2 875…

Component data Condair DA 27000 On request! 40 Component data

EU declaration of conformity EU declaration of conformity Condair Group AG Gwattstrasse 17 8808 Pfäffikon SZ Switzerland declare under own responsibility that the product: Condair Dehumidifier DA 500, DA 700, DA 800, DA 1000, DA 1100, DA 1400, DA 2400, DA 3400, DA 4000, DA 4400, DA 6000, DA 6400, DA…

42 Appendix 1 – electrical wiring diagram Appendix 1 – electrical wiring diagram

CONSULTING, SALES AND SERVICE

CH94/0002.00 Condair Group AG Gwattstrasse 17, 8808 Pfäffikon SZ, Switzerland Phone +41 11, Fax +41 info@condair.com, www.condairgroup.com

Инструкция на Адсорбционные осушители воздуха Condair серии DA 6000–27000

Текст инструкции

Новое в каталогах

Новое в инструкциях