Инструкция на Контроллеры серии pCO...
Руководство по эксплуатации электронных контроллеров pCO3 (обзор)
Смотрите также: Программируемые электронные контроллеры pCO1 →
Загружаем документ…
Текст инструкции
-
•1st feature
•Ratiometric pressure sensors: • • Up to 3 sensors for the small size • Up to 6 sensors for the medium, large and extra large sizes
-
•2nd feature
•Graphic built-in LCD (pGD0 and pGD1) a. Supports icon-based languages (i.e. Chinese) b. Allows for fully graphical features
-
•4th feature
•2 additional serial ports: Field Bus and Service Port •Field Bus: – MODbus Master (i.e. VFDs, Turbocor) – Belimo serial protocol (MP-Bus) – tLAN (pCO I/O expansion) – CAN bus (hydronic controls) – RS232 (Modem) •Service Port: •RS485 / RS232 plug-in boards – Commissioning – Testing and monitoring…
-
•5th feature: Processing
speed •pCO3’s program cycle will be approx. 3x faster than pCO2
-
•6th feature
-
•7th feature
•Increased memory size •pCO3 will features a 2+2 MB flash memory as standard. •Possibility to expand it with a NAND-Flash of 16MB: for data-logging, BMP file storage (pGD2/3), etc (in this case the 4MB of standard flash can all be used for the program. •Large volatile memory support: 512 k of RAM…
Схемы, таблицы и рисунки — в просмотре документа выше. Клик по номеру страницы открывает её в просмотре.