Каталог продукции ISAN 2021 - Дизайнерские радиаторы EXACT

Текст каталога

1. Стр. 1 2nd edition

   Radiant convectors

2. Стр. 2 About the Company

   The ISAN trademark represents a traditional Czech manufacturer of heating units with a history that goes back more than 60 years. ISAN Radiátory s.r.o. has been involved in the development and manufacture of convectors for over 16 years. First-rate technological procedures and the progressive…

3. Стр. 3 Warmth that will adapt …

   Contents About the Company 2 Thermostatic Packs 22 Exact Basic Information 4 Accessories 25 Radiant convectors K21 / K22 / K22W K32 / K33 / K33W K43 / K44 / K44W K54 / K55 / K55W 6 26 Heating output of convectors ∆T=60 K ∆T=50 K ∆T=40 K ∆T=30 K 12 Convector Design Options Atypical lengths, Angled…

4. Стр. 4 Exact

   Basic Information Application Radiant convectors are a popular alternative to heating modern interiors. They can be installed in front of large glass walls or windows with low window sills, in the interior open space, as well as on the wall. The units feature a significant convection heating…

5. Стр. 5 Top grille

   Window screen for window installations Outer heat transfer fins K33W K33 Air vent K32 Lamellar radiant surface conducting the heat transfer fluid Inner heat transfer fins Floor bracket with a plastic cover Wall bracket Design The EXACT units are characterized by their robust design with a sturdy…

6. Стр. 6

   Exact | Convectors and Lamellar Radiators | www.isan.cz

7. Стр. 7 Radiant

   convectors 6-25 Exact | Convectors and Lamellar Radiators | www.isan.cz 7

8. Стр. 8

   Narrow convectors can both warm up and provide radiant heat to a space. The 70 mm high units can be used as part of façade heating systems or built into church pews. Higher models achieve an optimal radiation-convection ratio, while ensuring an adequate heat output. The units are inconspicuous…

9. Стр. 9

   The most popular convectors, compact adequate dimensions mensions with a sufficient heat output for most applications ranging from apartments, tments, offices and commercial premises to waiting rooms, hallways and d warehouses. The convectors are available in a wide range of connection ection options.…

10. Стр. 11

    Open-plan and high-ceiling spaces in particular require ire powerful units to provide adequate heating. Common in historic buildings where ere high heat loss is a concern. Some models can be integrated into a shaft or used as an artistic, massive monolith. Higher radiant and convection heat outputt…

11. Стр. 16 Floor stands and wall brackets

    The supplied stands and brackets allow for the unit to be fixed securely to the wall or floor. The mounting system has been designed to provide an adequate support to the considerable weight of the Exact convectors. The load-bearing capacity of the substrate is equally important. Possible solutions…

12. Стр. 17 Flat floor stands – Subtle

    Flat floor stands made of strip steel. Each floor stands includes a plastic cover and fastening components with a locking mechanism to prevent the unit from disengaging. The convector type must be fully specified when placing an order. Covers Available plastic covers 110 × 50 mm Unless the order…

13. Стр. 18 Wall brackets

14. Стр. 19 Convector Parameters

15. Стр. 20 Heating System Connection

16. Стр. 21 EF bottom

    E FE bottom F E F MS middle SM middle M S M S VL with thermostatic valve on the left VR with thermostatic valve on the right VL VR ML middle with thermostatic valve SR middle with thermostatic valve ML SR EE one-sided inside Block stand FF one-sided inside Block stand (in-line connection see p. 38)…

17. Стр. 22 Thermostatic Packs

    Thermostatic set Angular – triax R L illustration image Pack nr. 101L / white / left / Code: O37BUCL101 Pack nr. 101R / white / right / Code: O37BUCR101 Pack nr. 103L / chrome / left / Code: O37CUCL103 Pack nr. 103R / chrome / right / Code: O37CUCR103 Pack nr. 105L / INOX / left / Code: O37NUCL105…

18. Стр. 23 Thermostatic valve

    Corner – middle illustration image Pack nr. 119L / white / left / Code: O37BWCL119 Pack nr. 119R / white / right / Code: O37BWCR119 Pack nr. 122L / chrome / left / Code: O37CWAL122 Pack nr. 122R / chrome / right / Code: O37CWAR122 Pack nr. 219L / black / left / Code: O37SWCL219 Pack nr. 219R / black…

