Инструкция на PCOWeb Carel
Руководство по эксплуатации PCOWeb системы TRAPS (система ловушки). С помощью ловушек pCOWeb может отправлять предупреждения к SNMP
Смотрите также: Основной документ →
Загружаем документ…
Текст инструкции
-
Document date: 13-Jan-2005 Introduction The TRAPs represent a way by which pCOWeb can send a warning – a SNMP coded message – to some receivers when a particular status comes active. The main reason for this mechanism is useful is that it is an “asyncronous”, i.e. a remote host is able to get a…
-
TOP HALF PAGE
The top zone of the top half page is devoted to the settings for up to four destination hosts: IP address, Community, enabling flag. IP address: must have the usual format: A.B.C.D (every number in decimal format). Example: 192.168.10.2. Community: the “Community” in SNMP standard is a string useful…
-
The configuration of the traps for this Digital Variable is contained in the table below the Variable selector. By these selectors you can change the configuration of the traps for the Digital Variable #1. If you want to check/change the Configuration of another digital variable, you first have to…
-
NOTE for release A1.2.3 – B1.1.3
The trap mechanism actually has a problem in the Acknowledge option, and, until the problem will be fixed, the use of this option is not advisable. The problem arises when pCOWeb is configured as to send traps with Acknowledge and some host is not able to send back the requested Acknowledge. In that…
Схемы, таблицы и рисунки — в просмотре документа выше. Клик по номеру страницы открывает её в просмотре.