19. Стр. 24 LockShield set

    corner illustration image Pack nr. 181 / white / Code: O37BRC-181 Pack nr. 183 / chrome / Code: O37CRC-183 Pack nr. 185 / INOX / Code: O37NRC-185 Pack nr. 182 / white / Code: O37BRA-182 Pack nr. 184 / chrome / Code: O37CRA-184 Pack nr. 186 / INOX / Code: O37NRA-186 Connection to copper pipes Ø 15 mm…

20. Стр. 25 Accessories

    To facilitate preheating or cloth drying the convector can be fitted with designer accessories such as magnetic rails and hooks. The components are available in a chrome finish. Magnetic rail A magnetic rail in three length variations (sized up to the outer edges) Description Madlo 260 mm Madlo 430…

21. Стр. 26 Convector Design

    Options 26-31 All convector units can be adapted to the architect’s requirements. We are always prepared to answer your questions concerning the viability of your design solution and adapt the heating units to the interior. 26 Exact | Convectors and Lamellar Radiators | www.isan.cz

22. Стр. 27 таблицы и схемы — в просмотре

23. Стр. 28 A

    L B Atypical lengths In applications where the length needs to match the space in alcoves or between pillars, all convector radiators can be ordered in lengths with 1cm increments. When determining the total length of a convector, consideration must also be given to the size of the thermostatic…

24. Стр. 29 Curve

    Not all interiors feature a strictly square layout. In fact, curved walls are not that uncommon when it comes to both historic and modern buildings. The manufacturer should be consulted first about this convector option to confirm the suitability of the curved design for a particular model and the…

25. Стр. 30 Convectors with a wooden top

    A stylish wooden top turns a heating unit into a practical designer piece. It can be used as a bench, shelf or a handy countertop. Its applications include hallways, waiting rooms, auditoriums or lobbies to sit or place garments on when putting on shoes. The wooden top is available for K32, K33W…

26. Стр. 31 Convectors for sanitary environments

    In sanitary environments, a particular emphasis is placed on the ease of cleaning the convector surfaces. This requires an open design that facilitates the removal of dust and debris from all inner and outer surfaces of the heating unit. Convectors for sanitary environments have been modified to…

27. Стр. 32 Exact Convector

28. Стр. 33 таблицы и схемы — в просмотре

29. Стр. 38 EE, FF connection options – Block floor brackets

30. Стр. 39 таблицы и схемы — в просмотре

31. Стр. 40

    Exact | Convectors and Lamellar Radiators | www.isan.cz

32. Стр. 41 Complementary

    Products 40-44 Exact | Convectors and Lamellar Radiators | www.isan.cz 41

33. Стр. 42 Complementary products

    If you want original heating units in your home, try designing your own thick-walled steel radiators. Thanks to the manual manufacture of EXACT convectors, we are able to offer a variety of alternatives to our products. Given their increased size, these heating units are regarded as radiators. To…

34. Стр. 43 Horizontal radiators without fins

    Light-weight radiant heating units “Maximum” output is not always the most important aspect of a radiator. At a time when low-energy or passive homes are on the rise, there are tangible benefits in opting for large radiant units that look great at the same time. The available range of sizes works…

35. Стр. 44 Vertical radiators without fins

    Turning standard design radiators upright gives the lamellar units an entirely new appearance. Vertically mounted heating units will bring elegance to any interior. With the width starting at 280 mm and the height ranging up to 3000 mm, they can be customized to fit any project. The F10L model…

36. Стр. 45 Colour Reference Chart

    colour series RAL 9016 colour series S09 colour series RAL 9001 shade snow-white shade snow-white shade ivory finish - finish texture finish - extra charge - extra charge 30 % extra charge 30 % order code 01 order code 68 order code 04 colour series S31 colour series RAL 9018 colour series S08 shade…

37. Стр. 46 Coding

    1-4 5-8 9-12 13-14 15-16 17 K22W 0210 1650 AB 01 T PRODUCT HEIGHT LENGTH CONNECTION COLOUR ATYPICAL/ STANDARD The K22W radiant convector, with two radiant and two convection heat-transfer surfaces and a window screen to prevent heat escaping through the window, convector height 210 mm, atypical…

38. Стр. 47 Floor stands and wall brackets

39. Стр. 48 G0901-EN / All rights to changes and printing errors reserved

    ISAN Radiátory s.r.o | Poříčí 26, 678 01 Blansko, CZ CZ | Tel.: +420 | Fax: +420 | obchod@isan.cz | www.isan.cz SK | Tel.: +420 | Fax: +420 l obchod@isan.sk | www.isan.sk Export | Tel.: +420 | Fax: +420 | sales@isan.cz | www.isan.cz

Схемы, таблицы и рисунки — в просмотре документа выше. Клик по номеру страницы открывает её в просмотре.